Vakuumska črpalka

Vacuum pump Am120 nac

Stanje: kot nova (razstavni stroj), ATEX-CERTIFIED PUMP Oil-sealed rotary vane vacuum pump. Available in stock. Fully overhauled pump with warranty. Rated flow: 30 m³/h at 50Hz. Hnsdpfx Asftzgxsbxjn Ultimate vacuum: 1x10^-3 mbar abs. For any further questions, please contact us.

Stanje: novo, Modern, precise column drilling machine for production, based on the proven UNIMAX 3 concept, featuring stepless feed drive, automatic tool ejector, and standard chip breaking control. The digital display shows feed rate, spindle speed, and drilling depth. Equipped with a forward/reverse switch and emergency stop button. Full motor protection included. Pre-configured machine with special equipment: thread cutting attachment, retraction function, and LED lamp. Standard drilling capacity in E 335: 30 mm Thread cutting capacity: M 20 Spindle: MT 3 Hodpfx Ajf Ey Auebxonn Feed rate steplessly adjustable: 30 - 400 mm/min Programmable drilling depth: 125 mm Throat: 260 mm Spindle-to-table distance: 90 to 840 mm Table size: 500 x 365 mm Column diameter: 110 mm Overall height: 1,900 mm Weight: 280 kg Two-speed motor: 0.8/1.5 kW Infinitely variable spindle speeds Drilling Range A: 80 - 1,440 rpm Drilling Range B: 180 - 3,200 rpm Pre-configured machine including special equipment: - Thread cutting attachment - Retraction function - LED lamp

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Inv.119140, skupna dolžina: 26.000 mm, skupna širina: 9.000 mm, Oprema: kabina, osvetlitev, 1 used painting line, featuring a circulating conveyor system, manual paint booth for sample work, automatic paint booth equipped with a robot and workpiece rotary holder, reverse osmosis unit for deionized water, paint preparation, and exhaust air treatment. The system is currently in operation on a two-shift basis for serial production. Manual loading and unloading onto a conveyor belt; the remainder of the process is fully automated. Change as of 18.7.25: Dismantling to be carried out by the buyer at the Lohr facility starting September 2025. All costs for dismantling, as well as for packaging, collection, and transport to the buyer’s site (FCA), are to be borne by the buyer. The area must be completely cleared for installation of new production machinery by mid-January 2026 at the latest. For further details, please refer to the attached handout/flyer. Due to the high complexity of dismantling, early and careful planning with the responsible dismantling contractor is mandatory. Timely contact and/or site visit at the factory is also recommended. Further information can be found in the attached handout. --- Hnsdpfxowqg Iio Abxjn Information in English, French, or Spanish available upon request. --- Please state your offer price. Sale only within the EU, Switzerland, Turkey, and the United Kingdom. Dismantling is to be organized by the buyer. --- Sold without packaging; any and all warranty claims are excluded. If you intend to carry out dismantling yourself, please indicate this in your offer. We do not guarantee the accuracy of the technical data, the completeness of accessories and tooling, or compliance with all safety and environmental protection requirements as stipulated by applicable accident prevention regulations.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, X-os 550 mm Y-os 350 mm Hnodozcpifjpfx Abxjn Z-os 400 mm Maks. dimenzija obdelovanca 1.200 x 700 x 400 mm Maks. teža obdelovanca 1.500 kg Teža stroja 2.850 kg Območje rezanja 30 stopinj pri 400 mm Vključno z navodili za uporabo Stroj je možno videti pod napetostjo.

Stanje: generalkompletno obnovljen (rabljeno), PC control (Power Control) Software No. 2 motorised through-feed conveyor belts No. 2 horizontal drilling supports (digital display of the position data for axes) No. 2 drilling units for each horizontal drilling support (1 x 1.5 kW) No. 11 spindles for each horizontal drilling unit Maximum working width (mm): 3000 Minimum working width (mm): 250 No. 6 lower vertical drilling supports (digital display of the position data for axes) No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) No. 11 spindles for each drilling unit on the lower drilling supports Hnodpfsvhcbzsx Abxjn No. 2 upper vertical drilling supports (digital display of the position data for axes) No. 2 drilling units for each upper vertical drilling support (2 x 1.5 kW) No. 11 spindles for each drilling unit on the upper drilling supports No. 6 upper vertical workpiece clamps Chip conveyor belt Total connected load (kW): 50 / 60 (approx.)

Stanje: generalkompletno obnovljen (rabljeno), mechanically processed, final pressure: 1.5 x 10^1 mbar, 1-year warranty Hnsdpfx Abertai Esxsn

Stanje: rabljeno, številka stroja/vozila: 007202, Max. panel width: 2500 mm Max. panel length: 1000 mm Hsdpfx Abou Rv Ukoxonn Number of units: 3

Stanje: dober (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, GF AgieCharmilles CUT 2000 S drátová elektroerozivní řezačka (EDM stroj) – Rok výroby 2015 – Upínací systém EROWA Vysoce přesný CNC drátový elektroerozivní stroj GF AgieCharmilles ve velmi dobrém technickém stavu. Výrobce: GF AgieCharmilles Model: CUT 2000 S Rok výroby: 2015 Pohyby os: Osa X: 350 mm Osa Y: 250 mm Osa Z: 256 mm Maximální rozměr obrobku: 750 × 550 × 250 mm Maximální hmotnost obrobku: 400 kg Provozní hodiny: Celkový provoz: 73 182 h Eroze: 16 508 h Technické údaje: Příkon: 3 x 400 V Hmotnost stroje: cca 3 500 kg Vybavení: • Automatické navlékání drátu • CNC řídicí systém GF AgieCharmilles • Kompletní upínací balíček EROWA v ceně Hodpfx Aey Udvfebxonn • Více upínacích prvků a příslušenství EROWA • Přesné elektroerozivní přípravky a příslušenství (viz foto) Výhody: • Velmi spolehlivý stroj pro nástrojařství a výrobu přesných dílů • Vysoká přesnost řezu a vynikající povrchová kvalita • Moderní řídicí systém GF AgieCharmilles Stav: Stroj je v dobrém provozním stavu. Stroj je zapojen a lze ho na místě odzkoušet pod proudem. Místo: Česká republika Dostupnost: Ihned

Stanje: dober (rabljeno), Leto izdelave: 2015, Ta inšpekcijski sistem Zumbach Electronics AG je na voljo pri Plastima Used Machinery v skladišču strojev. Stroj je iz leta 2015 in je v dobrem stanju. – Znamka: Zumbach Electronics AG – Model: Simac 63 – Leto izdelave: 2015 – Število kamer: 3 Hodpfjtpnfbjx Abxjnn – Minimalni premer cevi: 2 mm – Maksimalni premer cevi: 50 mm

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2013, Oprema: hladilnik, Žična elektroerozijska mašina AGIECHARMILLES model CUT400, letnik 2013 Pomiki: X 800, Y 550, Z 510, U 800, V 550 mm. Maksimalna koničnost: 30°/510 mm. Maksimalne dimenzije obdelovanca: 1.300 x 1.000 x 510 mm. Maksimalna teža obdelovanca: 3.000 kg. Hnodpezbimhsfx Abxon Višina vpenjanja do 510 mm. Razpoložljiv premer žice: 0,10-0,33 mm. Najboljša površinska obdelava: 0,20 Ra. Koluti do 25 kg. SKUPINA HLADILNIK. Volumen dielektrika: 1.700 litrov. VKLJUČENA PROGRAMSKA OPREMA: TAPER-EXPERT, CT-EXPERT, PROFIL EXPERT, POWER EXPERT, SURFACE EXPERT. Široka izbira tehnologij za najpogostejše kombinacije materialov (obdelovanec/žica).