Avtomatska linija za barvanje

b+m Surface Systems

Stanje: rabljeno, Leto izdelave: 2004, 10-vretena naprava. Priključna moč: 380/400V/50Hz, 34 kW. Debelina stekla: 3-60 mm. Kjdpowynzcsfx Abxedn

Stanje: pripravljen za uporabo (rabljen), Erfurt PKZe 500/1000 trimming press Pressing force: 500 t Table dimensions: 1020 x 1420 mm Kdedpfx Abjvbcxtsxjn Stroke: 400 mm Strokes per minute: 12 Main motor power: 41 kW Video available

Stanje: novo, Vacuum Lifter BARBARIC B3, Swivelling, incl. Crane - Demonstration Unit - Includes: - Vacuum lifter BARBARIC uniWood UWL 3, 150 kg For vertical and horizontal transport of flat, standard panels (coated panels, natural wood panels) up to a panel size of 3,000 x 2,100 mm - Tilt range of 90° with pneumatic tilting device - Complete unit with hoist and corresponding safety devices (vacuum gauge and hand slide valve with mechanical safety lock) - uniWood crossbeam with 2 suction pads Ø 270 mm on an adjustable traverse (Traverse length: 1,500 mm) Kedpfxsu R Szaj Abxsdn Includes: - Option: Reinforced version BARBARIC uniWood for slightly porous panels Load capacity: 250 kg With 2 oval suction pads 500 x 250 mm on an adjustable traverse (Traverse length: 1,250 mm) and reinforced vacuum pump for porous panels. The reinforced version allows lifting of materials up to 250 kg. Includes: - Option: Comfort operation BARBARIC uniWood All controls for the hoist and vacuum lifter are integrated in a single control unit – our special handling grip. This enables operation of the system and load guidance in single-hand mode. The lifting process can be infinitely controlled via frequency converter. The comfort version is supplied complete with hoist and corresponding safety devices (vacuum gauge and 2-button safety release control). Includes: - Column-mounted slewing crane BARBARIC Load capacity on the lifting device: 250 kg The indicated load capacity refers to the usable load on the lifting device. Barbaric slewing cranes are designed for handling tasks in all application areas and are extremely lightweight in construction. SSK consists of column, bracket, and smooth-running jib. Swivelling and trolley movement by hand. The prerequisite for installation is a proven concrete floor (C20/R5, min. 20 cm thick). Static verification of the floor must be carried out and documented by the customer. For fixing on cracked concrete or weak substrates, oversized base plates are available on request. Mounting: Supplied with adhesive anchors for concrete floors. If ordering without hoist, please specify the required cable or hose arrangement! Delivery includes: manual trolley, energy supply, and compressed air connection. - New demonstration machine -

Stanje: kot nova (razstavni stroj), ATEX-CERTIFIED PUMP Oil-sealed rotary vane vacuum pump. Available in stock. Fully overhauled pump with warranty. Rated flow: 30 m³/h at 50Hz. Kdjdeftzgxepfx Abxjn Ultimate vacuum: 1x10^-3 mbar abs. For any further questions, please contact us.

Stanje: novo, SAPI Praškasto Barvanje Popolna prevleka za dolgo zaščito. Praškasto barvanje je zelo učinkovita in široko uporabljena metoda za nanašanje zaščitne in dekorativne površine na različne vrste substratov. Gre za suhi postopek, pri katerem se fina prah, sestavljena iz smol, pigmentov in dodatkov, nanese na substrat. Prah je elektrostatično napolnjen, zato se enakomerno oprime površine in ustvari enakomerno prevleko. Za dosego optimalne oprijemljivosti in trajnosti se substrat najprej temeljito očisti in pripravi. Olja, umazanija in druge nečistoče se odstranijo, da se zagotovi čista površina. To je ključnega pomena, da se prah učinkovito poveže s substratom in ustvari trdno in dolgo obstojno prevleko. Komponente Praškastega Barvnega Sistema Tipičen sistem praškastega barvanja je sestavljen iz več komponent in naprav, potrebnih za nanašanje in strjevanje praškaste prevleke. Kabina za Pršenje in Območje Pršenja Kabina zagotavlja čisto okolje za postopek nanašanja in zagotavlja enakomerno porazdelitev praška. 🎨 Pištola za Praškasto Barvanje Pištola za praškasto barvanje se uporablja za nanašanje praškaste prevleke na delovni kos. 💨 Sistem za Napajanje s Praškom Sistem za napajanje s praškom je sestavljen iz lijaka ali posode, v kateri je shranjen material za praškasto barvanje. Običajno vključuje naprave, kot so črpalke za prah, dovodne cevi in sita, ki prah prenašajo iz skladišča do pištole za pršenje. 🔄 Napravite za Predobdelavo Kdjdpfxeun Sd Uj Abxen Sistemi za predobdelavo se uporabljajo za pripravo substrata pred nanašanjem praškaste prevleke. To lahko vključuje postopke, kot so čiščenje, razmaščevanje, izpiranje in obdelava površine, da se zagotovi dobra oprijemljivost in trajnost prevleke. 🧼 Peč za Strjevanje Peč za strjevanje je ključna komponenta praškastega barvnega sistema. Uporablja se za segrevanje prevlečenega substrata na ustrezno temperaturo, da se prah stopi, tekoče preide in strdi v trajno površino. Peč običajno vključuje sistem za transport ali police, ki prenašajo prevlečene dele skozi peč. 🔥 Sistem za Odsesavanje V sistemu je nameščen sistem za odsesavanje, ki odstranjuje odvečni prah, pare ali hlapne spojine, ki nastanejo med postopkom nanašanja prevleke. Pomaga pri ohranjanju čistega in varnega delovnega okolja za osebje in preprečuje kopičenje prahovih delcev v zraku. 🌬️ Iščete rešitev za Praškasto Barvanje? Iščete prilagojeno rešitev za praškasto barvanje? Specializirani smo za zagotavljanje rešitev za praškasto barvanje, ki so prilagojene vašim specifičnim potrebam. Ne glede na to, ali imate specifične zahteve glede barve, kompleksnih zasnov ali težkih substratov, je naš izkušen tim pripravljen zagotoviti izjemne rezultate. 💡 Kontaktirajte nas še danes, da se pogovorimo o vaših potrebah in nam dovolite, da razvijemo prilagojeno rešitev za praškasto barvanje. 📞 Kontaktirajte nas še danes!

Stanje: novo, Modern, precise column drilling machine for production, based on the proven UNIMAX 3 concept, featuring stepless feed drive, automatic tool ejector, and standard chip breaking control. The digital display shows feed rate, spindle speed, and drilling depth. Equipped with a forward/reverse switch and emergency stop button. Full motor protection included. Pre-configured machine with special equipment: thread cutting attachment, retraction function, and LED lamp. Standard drilling capacity in E 335: 30 mm Thread cutting capacity: M 20 Spindle: MT 3 Feed rate steplessly adjustable: 30 - 400 mm/min Programmable drilling depth: 125 mm Throat: 260 mm Spindle-to-table distance: 90 to 840 mm Table size: 500 x 365 mm Column diameter: 110 mm Overall height: 1,900 mm Weight: 280 kg Two-speed motor: 0.8/1.5 kW Infinitely variable spindle speeds Drilling Range A: 80 - 1,440 rpm Drilling Range B: 180 - 3,200 rpm Kdsdpfof Ey Auex Abxsn Pre-configured machine including special equipment: - Thread cutting attachment - Retraction function - LED lamp

Leto izdelave: 1999, stanje: zelo dobro (rabljeno), TRIULZI-IG glass tilting table Hydraulic Equipped with steering castors The rollers lower to enable 360-degree movement of the glass (for sealing purposes). Kodpfoiy Dtbsx Abxedn Length: 3600 mm, Working height: 2400 mm Good working condition Good overall condition As is Immediately available

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, vhodna frekvenca: 50 Hz, vhodna napetost: 400 V, pritisk: 6 letvica, LiSEC, KSR-25, right – left, year of manufacture 2010 Vertical glass seaming machine, h = 2.50 m In fully automatic cycle, the compact seaming machine grinds the edges of glass panes on all four sides. Kdjdpsv Eguyefx Abxon Inspection during production is possible by appointment. In very good working condition. Available: March / April 2025

Stanje: dober (rabljeno),

Stanje: dober (rabljeno), Leto izdelave: 2000, Rated power: 430 kW Dimensions: Overall length: 10,750 mm Kdedpfx Abeip T T Hjxsn Width: 3,400 mm Height: 3,900 mm