Stroj za gradnjo koč za hiše iz brun

Unbekannt TS 240

Stanje: dober (rabljeno), Leto izdelave: 2011, Krauss Maffei Injection Moulding Machine KM 850-12000 MX With Krauss Maffei robot Year of manufacture: 2011 Hydraulic-mechanical two-platen clamping system with 4 pressure pads and 4 locking units on the moving platen. PV - injection unit stroke control. MC 5 control system with colour monitor, integrated control panel, and USB data carrier. Plasticizing unit Complete plasticizing unit for thermoplastics with screw diameter 135 mm, with non-return valve and open nozzle. Nozzle radius 25 mm, nozzle orifice 9 mm TECHNICAL DATA Clamping unit - Clamping force: 8500 kN Csdpfxetrya Re Agqogw - Opening force: 560 kN - Mounting platen dimensions (h x v): 1600 x 1600 mm - Tie bar clearance (h x v): 1140 x 1140 mm - Opening stroke: 1600 mm - Mould height (min-max): 500 - 1100 mm - Daylight: 2100 mm - Ejector stroke: 300 mm - Ejector force: 200 / 100 kN Injection unit - Screw diameter: 135 mm - Injection pressure: 1389 bar - Shot volume: 8588 cm³ - Shot weight for PS: 6098 g - Injection rate: 1414 cm³/s Electro-hydraulic equipment - Rated motor power (pump): 132 kW - Dry cycle time according to Euromap 6: 965 1/h - Oil tank capacity: 2440 l Weight and dimensions - Net weight with control cabinet: 49 t - Installation space (L x W x H): 11.72 x 2.92 x 2.71 m

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, A complete 5-layer co-extrusion blown film line with 5 extruders and all peripheral equipment is available. Overall system dimensions (L/W/H): 14m/22m/11m. Die head: Kiefel Worms FSBK 500 with IBC, die diameter: 500mm, film width range: 700mm-2000mm, haul-off width: 2000mm, winding width: 2000mm, line speed: 120m/min, melt output: 500kg/h, total power requirement: approx. 300kW. 1) Double winder by Wintech, winding width: 2000mm, film thickness range: 35µm-150µm, max. roll diameter: 1000mm, max. roll weight: 1900kg, core inner diameter: 152mm/6 inches. 2) Extruder Kiefel Worms 70.29D, power: 89kW, screw: 5-zone barrier screw, speed: 125rpm, overhauled: 2010. 3) Adhesion-promoting extruder Kiefel Worms 50.25D, power: 34kW, screw: 3-zone barrier screw, speed: 200rpm. 4) Central extruder Kiefel Worms 50.25D, power: 34kW, screw: 3-zone core progressive screw, speed: 175rpm. 5) Adhesion-promoting extruder Kiefel Worms 50.25D for the outer layer, power: 34kW, screw: 3-zone barrier screw, speed: 200rpm. 6) Outer layer extruder Kiefel Worms 80.25D, power: 125kW, screw: 5-zone barrier screw, speed: 150rpm. 7) Film calibration device Reinhold SRK 200/9.6. The entire line is controlled by a Plast Control system. Further features include: integrated width measurement, C-Scan for profile measurement, web guiding system, corona treatment, and film draw-off. Included: one spare 5-layer FSBK die head with IBC, spare rollers, ring gap blower with filter, extraction units, crane, and external control terminal. Documentation available. On-site inspection possible. Cgodpfx Aov T An Sjgqew

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, Na voljo je sušilnik Cremona. Sekcije: 6, temperaturne cone: 2, hladilni del: 1, širina: 4200 mm. Proizvodna zmogljivost: cca. 80 listov/min. Dokumentacija je na voljo. Ogled na lokaciji je možen. Cgedpfx Aew I E Dpsgqjw

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Blockhouse Milling Machine BL100A, fully factory-refurbished with manufacturer’s warranty For laminated logs up to 140mm thickness, construction height up to 200mm, machining length up to 9.0m • Infeed table (toothed belt transverse conveyor) and entry table for timber lengths up to 9m • Blockhouse Milling Machine BL100A – four-sided moulder with hydro-pneumatic feed, 2x4kW / 2x3kW for cross-section approx. 140x220mm • Carbide reversible knife tooling for wall thickness approx. 40–100mm included • End groove milling unit 3.0kW, cutter width 21–40mm • Drilling unit with guide and drill bit D=20mm • Integrated under-table crosscut saw 4.0kW, blade diameter 500mm • Pneumatic workpiece clamping with horizontal jaws • Outfeed table 9m with push-off device and material storage table 6x1.5m • Servo positioning system with IPC control and IITO Control Software • Label printer for component marking, laser printer for printing production lists Cgsdpoxxhwljfx Agqjw • Excellent condition, factory-refurbished & fully serviced, with parts warranty, delivered ready for operation • Pricing & lead time on request. Subject to prior sale and all rights reserved

Stanje: novo, Leto izdelave: 2025, trajanje garancije: 12 meseci, največja višina reza: 120 mm, največja širina rezanja: 200 mm, moč: 16 kW (21,75 KM), Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Machine for machining components for modern log house construction, offering the perfect price-performance ratio for beginners, small-scale productions, or as an addition for special parts. Components are placed and positioned manually – after activation of the processing unit using the two-hand control buttons, the milling operation runs automatically. Optional roller tables and positioning stops are available to assist with the positioning of the components. Codpfjwnt Htsx Agqogw

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2004, automatic fan baler after complete overhaul, automatic Cgedpfx Agolnanwoqsw

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, obratovalne ure: 200 h, Funkcionalnost: popolnoma funkcionalen, premer vijaka: 65 mm, skupna masa: 9.000 kg, vpenjalna sila: 785 kN, skupna širina: 1.800 mm, skupna dolžina: 4.500 mm, skupna višina: 3.000 mm, moč: 0,045 kW (0,06 KM), Oferujemy na sprzedaż lekko używaną wtryskarko-rozdmuchiwarkę w doskonałym stanie. Maszyna jest podłączona i w pełni sprawna, możliwość prezentacji podczas pracy. Cgsdpfothk Rzex Agqow Możemy również zaoferować kilka gotowych form do produkcji kanistrów oraz kloszy lamp. Maszyna przystosowana jest do pracy z tworzywami typu PMMA, PC, PP oraz PE.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 900 mm, premer struženja nad prečnim suportom: 630 mm, premer struženja: 450 mm, moč vretenovega motorja: 22.000 W, hitrost vretena (min.): 38 obr/min, največja hitrost vretena: 3.800 obr/min, izvrtina vretena: 80 mm, potovalna razdalja osi X: 580 mm, pomik osi Y: 160 mm, pomik po osi Z: 945 mm, montažni premer: 130 mm, hitro pomikanje X-os: 40.000 m/min, hitri pomik os Y: 26.000 m/min, hitri pomik na osi Z: 40.000 m/min, skupna višina: 2.600 mm, skupna dolžina: 3.750 mm, skupna širina: 2.050 mm, nos vretena: JIS A2-6, pomik osi W: 1.000 mm, Oprema: dokumentacija / priročnik, Turn-Mill Center OKUMA Multus B300-W TECHNIČNE LASTNOSTI: CNC krmilnik: OSP-P200L Razdalja med konicami: 900 mm Največji premer obdelave: 630 mm Višina konic nad vozičkom: 630 mm Največji premer vrtenja nad posteljo: 630 mm Pomik X osi: 580 mm Pomik Y osi: -80 / +80 mm Pomik Z osi: 935 mm Pomik W osi: 1000 mm Natančnost indeksiranja B osi: 0,001° Največja hitrost glave za rezkanje: 10.000 min⁻¹ (rpm) Priključek vretena rezkalne glave: HSK-A63 Največja moč vretena za rezkanje: 16 kW Kapaciteta zalogovnika orodij: 60 Največja dolžina orodja: 300 mm Največji premer orodja: 130 mm Največja teža posameznega orodja: 8 kg Hitri pomik X osi: 40.000 mm/min Hitri pomik Z osi: 40.000 mm/min Hitri pomik Y osi: 26.000 mm/min Hitri pomik W osi: 20.000 mm/min Nos vretena: JIS A2-6 Minimalna hitrost vretena: 38 min⁻¹ (rpm) Maksimalna hitrost vretena: 5.000 min⁻¹ (rpm) Codpfxsw Eip So Agqsgw Prirastek C-osi: 0,001° Moč glavnega vretena: 22 kW Nos protivretena: JIS A2-6 Minimalna hitrost protivretena: 38 min⁻¹ (rpm) Maksimalna hitrost protivretena: 5.000 min⁻¹ (rpm) Moč protivretena: 15 kW Skupna priključna moč: 39,3 kVA Nazivni tok: 56,7 A Napajalna napetost: 400 V Dimenzije stroja: 4340 x 2050 x 2600 mm DODATNE INFORMACIJE: x1 programska oprema One-Touch IGF (CD-ROM tudi za PC programiranje) x1 daljinsko elektronsko ročno kolo x1 dvobarvna signalna svetilka x1 odvajač odrezkov x1 rezervoar za hladilno tekočino

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, skupna masa: 120.000 kg, skupna višina: 5.600 mm, stiskalna sila: 1.250 t, zračni tlak: 6 letvica, razdalja med stranskimi nosilci: 1.200 mm, razdalja med stojali: 1.400 mm, hod: 500 mm, dolžina mize: 1.850 mm, širina mize: 1.600 mm, Ravnostranski ekscentrični stiskalnik ERFURT tip PKZe 1250 Odlično delovno stanje, po popolni, profesionalni obnovi. Po obnovi ni bil uporabljen. Specifikacije: Kapaciteta: 1250 ton sile Hod drsnika: 500 mm Nastavitev drsnika: 215 mm Maksimalna zapiralna višina med podložno ploščo in drsnikom (hod dol, nastavitev gor): 860 mm Delovna površina mize (širina x globina): 1600x1850 mm Delovna površina drsnika (širina x globina): 1300x1400 mm Odprtina na mizi (širina x globina): 1100x1100 mm Cgodoubyrxspfx Agqow Moč glavnega motorja: 90 kW pri 1478 vrt/min Moč motorja za nastavitev berana: 7,5 kW pri 1450 vrt/min Število posameznih hodov: 8 min-1 Kapaciteta blazine: 200 ton sile Hod blazine: 200 mm Višina nad tlemi: 7900 mm Teža stiskalnice: 130.000 kg.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2015, I am selling an automatic CNC processing center for BLOCK-HOUSE production: Hundegger K2i, year of manufacture 2011. Almost like new. Manufactured in 2015. Undertable cross-cut saw with blade size from 750 mm to 800 mm, 360° rotation, servo-hydraulic tilt 0–65° Universal 5-axis unit equipped with round cutter, end mill, and end milling cutter. Cutter head diameter: 350 mm x 100 mm end mill Combination mounting for at least 5 tools with horizontal boring unit, up to 2.5–3.0 kW power, maximum boring diameter 24 mm, minimum boring length 460 mm, minimum machining depth 300 mm Combination mounting for at least 5 tools with horizontal boring unit, up to 2.5–3.0 kW power, maximum boring diameter 24 mm, minimum boring length 460 mm, minimum machining depth 300 mm Positioning and clamping of the workpiece via gripper arms. As the workpiece is measured and transported to the desired position, the gripper arms hold the workpiece as close as possible to the tool for stabilization. The machined material can be rotated automatically. Cgjdsxtxkxopfx Agqjw Tolerance +/- 2 mm for lengths up to 13 m Fully automatic timber feed with feed roller conveyor, feed and sliding cross conveyor K2i: Undertable tilting cross-cut saw K2i: Universal milling unit – 4-axis (UF4) K2i: Combination support device for vertically operating tools K2i: Boring unit (2.2 kW) – vertical drilling direction K2i: Combination support device for horizontally operating tools K2i: Boring unit (2.2 kW) – horizontal drilling direction K2i: Marking tool (rear or user side) K2i: Fully automatic hydraulic panel rotation K2i: Transport and positioning system “two-hand system” K2i: Electrical connection K2i: Roller conveyor for removing wood elements with pusher K2i: 5-arm storage table K2i: Safety device K2i: High-quality machine surface K2i: Extension of K2i frame to 13.56 m K2i: 5-axis universal milling unit – UF5 (upgrade to 4 axes) K2i: Remote maintenance (incl. portable video camera) K2i: Dovetail milling machine (with rotating knives) 60x28x16.5 Ideal for timber construction! Available immediately.