Kabelske škarje

unbekannt hydraulisch

Stanje: rabljeno, Decoiler for wire tilted hydraulically: yes for wire coils up to 2 t year of manufacture: unknown complete with hydraulics +++++ Please note that the machine is in a disassembled and ready-to-load condition. For this reason, testing under power or producing a video demonstration is not possible. Podpfxjh Tafxe Agpjrd Furthermore, our listing contains the most representative photos of the best possible quality. Unfortunately, sending additional images is not possible. +++++

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, vrsta vhodnega toka: trifazni, skupna višina: 3.000 mm, skupna širina: 2.400 mm, skupna dolžina: 6.000 mm, poraba energije: 35 kWh, Oprema: dokumentacija / priročnik, Vacuum Evaporator – 57,000 L/Day | Industrial Wastewater and Process Water Treatment General Description The offered vacuum evaporator (57,000 L/day) originates from a project aimed at the treatment of process water and fermentation residues within a biogas producer consortium in southern France. The system was installed completely but never taken into operation. It remains in an as-new, factory-preserved condition and is immediately available. The evaporator is designed as a thermally efficient vacuum system, serving for volume reduction, concentration, and recovery of water-containing liquid waste. In combination with downstream reverse osmosis, it is ideally suited for applications requiring both clean distillate and highly concentrated nutrient or salt solutions. Technical Data (Evaporator 57 000) Type Vacuum evaporator, thermally heated Manufacturer Blue Water Plant Year of manufacture 2020 Capacity 57,000 L/day (approx. 2,400 L/h) Operating pressure < 0.2 bar (vacuum operation) Heating medium Hot water / steam Material construction Stainless steel AISI 316 / 304 Control system Siemens S7-1200 PLC with touch panel Energy consumption approx. 45–55 kWh/m³ (depending on raw water) Condition As new, factory preserved, unused Applications Biogas and digestate treatment – Recovery of nitrogen concentrates Landfill leachate treatment – Reduction of wastewater volumes Predpfxjwnbxds Agpsd Chemical & pharmaceutical industry – Process water treatment Food industry – Cleaning and reuse of rinse and process water ZLD systems (Zero Liquid Discharge) – Final stage for concentrate evaporation Advantages High thermal efficiency due to vacuum operation Robust stainless steel construction (AISI 316) for aggressive media Fully automatic control (Siemens S7 + Touch HMI) Low maintenance, durable components Ideal combination with RO systems (double pass integration) Immediately available – refurbishment, acceptance & 1-year warranty on request Special features System was part of a combined setup with SIMPEC RO 8000 44 8 No operational use, fully documented and preserved Location: Southern France (disassembly & transport can be organized by RIEFILT GmbH) Price & Scope of Supply Price: on request Scope of supply: Evaporator 57 000 + control system + documentation Optional: Refurbishment / Factory acceptance / 1-year warranty RIEFILT GmbH – Industrial Water Solutions

Stanje: dober (rabljeno), Profile bending machine, bending machine, flat bar bender, horizontal bending/straightening press - Bending/straightening press: hydraulic profile bending machine - Base frame: heavy-duty design, mobile - Hydraulic unit: unfortunately no type designation - Piston rod: Ø 55 mm / stroke: 200 mm Pedpfx Aet Hmhlegperd - Individual components: see photos - Overall dimensions: 1180/1060/H1000 mm - Weight: 445 kg

Stanje: dober (rabljeno), Grinding wheel puller, cup wheel puller, double bench grinder puller, surface grinding machine puller, cylindrical grinding machine puller, dresser head, truing head for grinding machines, grinding wheel dresser, radius dresser, disc puller Podjwv N Icepfx Agpjrd -Puller: Grinding wheel puller with hydraulic feed -Dresser head: without diamond tip, see photos -Dimensions: 350/70/H235 mm -Weight: 12.6 kg

Stanje: novo, Leto izdelave: 2023, Highly Efficient Series Production Clamping – Enter cutting dimension – Start. Automatic saws with feed are standard in efficient serial processing of bar and bundle materials. Maximum cutting range up to 290 x 320 mm. Equipment Automatic hydraulic sawing machine with NC control designed for cuts from 0° to 60° right, compliant with all CE safety standards Pedpfx Aefww Sqogpord The unit features 9 programs, each consisting of up to 99 individual steps, with a total of approximately 890 cutting positions and corresponding piece counter Function: Material feed, closing of fixed vice, blade rotation, distribution of emulsifiable fluid, bow descent until completion of the cut and return of the feed carriage to the set position, bow return and blade rotation stop via coolant distribution, cycle repetition Hydraulic feed, cut by cut, without length limitation Numeric control of quantity and cut length Hydraulic control unit with adjustable cutting pressure Blade tension is monitored electro-mechanically via microswitch. Device with brush for band cleaning Bimetallic band 3200 x 27 x 0.9 mm Kerf 1.2 mm Material feed stroke 600 mm Hydraulic power unit motor 0.75 kW Electric pump 0.09 kW for band cooling You are welcome to inspect the desired system at any time in our production/demo hall. Do not hesitate to contact us for more information. Plantec Maschinen GmbH

Stanje: dober (rabljeno), Lifting rod, lifting gearbox, lifting drive, lifting linkage -Lifting rod: Hydraulic lifting rod -Type: Unfortunately no type designation -Part no.: 831/65 U10-2.8 -Dimensions: see photos -Size: 1070/210/H130 mm -Weight: 12.7 kg Predswah Icepfx Agpsd

Stanje: rabljeno, Profile bending machine, bending machine, flat bar bender, horizontal bending/straightening press - Flat bar bender: hydraulic profile bending machine - Base frame: on castors, table foldable on both sides Pjdoh Tk Daspfx Agpjrd - Mode of operation: manual and automatic modes - Accessories: see photos - Overall dimensions: 2155/1320/H1070 mm - Transport dimensions: 1320/840/H1245 mm - Weight: 404 kg

Leto izdelave: 2023, Stanje: novo, Hooklift Jaw Crusher SEBA HL 70-40 Machine ready for immediate use, easy to operate, fully remote-controlled. Simple to transport with maximum productivity, switching from transport to working position in just 5 minutes. Weight: 11,900 kg Transport length: 5,700 mm Working length: 8,600 mm Width: 2,250 mm Height: 2,260 mm Doosan diesel engine: 54 kW Conveyor belt speed: 1.85 m/s Feed hopper capacity: 2.5 m³ Prsdpfsgnc S Tsx Agpsd Throughput capacity: 10–45 m³/h Crusher opening: 700 × 400 mm Hydraulic crusher gap adjustment: 20–100 mm Vibrating chute with pre-screening MACHINE FEATURES * Remote control for all movements * Level sensor at crusher inlet * Reversible discharge belt for pre-screening * Magnetic separator belt * Dust suppression system * Video monitoring for crusher inlet

Stanje: dober (rabljeno), Splitting wedge, separating wedge, crimping tool, hydraulic compression tool, cable shears, cable cutter - Cable shears: splitting wedge, separating wedge, hydraulic - Intermediate dimension: 95 mm - Wedge length: 100 mm Podpfevvagdsx Agpsrd - Quantity: 3x wedge tools available - Price: per piece - Dimensions: 550/100/H175 mm - Weight: 13.5 kg/piece.

Stanje: rabljeno, Leto izdelave: 1964, guillotine shear, sheet metal shear, plate shear, hydraulic shear, hydraulic shears - Guillotine shear: hydraulic Prjdpjhr Exijfx Agpod - Cutting width: 2580 mm - Max. cutting thickness: Steel 2 mm / Aluminium 3 mm - Space requirement: 3020 x 2000 x H1320 mm - Transport dimensions: 3020 x 2000 x 1320 mm - Weight: 3185 kg

Stanje: zelo dobro (rabljeno), Offered is a used solids pump / dirty water pump. SDAG Wismut-Aue. Pjdjhwnfcjpfx Agperd For further details, please refer to the photos.

Stanje: dober (rabljeno), Splitting wedge, separating wedge, crimping tool, hydraulic crimping pliers Prodpfx Agovvafyopjd - Crimping tool: splitting wedge/separating wedge, hydraulic - Intermediate dimension: 67 mm - Insertion width: 70 mm - Quantity: 2x wedge tools available - Price: per piece - Dimensions: 410/130/H62 mm - Weight: 6.5 kg each

Stanje: dober (rabljeno), Cable cutter, separating wedge, crimping pliers, hydraulic compression pliers - Splitting wedge: separating wedge, hydraulic - Intermediate dimension: 65 mm Prsdpfxevvagko Agpod - Insertion depth: 40 mm - Dimensions: 565/154/H105 mm - Weight: 20.1 kg

Stanje: rabljeno, Leto izdelave: 1988, Razdalja med konicama: 1200 mm Hitrost A) 70 - 380 min⁻¹ Hitrost B) 380 - 2000 min⁻¹ Teža: 2,2 t Stružnica za les +++++ Prosimo, upoštevajte, da je stroj demontiran in pripravljen za nakladanje. Zaradi tega demonstracija pod napetostjo ali izdelava videoposnetka nista mogoča. Poleg tega naš oglas vsebuje najbolj informativne fotografije najvišje možne kakovosti. Pošiljanje dodatnih slik žal ni mogoče. +++++ Podpek Sat Dofx Agpord