Dvodelna valjčna proga

unbekannt 6255/540/H750 mm

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: A2536805, Pressure: 40 t Stroke: 250 mm Gtjdpfx Adjfxyhfexst Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. rapid approach speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table cut-out: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom-built for you. Production lead time is approx. 5 months after receipt of payment. Rapid approach: The press moves at up to 90 mm/sec to the zero point. Positioning accuracy is 0.5 mm or better. Return: The press returns to the end point at up to 90 mm/sec. Accuracy is 0.5 mm or better. The dwell time can be adjusted from 0 to 10 seconds (in 0.1 sec increments). Pressing force is adjustable in bars, corresponding to 10 to 40 tons. Further details on the control system: Operation can be locked via a key switch. The control key switch provides the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stop at any desired position by releasing the switches.) - Manual operation for bending at up to 9.5 mm/sec via two-hand control, with automatic return to TDC upon releasing both buttons. - Automatic operation with safe tools at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine is strictly intended for use with enclosed, safe tools only. This warning is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. The key-operated selector switch allows switching between automatic and manual operation. Position adjustment for TDC and BDC, and the shift point for speed reduction, are managed by sensors adjustable on a chrome-plated rod. The sensor can be finely adjusted with a locking thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and operated via two-hand control for sheet metal bending. In automatic mode with safe tools, it can punch, notch, and bend.

Stanje: rabljeno, Širina materiala: 300 mm Teža koluta: 3 t Debelina materiala: 2 - 4 mm Ravnalko, 7 valjev, proizvajalec Schleicher, tip RM 6-95/160 Širina traku: 300 mm Debelina traku: 2 - 4 mm Ravnalni presek: 1200 mm² Napetost: 220/380 V 50 Hz Moč: 3,1 kW Razvijalec s pritiskalnim valjem, proizvajalec Schleicher, tip H-3 Maksimalna obremenitev: 3 t Širina traku: 400 mm Napetost: 220/380 V 50 Hz Moč: 3,92 kW Gtedpfx Ascdrmmsdxot Brez krmiljenja

Stanje: novo, barva: rumena, skupna masa: 2.000 kg, lastna masa: 2.000 kg, stanje pnevmatik: 100 odstotek, stanje pogona: 100 odstotek, stanje verige: 100 odstotek, Leto izdelave: 2024, GG2000 CAB Gunter Grossmann & Yanmar Gtjdpeqv E S Rsfx Adxst Tracked Excavator Günter Grossmann GG2000 CAB. Mini crawler excavator GG2000 CAB, equipped with a Japanese KUBOTA engine, KDK hydraulic pump, and USA EATON travel motor. Excellent quality. (Excl. VAT) Includes: Excavator GG2000 CAB + Narrow bucket 400mm + Narrow bucket 400mm + Grading bucket 1000mm + SPECIFICATIONS Model: GG2000 CAB Bucket capacity: 0.045 m³ / 200 kg Bucket widths: 250 mm, 400 mm, 600 mm, 1000 mm Engine: Japanese Yanmar Rated power: 27 HP Displacement: 1.53 L Engine: three-cylinder, water-cooled Main pump: Teife Valve: Teife Swing motor: USA Eaton Travel motor: USA Eaton Max. digging depth: 2150 mm Max. vertical digging depth: 1740 mm Max. digging height: 3275 mm Overall dimensions (LxWxH): 3800 x 1050 x 2170 mm Total track length: 1620 mm Ground clearance (upper chassis): 460 mm Swing radius: 360° DIMENSIONS Overall dimensions (LxWxH): 3800 x 1050 x 2170 mm Total track length: 1620 mm Ground clearance (upper chassis): 460 mm Swing radius: 360° WORKING RANGE Max. digging depth: 2150 mm Max. vertical digging depth: 1740 mm Max. digging height: 3275 mm

Stanje: dober (rabljeno), dimensions (l x w x h) approx.: 3550 x 2400 x 2300 mm Weight approx. 7000 kg Coil weight: 6000 kg Coil width: 1250 mm Max. coil diameter: 2500 mm Gsdpfx Ashhyzcjdxstt Coil inner diameter: 480–510 mm Without control cabinet!

Leto izdelave: 2015, Stanje: rabljeno, Prodaja proizvodne linije za W in C profile Namenjena je proizvodnji cestnih ograj, stebričkov in pritrditvenih elementov. Popolnoma opremljena linija, primerna za neprekinjeno industrijsko proizvodnjo. Linijo sestavljajo: • Dva odvijalca • Linija za izdelavo stebričkov • Linija za izdelavo parapetov • Dva stiskalnika za izdelavo pritrditvenih elementov Tehnične specifikacije: • Dolžina: 17 m • Širina: 1 m • Višina: 1 m • Moč motorja: 22 kW • Teža: 18 t • Leto izdelave: 2015 • Proizvajalec: Chengxing Machinery (Kitajska) Namen in prednosti: Ta proizvodna linija za W in C profile je primerna za proizvodnjo različnih varnostnih elementov za ceste: zaščitnih ograj, podpornih stebrov in pritrditvenih delov. Oprema zagotavlja zanesljiv, stabilen in dosleden proizvodni proces. Gtedpsxhf R Iefx Adxst Naprava je pripravljena za ogled. Za več informacij smo vam na voljo.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Viesmann Vitoplex 100 LS with Weishaupt WM - G10/4A Godetrl Skopfx Adxott

Stanje: rabljeno, Technical Details: Sheet width: 800 mm Coil weight: 12 t Max. sheet width: 800 mm Min. sheet width: 300 mm Strip thickness: max. 5.0 mm Strip speed: 4.5 / 25 m/min Working height: 1700 mm Load capacity: 12.0 t (Coil) Approx. machine weight: 7.3 + 6.62 t Decoiler dimensions: 3.2 x 1.9 x 2.7 m Gtjdpfju Ic Avox Adxot Approx. machine dimensions LxWxH: 2.5 x 2.6 x 2.45 m Decoiler with loading device and straightening machine Coil Decoiler UR 80.5: Max. outer Ø 1,500 mm Max. strip width 800 mm Max. load capacity 12 t Expansion Ø 470 - 630 / 570 - 730 mm (spread) Traversable transport unit LxWxH: 1700 x 1500 x 1000 mm; transverse movement, with prism support 1000 x 1000 mm Straightening machine UAH 80: Min. strip width 300 mm, max. 800 mm Max. strip thickness 5 mm 2 x feed rollers Ø 144 x 850 mm, adjustable 3 x lower straightening rollers Ø 100 x 850 mm, fixed 3 x upper straightening rollers Ø 110 x 850 mm, adjustable 30 mm Recommendation: Complete strip processing line (decoiler with loading device and straightening machine + straightening machine with hydraulic feeder) optionally available for sale together with stock no. 0100571.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Expanding Mandrel Decoiler Type: AE-050 Strip width: 400 - 1,500 mm Strip thickness: 0.5 - 3 mm Coil weight: 20 t Coil outer Ø: max. 1,800 mm Gedpfx Adsupg Scsxott Mandrel Ø: 508 mm Year of manufacture: 2009

Stanje: dober (rabljeno), Leto izdelave: 2000, Weinig High Mech E6 vnos + A5 iznos + zlagalnik 1. Weinig valjčni transportni trak za dovod paketov. 2. Weinig nagibni sistem za pakete. 3. Weinig prečni transportni trak z ravno verigo in enojnim podajalnikom desk. 4. Weinig sortirna enota za izločanje z valjčnimi tirnicami. Godpfx Aewgbw Rodxott 5. Weinig EM814 dovedna enota za skobeljni stroj z ravno verigo za podajanje. 6. Weinig izhodni pasovni pospeševalni transporter, dolžine 3 m. 7. Valjčni transportni trak s prečnimi potisniki na verigi. 8. Weinig prečni pasovni transportni trak z zalogovnikom. 9. Weinig zlagalnik z ravno verigo in dvižno škarjasto valjčno progo. 10. Weinig izhodni valjčni transportni trakovi za pakete. Možna dodatna ponudba z dodatnim Weinig vezalnim sistemom po potrebi.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, nosilnost: 4.500 kg, dvižna višina: 7.550 mm, vrsta goriva: električni, tip droga: triplex, dolžina vilic: 1.200 mm, barva: rumena, gorivo: elektrika, Oprema: kabina, Brand: Combilift Model: MR4 Year of manufacture: 2024 Capacity: 4,500 kg Lift height: 7,550 mm Gsdpfx Ast Hflijdxjtt Mast type: Triplex