Križna miza z nameščeno vrtljivo mizo in pogonom s koračnim motorjem; vrtljiva miza, delilna glava,

UHL B 80-DT/ KT5-NSOC

Stanje: rabljeno, Tube bending machine, mandrel bending machine, bending machine for tubes and profiles Tube bending unit with SIEMENS servo motor and planetary gear Year of manufacture: 2003 Bending capacity: max. Ø 20 x 1 mm Bending radius: max. R 70 mm Gbedjd E A I Ijpfx Afqjg Bending angle: max. 200° - Last used for round tube Ø 15.4 x 0.8 mm, R 60 mm - Bending tools and bending dies are interchangeable - Drive of the bending tool via AC servo motor and Alpha helical gear, planetary gear - 2-piece bending tool opens and closes via hydraulic lifting movement - MERKLE hydraulic round block cylinder, type 014445 for hydraulic tool opening - Pneumatic height adjustment of the bending die via Festo pneumatic cylinder - Without electrical control system - Without hydraulic power unit Dimensions (L/W/H): 760 x 400 x 150 mm Weight: approx. 60 kg Good condition Dismantled from a fully functional special-purpose machine, tested before removal. Drive: Brushless permanent magnet servo motor SIEMENS Type: 1FK6061-7AF71-1EG0 Rated torque = MO: 6.4 Nm Rated current = Io: 6.1 A Max. speed = n. max.: 5,500 rpm - Brushless permanent magnet servo motor SIEMENS ----- 5 units in right-hand version available. 5 units in left-hand version available. The stated price refers to one bending unit with servo motor. Upon request, we also sell individual subassemblies of the bending unit. We also offer electrical components for servo motor control. Hydraulic power units are also available.

Leto izdelave: 1994, Stanje: dober (rabljeno), Rivo bandsaw sharpening machine Gbodpfxepl D Hxe Afqog Model GA 250

Leto izdelave: 1990, Stanje: dober (rabljeno), Used side loader Kalmar, The machine has been well maintained. For further details, please refer to the pictures. Gbsdpfsh Et E Nex Afqog

Stanje: rabljeno, Leto izdelave: 2001, Wood processing dimensions: Infeed lengths min/max: 500 - 6500 mm Full optimization up to max: 1500 mm Infeed widths min/max: 40 - 300 mm Infeed thicknesses min/max: 15 - 120 mm Max. wood cross-sections: 300 x 40 mm or 200 x 120 mm Fixed lengths after saw min: 510 – 2800 mm Special application: Cutting blocks, min/max length: 100 – 200 mm (Note: Multiple block lengths during sorting; blocks are conveyed to the end of the sorting line and fall into customer-supplied mesh boxes) Cutting/trim tolerance: +/- 0.8 – 1.5 mm (depending on timber quality with minimal resin content and uniform surface. Tolerance up to 1 m fixed length; maximum tolerance for longer parts up to 2.5 m). Thickness tolerance: +/- 3 mm Wood curvature in all directions: max. 10 mm per meter length Wood species: Softwood or hardwood System performance: Feed speed, steplessly adjustable up to max. 230 m/min Cutting cycle: 0.6 – 1 s To determine actual daily output, an efficiency factor dependent on the customer’s production conditions must be applied. Working height infeed and saw: 900 mm (to be placed on customer-side platform; saw requires concrete base) Sorting working height: 2000 mm Connection data: Total electrical connection load: approx. 18 kW Operating voltage: 380 Volt / 50 Hz Voltage fluctuations max. 5 % Air consumption: approx. 1200 NL/min Operating pressure: approx. 8 bar Extraction speed: approx. 30 m/s Paint finish: pebble grey RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge Pos. 2: Support roller without drive, front-facing sheets table for easier loading Gsdew Sy T Hjpfx Afqsbg Pos. 3: Length measuring station with built-in fluorescence camera to detect error markings Pos. 4: Automatic, contactless width measurement Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version with integrated waste chute, incl. equipment package for large wood cross-sections Graphic-capable input terminal (16 x 40 characters, numeric keypad) with software package for optimization and system control Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Pos. 6: Outfeed conveyor belt as sorting station with drive unit, length 7500 mm Pos. 7: 2 ejectors mounted on outfeed conveyor Location: Nattheim

Stanje: rabljeno, Swing diameter / mm Turning length / mm Swing diameter over cross slide / mm Technical Data – Model 230 DIMENSIONS Centre height over bed: 230 mm Distance between centers: 1000-1500 mm 2000-2500 mm 3000 mm Bed width: 360 mm Max. turning diameter: over bed: 465 mm over cross slide: 278 mm over fixed steady rest: 200 mm over travelling steady rest: 160 mm SWING OVER GAP Gap width: 300 mm Distance between faceplate edge and gap: 150 mm Max. turning diameter in gap: 690 mm SPINDLE Front bearing diameter (internal): 110 mm Rear bearing diameter (internal): 95 mm Spindle bore diameter: 77 mm Mounting type - Cam Lock: 6" Spindle taper (internal) – taper: 1 : 20 Spindle nose taper – Morse: 5 Spindle speed ranges: Low – rpm: 15÷1000 Standard – rpm: 22÷1500 High – rpm: 30÷2000 FEEDS (without gear change)-No.: 108 Longitudinal feed range per rev.: 0.04÷4 mm Cross feed range per rev.: 0.02÷2 mm Leadscrew diameter: 40 mm Leadscrew pitch: 12 mm THREADS (without gear change) Metric – No. 54 from: 0.5÷28 mm Module – No. 54 module: 0.25÷14 Whitworth – No. 54 tpi x 1": 56÷1 Diametral Pitch – No. 54 D.P.: 112÷2 Inch (imperial) – No. 54 from: 1/32 ÷ 13 3/4" TAILSTOCK Quill diameter: 75 mm Quill stroke: 220 mm Quill taper – Morse No.: 5 POWER Main motor – HP: 10 Pump motor – HP: 0.25 Gbsdpfowz Rywjx Afqog WEIGHT approx. 2920kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: R14101358 (Roboter) / E14130752 (Steuerschrank), skupna masa: 1.270 kg, nosilnost: 250 kg, doseg roke: 2.655 mm, proizvajalec krmilnikov: FANUC, model krmilnika: R-30iB, vhodna napetost: 400 V, FANUC industrial robot R-2000iB 250F, Year of manufacture: 01.2014 (control cabinet 12.2013). Axes: 6, Reach: 2,655 mm, Payload: 250 kg. Dimensions: Length 200 cm, Width 110 cm, Height 185 cm. Gbsdpfetk N E Tjx Afqsg Control cabinet: FANUC R-30iB. Complete with robot arm, connection cables, teach pendant, and controller. (For further details, see nameplates). IPendant A05B-2255-C101#EGN We also offer accessories such as pedestals, spot welding guns, rotary tables, and much more. We are happy to demonstrate the robot for you. Packaging and loading included.

Stanje: pripravljen za uporabo (rabljen), Strung frontal DP 2000 Diametru mandrinei: 2000 mm Lungime: 3500 mm Greutate: aprox. 22 t Gsdpfx Afsv Hx R Neqjbg

Stanje: novo, Leto izdelave: 2026, Učinkovito nanašanje lepila v pohištveni industriji v izvrtine za ključe in utore na hrbtiščih, prav tako lepljenje pri okvirni, okenski in vratni proizvodnji v izvrtine za ključe, utorne in čepaste spoje. Gedpfjhnddzox Afqebg Kratek opis: • Univerzalna naprava za nanos lepila • Prihranek časa – enostavno – čisto • Različne šobe in nastavki • Mobilna naprava Univerzalno področje uporabe: • Lepljenje izvrtin za ključe • Lepljenje utorov za hrbtišča • Lepljenje robnih površin • Lepljenje površin na splošno • Lepljenje utornih in čepastih spojev • Lepljenje delov pri omarah, korpusih, predalih • Lepljenje delov pri okvirjih • Lepljenje delov pri oknih in vratih • Predelava ploščatih in masivnih lesenih komponent

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, Premer vrtenja nad posteljo: 400 mm Premer vrtenja nad prečnim saneh: 220 mm Razdalja med konicama: 1500 mm Premer vretena: 50 mm Hitrost vrtenja: 12,5 – 3150 obr/min Moč: 5,5 kW Potrebna moč: 16 kVA Mere (D x Š x V): 2900 x 1000 x 2200 mm Teža: cca 1600 kg Oprema, dodatki - 3-čeljustna vpenjalna glava, D200 mm - 4-kratni držalo orodja - Luneta - Prikazovalnik obremenitve motorja - Hitri pomiki - Pogonski sistem s sklopko - Vretenasta zavora - Zadnja zavesa proti brizganju - Kaljeno in brušene vodilne tirnice v odličnem stanju - Fiksna luneta Gsdpfxsxiymts Afqjbg - Hladilni sistem - Dokumentacija Stroj je bil malo uporabljen in je v odličnem stanju. Sistem za merjenje pomika ni vgrajen.

Leto izdelave: 2021, Stanje: novo, Cantilever racking, double-sided, 4.16m height, 1.20m arms, 750kg per arm – NEW: Price ex works, loading included! 1 racking unit with 4 uprights: €3,420 (net)! Transport price within Germany (excluding islands): €550 (net)! You can also build longer or shorter racking units by omitting or purchasing additional frames (or by changing the bay spacing); this example with 4 frames is simply the standard racking solution! A cantilever racking system, hot-dip galvanized, consisting of: 4 double-sided uprights approx. 4.16 m high, hot-dip galvanized IPE 160 / 100 profile with 2x3 adjustable arms of 1.20 m length per upright, 750kg load capacity per arm with bracing approx. 1.30 m Double-sided uprights approx. 4160 mm high, hot-dip galvanized Base and arm depth 1200 mm, with 3 height-adjustable arms per side Load capacity at load center 600 mm: 750kg per arm / 2,250kg per upright side With horizontal and diagonal bracing, bay spacing e = 1300 mm; standard is 1.30m Gsdpsfivhfefx Afqsbg Other standard bay lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! From a length of 1.50m an additional surcharge applies to the listed price! Special measurements (other bay spacings) are available upon request, incurring a surcharge and longer delivery time as they need to be custom manufactured! If no different bay spacing is specified, we supply the racking with a bay spacing of 1.30m. In this case, the length of a rack row with 4 uprights (3 bays) is approx. 4m. Delivered with all bolts and nuts (shipped within Germany directly by Würth), without floor anchors. Other configurations (upright height, arm lengths, arm types etc.) available! Please contact us!