Parna turbina

Turboden 10HR Split ORC Turbogenerator

Stanje: dober (rabljeno), Leto izdelave: 1996, KRÜSI Chalet Construction Machine / Log House Production Line Type CM 40 Manufacturer: Krüsi Maschinenbau AG, CH-9105 Schönengrund AR Year of manufacture: 1996 Condition: Good, technically inspected and cleaned / ready for operation Operating Principle Processing of construction timber for chalet construction / log house manufacturing The beams can be processed in a single pass • Cutting to length • Horizontal and vertical milling of tenons / grooves in a single clamping • Drilling • Milling of end grooves Workpiece: • Max. cutting height: 200 mm • Max. cutting width: 250 mm Robust welded construction design. Machine (horizontal and vertical milling unit) with 4 special milling motors, equipped with hardened and ground guides for maximum machining precision. Carriage guided by dust-protected and preloaded ball bearing rollers. Working area up to 200 x 250 mm. Fully operational, with contactor control, motors protected by thermal relays. Electrical equipment for 380 V, 50 Hz, with protective covers, central connection for on-site chip extraction, with 2 eccentric clamps, without milling tools (rebate heads). With hydro-pneumatic horizontal and vertical feed, electrically controlled, operating together with spindle motor start-up. Rapid traverse and feed are steplessly adjustable. Fully wired and installed, including air maintenance unit. Beams with a thickness of more than 14 cm must be processed in two clamping steps. Such beams must be repositioned for re-milling to account for the excess thickness. Safety covers over moving parts with gas strut weight compensation. Machine Description / Equipped with: 1. Saw Unit: Manual feed Spindle adjustment with analog scale display Saw blade Ø max. / Bore Ø: 400 / 30 mm Tungsten carbide tipped with chip depth limiter (same direction of rotation) Adjustable riving knife Motor speed: min⁻¹ 2900 Power kW: 2.2 2. CM Milling Unit (Log House Unit) Hydro-pneumatic feed Spindle adjustment with digital scale display Horizontal milling unit Cutter Ø: 180 mm Max. cutter width: 130 mm For cutter widths above 60 mm, only cutters made from aluminum alloy with indexable inserts are to be used Nwjdpsu Uh T Dsfx Adpop 2 motors, hydro-pneumatic feed, each 2.2 kW Hydro-pneumatic feed Rapid traverse and feed speed steplessly adjustable 3. Drilling Unit: Manual feed Spindle adjustment with analog scale display Drill holder: Collet ER 25 Clamping Ø max.: 16 mm Drill Ø max.: 32 mm Motor: min⁻¹ 1450, 1.8 kW 4. End Milling Unit Hydro-pneumatic feed Spindle adjustment with digital scale display Max. cutter Ø: 230 mm Max. cutter width: 60 mm Motor: min⁻¹ 2900, 3.0 kW 2 V-belts SPZ 9.5x1000 La Pneumatics On-site operating pressure min/max. MPa (bar): 0.7 / 1 (7 / 10) Air consumption Nm³/h: 8 Electrics Operating voltage V / Hz: 380, 50 Rated power kW: 8.8 - 15.8, depending on configuration Required on-site fuse: A 3 x 25 slow-blow Maximum simultaneous power in use: 4.4 kW Dimensions Machine width: 2400 mm Machine depth: 1600 mm Overall height (guard down): 1600 mm Overall height (guard up): 2200 mm Extraction connection Ø (floor extraction): Weight approx.: 1300 kg Incl. roller conveyor 2 x 6 m (2 x 4 m) Technical specifications subject to change!

Stanje: novo, Leto izdelave: 2023, For sale due to planning error: a brand-new, original-packaged cantilever arm discharge unit for a Fröhling heating system, suitable for a 6 m storage room, including a 1 m auger extension. Features separate drives for auger and rotary plate (two motors), making it ideal for dual boiler systems. The photo is from a different installation, as my unit is still in its original packaging. Nwedsuq Iy Rspfx Adpsp

Stanje: skoraj kot novo (rabljeno), WEINIG Hydromat H30N, S/N 253-886, Year 1991, 9 spindles Hydromat H30 with short infeed table and heavy-duty 6-roller feed system • Maximum working width: 300 mm • Maximum working height: 140 mm • Electronic variable feed, infinitely adjustable 12 – 120 m/min • Feed motor: 22.0 kW • 1st spindle bottom: 11.0 kW • 2nd spindle right: 11.0 kW • 3rd spindle left: 15.0 kW Nwedpfx Ajtynpxsdpsp • 4th spindle left: 11.0 kW • 5th spindle right: 11.0 kW • 6th spindle top: 22.0 kW • 7th spindle bottom: 30.0 kW • 8th spindle top: 11.0 kW • 9th spindle bottom: 11.0 kW • All spindle motors equipped with electronic brakes • COMPLETE NEW CUTTERHEAD SPINDLES • Spindle diameter ø 50 mm • Spindle speed 6,000 rpm • 6 driven table rollers – hard-chromed • Spindles 1, 6, 7, 8, 9 fitted with NEW counter-bearings • Hydraulic counter-bearing clamping • Spindles 2, 3, 8, 9 with jointer • Spindles 4, 6 with pneumatic pressure mechanism • NEW feed rollers D=170 mm • Hard-chromed table plates • Hard-chromed fences • Heavy-duty pneumatic top pressure rollers • Heavy-duty pneumatic side pressure rollers • Automatic table lubrication – NEW • Centralized lubrication points • NEW free-standing control panel, 5 m cable • NEW free-standing control cabinet, 5 m cable • Operating manual, spare parts list, and circuit diagram + Many NEW spare and accessory parts included. Dimensions: • Total length approx. 6,150 mm • Total width approx. 2,160 mm • Machine weight approx. 9,500 kg Electrical connection: • Total connected load approx. 157 kW Condition: Machine as seen in the photos – technically as new Payment: Strictly net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: Possible at any time by appointment Offers & inquiries only with full company details Subject to prior sale and errors.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Prodajajo se delujoči PLINSKI GORILNIKI G70, 7000 kW, s krmilno omaro in krmilno enoto, plinska pot DUNGS DN 80. WEISHAUPT Tip: G70/1-B Izvedba: ZM-LN Moč: 700-7000 kW Leto izdelave: 2011 - Dostava je možna na željo - Vse tehnične podatke si lahko ogledate na slikah Prednost ima prodaja trgovcem, podjetjem ali za izvoz. Vsi podatki brez jamstva, pridržujemo si pravico do napak in predhodne prodaje. Prodajalec ne prevzema odgovornosti za tipkarske ali prenosne napake. Nedpfx Adeign Iwepjwp

Stanje: rabljeno, skupna masa: 24.000 kg, premer rotorja: 640 mm, število rezil: 114, dolžina rotorja: 2.500 mm, moč: 247 kW (335,83 KM), No. 10023 Single-Shaft Shredder Vecoplan VAZ 2500 Used, year of manufacture approx. 2006 Fully overhauled in 2022 Approx. 700 operating hours since overhaul Areas of application: waste wood, scrap wood, packaging materials, film, plastic, paper, textiles, municipal waste, commercial waste, bulk production waste, baled production waste 247 kW Rotor length: 2500 mm Rotor diameter: 640 mm 114 pieces of 60x60 mm square knives, 4 rows Shredding size selectable from approx. 10 – 250 mm Screen basket: 50 mm Throughput capacity: up to 25 tonnes per hour / throughput for waste wood approx. 30 tonnes per hour Material feed via hydraulic pusher Nodpfx Aewh T N Uedpowp Scope of delivery: machine, hopper, control cabinet, cooler Mechanisation optionally available Transport dimensions (LxWxH) approx. 4750 x 4640 x 2340 mm Weight approx. 24,000 kg Sale on behalf of a customer, ex site near 85456 Wartenberg, without dismantling, transport or installation Errors in description and price excepted Dismantling, transport, and loading by us available as an option To avoid possible misunderstandings, on-site inspection by appointment is possible and recommended Sale as is Technical data, condition description, year of manufacture, and scope of delivery according to manufacturer’s brochure and/or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded; the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus legal VAT, payment before collection or shipment Delivery terms: ex site

Stanje: zelo dobro (rabljeno), Popolnoma avtomatska linija za proizvodnjo kolov ali stebrov: vstopni transportni trak, stopničasto podajalno napravo, verižni transporter, dvoglava stroj za zaokroževanje, ločilni modul, prečna krožna žaga za razrez na dolžino, enota za ošiljevanje in posnemanje robov. Možna izdelava kombinacije posnet/posnet rob ali hkratna obdelava dveh kolov — en s konico in posnetim robom, drugi s posnetimi robovi. Največji premer obdelovanca je 120 mm. Nsdpfx Adstyv S Iopjwp

Stanje: dober (rabljeno), Leto izdelave: 1998, War bis 2017 im Einsatz. Mit vollständiger Dokumentation. Ausgestattet mit einem Weishaupt G5/1-d ZMD Erdgasbrenner. Maximale Leistung beträgt 940 kW. Njdpfx Adsiqb A Ijpswp

Stanje: zelo dobro (rabljeno), Collapsible mesh box, load carrier Foldable Color: green Base: flat steel plate Nwjdpfxelcct Sj Adpep External dimensions: 1600x1200x1000 mm Weight: 150 kg

Stanje: pripravljen za uporabo (rabljen), EPAL board chamfering machine, brand CAPE, in working condition. Maximum length 2500mm. Nodpfxek Nf S Uo Adpewp

Stanje: rabljeno, Leto izdelave: 2001, Tip diameter: 1000 mm Root diameter: 50 mm Module – max.: 18 mm Module – min.: 1 mm Wheel diameter – max.: 1000 mm Wheel width: 630 mm Max. profile height: 41 mm Helix angle (left/right) max.: 45° Table diameter: 720 mm Nwodpfxewp S The Adpep Max. table load: 1500 kg Grinding wheel diameter min./max.: 180 / 400 mm Grinding wheel width: 60 (45/30) mm Grinding spindle speed: 0 – 3100 rpm Total connected load: 30 kVA