Horizontalni strojni center

TTGroup SH-5000P

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Centre height: 181 mm Centre distance: 1000 mm Max. grindable workpiece diameter: 360 mm Max. cantilever load: 1000 N (100 kg) Max. load between centres: 3000 N (300 kg) Z-axis: Table swivel angle: 10° Hydraulic table drive: 0-4 m/min X-axis: Cross slide travel: 80 mm Rapid traverse (hydraulic): 50 mm Coarse adjustment (air cushion): 280 mm Feed drive via DC motor Rapid feed speed: 48 mm/min/Ø Feed operation: Plunge grinding / longitudinal grinding 4 presettable feed rates mm/min/Ø: 0.01-48 4 presettable feed amounts mm: 0.001-0.1 Sparkout during form grinding: 0-99 s / 0-99 strokes Tip feed mm/Ø: 0.001 Grinding spindle head: Universal, swiveling 0-180° Grinding wheel (external): D x w x d mm: 500 x 100 x 127 or 203.2 Grinding wheel (face; option): D x w x d mm: 250 x 32 x 76.2 Grinding wheel (internal; option): D mm: (2-250) Drive power – external/face: 5.5 (7.5) kW Drive power – internal: 2.2 kW Peripheral speed – external: 35 (50) m/s Grinding wheel wear (external): 160 mm/Ø Guard width: 100 mm Grinding spindle diameter: 60 mm Internal spindle mounting: 80 (100) mm Workpiece spindle head: Infinitely variable drive: Mk 4, 1/min: 30-270 / 50-450 Workpiece spindle lockable Spindle mount: Mk 4/24 mm Spindle nose for flange mounting: Mk 4, cylindrical Ø63H6 x 6 mm Workpiece spindle head swivels on rotary part: 0-90° Tailstock: Quill mounting/quill diameter: Mk 4/750 mm Quill stroke: 45 mm Quill force: 100-800 N / 250-1400 N adjustable Quill operation: manual (foot switch) Fine quill adjustment: ±40 µm Connection values: Total machine connected load: 6.5-10 kW Itsdpfxjtqf Rze Ab Aog Grinding spindle head: 5.5 (7.5) kW Workpiece spindle head: 0.55 (1.1) kW Coolant filtration: 0.75–2.2 kW Lubrication pump for guideways: 0.1 kW Hydraulic pump: 1.5 kW Hydraulic reservoir: 80 L Pneumatic system: 6 bar Comparable to: Weiss / EMAG / GP cylindrical grinders / Studer / Kellenberger / Schaudt / Tschudin / Tacchella / Dannobat

Stanje: rabljeno, TECHNICAL DATA - Distance between centres: 200 mm - Centre height: 100 mm - Travel (X/Z): 130 / 170 mm GRINDING WHEEL HOLDER SPINDLE HEADSTOCK - Wheel dimensions: 400 x 63 x 127 mm - Peripheral speed: 45 m/sec - Power: 3 kW - Orientation: 30° WORKPIECE HOLDER SPINDLE HEADSTOCK - Taper: MT4 - Speeds: 600 - 3000 rpm - Power: 0.5 kW - C axis indexing accuracy: +/- 0.5° TAILSTOCK - Taper: MT2 - Quill stroke: 30 mm ELECTRICAL SUPPLY - Voltage: 400 V - Frequency: 50 Hz - Installed power: 19 kVA DIMENSIONS - Space requirement: 1760 x 2180 mm - Height: 2630 mm - Weight: 4,000 kg MACHINE HOURS - Hours under power: 46,943 h - Operating hours: 21,529 h ACCESSORIES - CNC FANUC 16TB - Options: Studer Release B, Pictogramming - Interface: RS232C Itsdpfxouhbxmo Ab Ajg - Electronic offset levers - Direct measuring systems on X and Z axes - Tailstock with fine concentricity adjustment - Hydraulic retraction of tailstock quill - Swivelling dressing wheel on table: FISCHER AES-72x230/3 - Grinding wheel dynamic balancing: DITTEL HBA 4000 - Diameter measuring device: MOVOMATIC ES400 - Loading/unloading robot system: FELSOMAT - Automatic front door - Coolant system - Electrostatic extraction: ELOSTA BF2000 - Pneumatic collet chuck - 1 grinding wheel holder - 1 grinding wheel - Support arm for zero-G grinding wheel change - 1 balancing shaft

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, obratovalne ure: 15.208 h, potovalna razdalja osi X: 730 mm, pomik osi Y: 730 mm, pomik po osi Z: 880 mm, skupna masa: 12.000 kg, največja hitrost vretena: 15.000 obr/min, moč vretenovega motorja: 21.000 W, število osi: 4, This 4-axis DMG MORI NHX 5000 was manufactured in 2017. It features a maximum spindle speed of 15,000 rpm and travel distances of 730 mm in the X and Y axes, with a Z-axis travel of 880 mm. The machine is equipped with a robust 500 x 500 mm pallet size and a tool capacity of 40 tools. If you are looking for high-quality machining capabilities, you should consider the DMG MORI NHX 5000 horizontal machining center that we have for sale. Contact us for further details. • Spindle torque: 111 Nm (continuous 85 Nm) • Tool holder: BT40 • Tool capacity: 40 tools (optional magazine for 60 tools) • Rapid traverse (X/Y/Z): 60 m/min • Acceleration (X/Y/Z): 1G • Pallet size: 500 x 500 mm • Number of pallets: 2 • Automatic rotary pallet changer: 2 stations • NC table B-axis: direct drive, indexing 0.001°, max. speed 100 rpm • Maximum pallet load: standard 500 kg (optional 700 kg) • Direct position measurement system; linear scale standard • Control: CELOS Siemens 840D sl with 21.5" ERGOline multitouch display • Electronic handwheel: Siemens • Coolant through spindle preparation up to 70 bar • Renishaw measuring probe OMP60 • Tool breakage detection system • Machine status signal lamp • Water-glycol spindle cooling • Application tuning cycle (ATC) • Machine bed: 3-point support • Power connection: L1 L2 L3 N PE • Connected load: 46 kVA • Maximum input current: 67 A • Circuit protection: 125 A Iodeyt Hwzepfx Ab Aotg • Short-circuit current: 1.25 kA • Maximum supply voltage: 4.0 kV • Supply voltage: 400 V ±10 % • Frequency: 50 Hz • Control voltage: AC 230 V / DC 24 V • Operating hours: 27,715 h • Spindle hours: 15,208 h Additional equipment • Knoll KF110/700 • Knoll flow monitor • High-pressure coolant system • 2x clamping towers (250 x 250 x 650 mm) TRIAG incl. accessories • 95x tool holders HSK63 (various clamping devices) Technical Specification Taper Size BT 40

Stanje: rabljeno, Leto izdelave: 1982, Tehnične podrobnosti: Premer brušenja: 350 mm Dolžina brušenja: 1000 mm Višina med konicami: 225 mm Maks. dolžina brušenja: 1600 mm Razdalja med konicami: 1540 mm Iodpfxew Rktzs Ab Aotg Vreteninska odprtina: 38 mm Maks. zasuk: 90° Teža stroja pribl.: 6,0 t Mere stroja pribl. D x Š x V: 4,4 x 2,45 x 2,3 mm Stroj s CNC paketom in DFU priključkom Večobmočna merilna glava za prekinjeno plaščasto površino Konjiček s korekcijo cilindrične napake Finibalanz uravnoteževalna naprava

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, obratovalne ure: 11.000 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 600 mm, pomik osi Y: 560 mm, pomik po osi Z: 565 mm, hitro pomikanje X-os: 40 m/min, hitri pomik os Y: 40 m/min, hitri pomik na osi Z: 40 m/min, skupna višina: 2.700 mm, skupna dolžina: 4.000 mm, skupna širina: 2.400 mm, širina mize: 400 mm, dolžina mize: 400 mm, največja hitrost vretena: 8.000 obr/min, delovne ure vretena: 6.383 h, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Na voljo je horizontalni obdelovalni center proizvajalca Doosan. Delovnih ur: 11.320 h Vretenih ur: 6.383 h Stroj je v zelo dobrem stanju in si ga lahko kadarkoli ogledate v naši hali pod napetostjo. Obseg dobave vključuje oba vpenjalna stolpa. Proizvajalec: Doosan Tip: HC 400 Itsdsyl Iu Ejpfx Ab Aeg Leto izdelave: 2011 Krmiljenje: Fanuc Series 32i-MODEL A Tehnični podatki: Pomiki X-Y-Z: 600x560x565 mm B-os: 1° delitev (indeksacijska miza) Hodi X-Y-Z: 40 m/min Podajalne hitrosti: 20.000 mm/min Velikost palete: 400x400 mm Hitrost vretena: 8.000 vrt/min Vpenjanje orodja: SK40 Teža stroja: 11.000 kg

Stanje: rabljeno, Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 7360.32, Stroj: Studer S40-4 Itjdeyilirepfx Ab Aog Serijska številka: 7360.32 Leto izdelave: 1991 Krmiljenje: Sinumerik System 3 Napajanje: 22 kVA

Stanje: rabljeno, Leto izdelave: 1994, Technical details: Itsdpfsvgbzdjx Ab Ajg Grinding diameter: 300 mm Grinding length: 600 mm Centre height: 190 mm Z-axis: 865 mm X-axis: 250 mm Clamping length: 1000 mm Peripheral speed: 45 m/sec Grinding slide swivel range +/-: 8° Grinding wheels (width x diameter): 80 x 508 mm Workpiece spindle speed: 1 - 800 rpm Machine weight approx.: 5 t Machine equipped with SIEMENS 840 C control - Coolant device - MARPOSS

Stanje: rabljeno, Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3520.17.137, Tripet TST201CNC no. 3520.17.137, year of manufacture 1987 Power kW: 76 Iodpfxowffmms Ab Aetg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Control: Siemens Sinumerik 840D Travel paths X/Y/Z: 560 x 560 x 510 mm Spindle speed: 15,000 rpm 2-station pallet changer, 400 x 400 mm Tool magazine for 40 tools, SK 40 Itedpfx Abeyrir Sj Ajg Paper filter Chip conveyor

Stanje: rabljeno, Leto izdelave: 1996, Grinding diameter: 5 - 255 mm Grinding length: 400 mm Centre height: 130 mm Plunge grinding length: 50 mm Control: SINUMERIK 805 Grinding spindle speed: 25 - 1400 rpm Workpiece spindle speed: 0 - 500 rpm Cross-feed of grinding spindle slide: 0 - 5000 mm/min Table speed: 0 - 5 m/min Grinding wheel diameter: 450 mm Total power requirement: 10 kW Machine weight approx.: 2.3 t Space requirement approx.: 2.65 x 2.2 x 2.35 m Itjdstqqtrspfx Ab Ajg Accessories: Grinding wheel with flange, 3-jaw chuck, electronic handheld control panel