Stroj za notranje in površinsko brušenje

Tripet TST201 CNC

Stanje: dober (rabljeno), Leto izdelave: 2014, Spindle speeds: 170 - 18,000 rpm Machine weight: approx. 7.5 t Space requirements: approx. 5.00 x 4.00 x 2.20 m --> CNC retrofit (2014) to Siemens Sinumerik 840D Solutionline --> Overhaul of new control system in 2016 --> Technical Data: Grinding diameter: 20 - 300 mm Swing diameter: 350 (500) mm Workpiece length: 300 (1,300) mm Recommended grinding depth up to: 300 mm Z-Axis Grinding Table Stroke (total): 650 (950) mm Resolution: 0.001 mm Duodpfx Apew Intaslet Rapid traverse: 12 m/min Grinding feed speed: 0 - 9.99 m/min Feed rate: 0 - 99.99 m/min Incremental feed per reversal: 0 - 0.999 mm X-Axis Grinding Table Stroke (total): 150 mm Resolution: 0.001 mm / Ø Rapid traverse: 5 m/min / rev Grinding feed speed: 0 - 5 m/min / rev Feed rate: 0 - 99.99 m/min / rev Incremental feed per reversal: 0 - 0.999 mm / Ø Workpiece spindle head swiveling range: B axis: -32° (-23°) / +2° Resolution: 0.0001° (0.36") U-Axis stroke (total): 300 mm Resolution: 0.001 mm / Ø Traverse speed: 5 m/min Centre height above work table: 200 (300) mm Centre height above grinding table: 330 (430) mm Workpiece spindle bore: 50 (70) mm Original year of manufacture: 1988

Stanje: dober (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, Proizvodna linija za pelete na osnovi italijanske stiskalnice Zepi, z mlinom na kladiva, hladilnikom peletov in sejalnikom. Stroji so zelo zmogljivi in zanesljivi. Nekateri deli, kot je mlin na kladiva, so popolnoma obnovljeni. Leto izdelave 2007. Duodpfevx S Rysx Aplot

Stanje: rabljeno, Leto izdelave: 1992, hitrost vretena (min.): 7.500 obr/min, največja hitrost vretena: 24.000 obr/min, 4 motor-driven grinding spindles (liquid-cooled, with purge air / oil mist lubrication) including the REFU HF frequency converter, e.g., suitable for powering the spindles of a Voumard 400 CNC T4. Grinding spindle GMN TSSV 170-7500 7,500 rpm, 350V, 19.3A, 7.5kW, 250 Hz Grinding spindle Voumard BM15-170 15,000 rpm, 350V, 35A, 18kW, 250 Hz Grinding spindle Voumard BM18-15032 18,000 rpm, 350V, 28.5A, 12kW, 600 Hz Grinding spindle Voumard BM24-150 24,000 rpm, 350V, 27A, 12kW, 800 Hz REFU HF Frequency Converter 316/25 High-frequency converter (inverter, frequency converter) Frequency converter, frequency inverter for powering motor spindles Dodpfel Tn Afox Apljut GMN tool spindle, motorized grinding spindle The spindles are fully functional but are sold without warranty – year of manufacture approx. 1992. A batch of various grinding spindle shafts / arbors for grinding wheels is available for these spindles and can be purchased separately. Price / details on request. All technical data subject to errors and misprints. We sell exclusively to countries of the European Community.

Stanje: dober (rabljeno), Studer S30-12 Cylindrical Grinding Machine TECHNICAL DATA Main Dimensions Centre Height: 125 mm Centre Distance: 400 / 700 / 1025 mm Maximum Longitudinal Slide Travel: 400 / 700 / 1000 mm Longitudinal Slide Table Speed: 50 – 5000 mm/min Reversal Delay: 0-6 s Smallest Automatic Travel: 1.5 mm Maximum Travel: 400 / 700 / 1020 mm Maximum Table Swivel: 12 / 30 / 78° Cross Slide Swivel Range: ±45° Rapid Adjustment: 40 mm Handwheel Feed Travel: 20 mm Maximum Infeed Depth: 1.7 mm Grinding Spindle Head Grinding Wheel Diameter x Width x Bore: 450 x 80 x 203 mm Spindle Speed: 1340 / 1500 / 1625 / 1800 / 2000 / 2200 rpm Coarse Adjustment: 210 mm Workpiece Spindle Head Swivel Range: 0 – 90° Speed Range: 30 – 675 rpm Mounting Taper: Morse 5 Collets: W25 Tailstock Dedpfx Aovca Izsplout Mounting Taper: Morse 3 Quill Travel: 30 mm Total Power Requirement: 5 / 8.25 kW No guarantee is given for the correctness, completeness, or topicality of the information provided.

Stanje: dober (rabljeno), Leto izdelave: 2013, Premer brušenja 140-355 mm Dolžina brušenja 3000 mm Višina konic 260 mm Teža stroja ca. 8,3 t Prostorska zahteva ca. 8500 x 3500 mm Leta 2013 popolnoma obnovljen in vgrajen nov SPS Siemens S7 krmilnik. Brezstopenjske vrtilne hitrosti, enota za uravnoteženje, Zunanja cilindrična brusilka SA 6Ux3000 Leto izdelave 1981 Retrofit 1 x 2013 SERWEMA Maks. premer brušenja / s konjičkom 140 mm Maks. premer brušenja / brez konjička 355 mm Maks. dolžina brušenja 3.000 mm Višina konic 260 mm Dusdpfx Aeynmpyjpljt Maks. teža obdelovanca 500 kg Prostorska potreba stroja 8500 x 3500 mm Teža stroja 8500 kg

Stanje: zelo dobro (rabljeno), Grinding length without magnetic chuck: 1500 mm Maximum grinding width: 750 mm Longitudinal travel (X axis): 1520 mm Cross travel (Y axis): 650 mm Vertical travel (Z axis): 690 mm Grinding wheel diameter: 406 x 100 mm Spindle speed: 1400 rpm Weight: 8600 kg Accessories: Braillon magnetic chuck 1000 x 500 mm Duedpfx Apowlh Adolot Elcon 3 electronic control

Stanje: rabljeno, TECHNICAL SPECIFICATIONS - Number of axes: 7 - Number of spindles: 2 - Number of turret heads: 2 MAIN SPINDLE - Spindle nose: A2-5" - Spindle drive power: 11 kW - Spindle speed: 6000 rpm - Max. bar diameter: 51 mm - Max. machinable diameter: 195 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle nose: A2-5" - Spindle drive power: 7.5 kW - Spindle speed: 6000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001° TRAVEL Dujdpfx Aow Efgaopljt - Z-axis travel: 400 mm - X-axis travel: 150 mm - Rapid traverse speed: 36 m/min - Distance spindle / sub spindle: 600 mm TURRET 1 - Number of positions: 24 - Number of driven positions: 12 - X/Z travel: 400/150 mm - Y travel: +/- 40 mm - Driven tool speed: 6000 rpm - Driven tool power: 7.1 kW TURRET 2 - Number of positions: 9 ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Floor space required: 3072 x 1974 mm - Machine height: 1799 mm - Machine weight: 6500 kg EQUIPMENT - Control: Fanuc 0i-TF PLUS - Interfaces: Ethernet / RS232 / USB / PCMCIA - Teach-in programming - 3-color status lamp - Coolant tank * Internal coolant supply (ICS) - Chip conveyor: DROITE LNS MH500 - Tool measuring probe system - Parts removal unit - Parts conveyor belt - Bar feeder preparation - Electrical transformer

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Centre height: 181 mm Centre distance: 1000 mm Max. grindable workpiece diameter: 360 mm Max. cantilever load: 1000 N (100 kg) Max. load between centres: 3000 N (300 kg) Z-axis: Table swivel angle: 10° Hydraulic table drive: 0-4 m/min X-axis: Cross slide travel: 80 mm Rapid traverse (hydraulic): 50 mm Coarse adjustment (air cushion): 280 mm Feed drive via DC motor Rapid feed speed: 48 mm/min/Ø Feed operation: Plunge grinding / longitudinal grinding 4 presettable feed rates mm/min/Ø: 0.01-48 4 presettable feed amounts mm: 0.001-0.1 Sparkout during form grinding: 0-99 s / 0-99 strokes Tip feed mm/Ø: 0.001 Grinding spindle head: Universal, swiveling 0-180° Grinding wheel (external): D x w x d mm: 500 x 100 x 127 or 203.2 Grinding wheel (face; option): D x w x d mm: 250 x 32 x 76.2 Grinding wheel (internal; option): D mm: (2-250) Drive power – external/face: 5.5 (7.5) kW Drive power – internal: 2.2 kW Peripheral speed – external: 35 (50) m/s Grinding wheel wear (external): 160 mm/Ø Guard width: 100 mm Grinding spindle diameter: 60 mm Internal spindle mounting: 80 (100) mm Dsdpfx Apjtqf Rzslout Workpiece spindle head: Infinitely variable drive: Mk 4, 1/min: 30-270 / 50-450 Workpiece spindle lockable Spindle mount: Mk 4/24 mm Spindle nose for flange mounting: Mk 4, cylindrical Ø63H6 x 6 mm Workpiece spindle head swivels on rotary part: 0-90° Tailstock: Quill mounting/quill diameter: Mk 4/750 mm Quill stroke: 45 mm Quill force: 100-800 N / 250-1400 N adjustable Quill operation: manual (foot switch) Fine quill adjustment: ±40 µm Connection values: Total machine connected load: 6.5-10 kW Grinding spindle head: 5.5 (7.5) kW Workpiece spindle head: 0.55 (1.1) kW Coolant filtration: 0.75–2.2 kW Lubrication pump for guideways: 0.1 kW Hydraulic pump: 1.5 kW Hydraulic reservoir: 80 L Pneumatic system: 6 bar Comparable to: Weiss / EMAG / GP cylindrical grinders / Studer / Kellenberger / Schaudt / Tschudin / Tacchella / Dannobat

Stanje: generalkompletno obnovljen (rabljeno), Centerless cylindrical grinding machine MONZESI ROSSI MONZA 1500 (currently being overhauled and fully electrically/electronically retrofitted) Siemens electronics with touchscreen, brushless motor for the Z-axis (workpiece diameter) and regulating wheel (variable RPM), stepper motor for grinding wheel dressing increments, automatic size compensation after dressing the grinding wheel Grinding wheel: 350 mm diameter x 610 mm width This machine can be inspected at our warehouse in Gussago (BS), Italy. Duodpsmmqirofx Apljt Plunge Grinding With the plunge grinding process, workpieces with stepped or profiled external surfaces—such as nozzle needles, valves, journal crosses, gearbox and electric motor shafts—are machined. Available technologies include straight or angled plunge grinding, plunge grinding for single or multiple workpieces, plunge grinding in several operations (simultaneously or sequentially), and oscillating plunge grinding. Through-feed grinding is used for machining unprofiled workpieces, such as cylindrical and tapered rollers, rings, rods, and hydraulic slide valves. This grinding process is highly productive and mainly used for series and mass production of precision components.

Stanje: novo, Leto izdelave: 2025, Powder Coating – The perfect layer for lasting protection. Powder coating is a highly effective and widely adopted method for applying a protective and decorative finish to various types of surfaces. It is a dry finishing process in which a fine powder composed of resins, pigments, and additives is applied to a substrate. The powder is electrostatically charged, ensuring uniform adhesion to the surface and forming an even coating. To achieve optimum adhesion and durability, the substrate is thoroughly cleaned and prepared beforehand. Oils, dirt, and other contaminants are removed to ensure a clean surface. This step is essential to ensure effective bonding of the powder with the substrate, resulting in a robust and long-lasting coating. A typical powder coating system consists of several components and devices required for the application and curing of powder coatings. Powder spray booth and spray area The booth provides a controlled environment for the application process and ensures uniform powder distribution. Powder coating gun A powder coating gun is used to apply the powder coating to the workpiece. Dedpfswf Dpgsx Apleut Powder supply system The powder supply system comprises a hopper or container for storing the coating material. It typically includes equipment such as powder pumps, feed hoses, and powder sieves to convey powder from storage to the spray gun. Pretreatment equipment Pretreatment systems prepare the substrate prior to powder coating application. This may involve processes such as cleaning, degreasing, rinsing, and surface treatment to ensure optimal adhesion and durability of the finish. Curing oven A curing oven is a vital component of a powder coating plant. It is used to heat the coated substrate to the appropriate temperature, allowing the powder coating to melt, flow, and cure into a durable surface. The oven commonly features a conveyor or racks to transport coated parts through the curing chamber. Exhaust system An extraction system is installed to remove excess powder, fumes, or volatile compounds generated during the coating process. It helps maintain a clean and safe working environment for personnel and prevents the accumulation of powder particles in the air.