Laserski stroj za rezanje CNC

Trumpf Trumatic L 3020

Stanje: dober (rabljeno), Leto izdelave: 2003,

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, 5-Axis CNC Machining Center Year: 2006 Control: Heidenhain iTNC 530 Technical specifications: X-axis travel: 880 mm Lsdpfewn A Slsx Af Asrw y-axis travel: 630 mm z-axis travel: 630 mm Max. torque: 130 Nm Tool holder: SK 40 (ISO 7388IIB) Tiltable axis B: 103° Working table: Clamping surface: 1,250 x 700 mm Rotary table diameter: 700 mm Rotatable axis C: 360° Max. table load: approx. 500 kg T-slots: 11x 14 mm x 63 mm Tool magazine: Number of tool stations: 32 (2x 16) positions Tool holder: SK 40 (ISO 7388IIB) Max. tool diameter: 80 / 130 mm Max. tool diameter with adjacent stations free: 160 mm Max. tool length: 315 mm Max. tool weight: 8.0 kg

Stanje: dober (rabljeno), Leto izdelave: 1997, številka stroja/vozila: 887043, Offer 24557 Lredpfx Afsu T Nkne Aow Technical Data: - Maximum working length: 4060 mm - Column gap: 3680 mm - Maximum pressing force: 1700 kN - Maximum distance, table / ram: 385 mm - Throat depth: 410 mm - Ram stroke: 215 mm - Stroke speeds: - Downward approach speed (idle), max.: 200 mm/sec - Return speed: 135 mm/sec - Pressing speed (downwards): 1 to 11 mm/sec - Total drive power: 30 kW - Space requirements approx.: W 5600 x H 3000 x D 2400 mm - Weight approx.: 18,000 kg Equipped with: - 6-axis CNC control, DELEM - Two-hand control panel with foot switch - Crowning device - CNC-controlled backgauge with height adjustment 5 to 860 mm - Hydraulic upper and lower tool clamping - Die table shifting, pneumatically assisted

Stanje: novo, Leto izdelave: 2025, Cutting diameter 335 mm Saw blade length 4400 x 34 x 1.1 mm Table height 750 mm Feed 5 - 2300 mm per stroke Cutting area at 90 degrees: flat 500 x 335 mm Cutting area at 45 degrees: round 330 mm Cutting area at 45 degrees: flat 320 x 335 mm Cutting area at 45 degrees: round left 305 mm Cutting area at 45 degrees: flat left 305 x 335 mm Cutting area at 30 degrees: round 180 mm Cutting area at 30 degrees: flat 170 x 335 mm Cutting speed 15 - 150 m/min Workpiece weight max. 250 kg/m Total power requirement 3.0 kW Lredpfx Aeulnb Dsf Ajw Machine weight approx. 2,550 kg Space requirement approx. 4350 x 2300 x 1900 mm Standard equipment of the MEBAeco 335 DGA-2300: - Safety system according to CE standards using light barrier - Proven MEBA double-column linear bandsaw design with integrated MEBA gripper feed system, stroke length 5 - 2300 mm - MEBA - Visualized program entry with CNC control Fully automatic operation with freely selectable angles between 30° - 135°, length and quantity. Simplified program creation and management for up to 255 programs. The operator enters the sawing tasks via a cut diagram display panel. Input errors are minimized, allowing simple and reliable production order creation by different operators. - MEBA high-performance package: Saw feed via servo-controlled ball screw drive with automatic cutting pressure and feed monitoring, guaranteeing optimal conditions for each cutting job: constant pressure for solid material, constant feed for thin-walled profiles. - Fast and precise material length feed via rack and pinion and AC drive, max. stroke length 2300 mm with integrated roller conveyor up to 3000 mm. - Dual-sided opening of the gripper jaws on the feed system. Ribbed inserts for heavy material transport. - Saw frame made from solid, vibration-damping steel welded construction. - Saw band inclined by 3° relative to the material support surface, ensuring top cutting performance and life span when sawing steel construction profiles. - Combined saw band guides, precision bearings for gentle saw band redirection. Beveled carbide slide guides for saw band guidance. - Miter rotation point (zero point) is the intersection of the saw band and the fixed clamping jaw; thus, there is no change in cutting length when the angle changes. The cutting kerf width is automatically compensated at each angle position. - NC miter angle programming. Control panel is always free-standing for these systems. - Patented double miter clamping system (ERP No.), automatic positioning of clamping jaws. The clamping device automatically moves along with the material, according to the desired mitre, ensuring material is always clamped squarely and close to the saw band. Material clamping is performed using full stroke cylinders. - Rapid-lowering of the saw frame via automatic height selection just above the workpiece. In serial cutting, the saw frame travels just above the material, allowing the next workpiece section to be positioned. Optimal cycle times for both single and serial cutting. - AC frequency-controlled saw band drive, continuously adjustable from 15 - 150 m/min - Backlash-free, preloaded, low-maintenance linear ball guides for material feed and saw frame feed, ensuring smooth and jerk-free operation.

Stanje: novo, Special promotional price for stock items. Only while stocks last. Price ex warehouse, plus VAT. Workshop Press WK 50 FH Pro Lrjdpfx Afob Elguo Aew Pressing force: 50 t Piston stroke: 200 mm Table width: 260 mm Clearance (E): 730 mm Clearance (F): 205 mm Distance cylinder to table (F1): 75 mm Distance cylinder to table (F2): 1050 mm Transverse cylinder adjustment (M): 240 mm Width (A): 1040 mm Depth (B): 800 mm Height 1 (C): 1835 mm Height 2 (D): 1880 mm Weight approx.: 287 kg Features: - Equipped with a winch for easy height adjustment of the work table - Self-regulating hydraulics for energy-saving piston advance - High-performance workshop press suitable for trades and repair shops - Optimum price-performance ratio thanks to efficient design - Standard foot pedal allows hands-free operation of the workpiece - Extended range of applications with the optionally available 10-piece press punch set - Pressure cylinder with integrated return spring for piston retraction - Welded steel frame for high load capacity and stability - Versatile usage thanks to left and right adjustable pressure cylinder PROMOTIONAL PRICE ex warehouse Mindelheim. Only for stock items. While stocks last.

Stanje: rabljeno, Technical details: Welding current: 500 A Length: 1000 mm Height: 1350 mm Infinitely variable welding current: 50-500 A Machine weight approx.: 282 kg Dimensions (L x W x H): 1.0 x 0.6 x 1.35 m MIG-MAG Welding Machine 2/4-stroke switching, infinitely variable, welding current display Water-cooled with antifreeze Shielding gas solenoid valve Short hose package Torch head Wire feed: 4-roll drive for wire Ø 0.8/1.0/1.2 mm Ljdov Rbdtjpfx Af Aorw EARTH CABLE AVAILABLE ON REQUEST!

Stanje: potreben popravila (rabljeno), Funkcionalnost: omejena funkcionalnost, Proizvajalec: Hamba Maschinenfabrik GmbH Tip: 2400 Lodpfx Afskkglaj Ajrw Leto izdelave: neznano, generalno obnovljeno pri Grunwaldu leta 1993 Zmogljivost: do 2.400 lončkov/uro (odvisno od izdelka) Steze: 1-stezna, 12-mestna Polnilni produkt: poltekoči izdelki kot so sveži sir, jogurt, smetana, ayran ipd. Polnilna prostornina: 100 - 500 ml, nastavljivo Format lončka: okrogel, 95 mm Vrsta zapiranja: alu-folija, zatesnitev Priključne vrednosti: 380 V, 50 Hz, 1,7 kW Izstopni trak je vključen Opcijsko: Stroj je mogoče obnoviti

Stanje: rabljeno, Linija za razrez na dolžino Delta-Alcos 72”x0,5”x60.000 lb (A3770) Proizvajalec: Delta / Alcos Širina materiala: 36" - 72" Obdelovalna debelina: 0,048" - 0,530" Nosilnost: 60.000 lbs Notranji premer koluta: 16" - 24" Zunanji premer koluta: 72" Mejna trdnost: 50.000 PSI Smer delovanja: desno na levo Transporter za skladiščenje kolutov Vhodni voziček za kolute Hidravlično dvigalo in prečnik Stožčasti odvijalnik Enosmerna motorna zavora Drsna osnova Wichita hladilna zavora Pogonski pritisni valj Hidravlična luščilna miza Pogonski pomik noter in ven Pogonjen komplet stiskalnih valjev Delta izravnalni valji 4-Hi Leveler Število delovnih valjev: 9 Premer delovnih valjev: 8" Širina delovnih valjev: 82" Motorni vzpon in spust podložnih valjev Enosmerni motor in pogon Delta korektivni 4-Hi izravnalni stroj Število delovnih valjev: 19 Premer delovnih valjev: 4" Širina delovnih valjev: 82" Motorizirani podložni valji Motorno nastavljanje delovnih valjev Enosmerni motor in pogon Alcos mehanske škarje Spodrezne škarje Vhodni pogonski stiskalni valji Pnevmatska sklopka in zavora Izmenični motorni pogon Alcos nakladalnik s spuščanjem plošč Lsdpfjixqg Nox Af Asrw Dolžina pločevine: 40’ Pogonski izhodni in končni transporterji Digitalna zaslonska plošča na dotik Upravljalna postaja s potisnimi gumbi Digitalni prikazovalniki Hidravlika, elektrika, krmilje – trenutno nameščeno

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2014, laserska moč: 3.000 W, X Working Area max.: 2500 mm Y Working Area max.: 1250 mm Control: IndraMotion MTX Laser Power: 3000 Watt Standard Equipment: Machine - Coordinate guides for highly precise machining - Sturdy, easily accessible C-frame - Linear tool magazine with 21 tool positions and 4 clamps - Drives with maintenance-free three-phase servo motors - Repositioning unit with programmable hold-down - Foot pedal for closing clamps - Ball tables - 2 parts flaps, 500 mm x 500 mm - FocusLine - NitroLine - FastLine - Ejection cylinder for laser parts - Slag cone detection TRUMPF Laser - Solid-state laser TruDisk 3001 with 1 fiber outlet - Excitation via pump diodes - Fiber cable according to standard layout (10m) - Laser control TruControl 1000 - Cooling unit - Laser logbook function Cutting Head - Solid-state laser compact cutting unit - ControlLine Punching Head - Electro-hydraulic punching head - Rotatable mono-tool holder - Tool length compensation - Programmable hold-down (active / passive / repositioning) - Stroke counter for punches and threads - Spray lubrication for punches - Punch slug extraction - Calculation of fill level on the punching console - Level monitoring for thread forming and tool lubrication Control - Open control based on Rexroth IndraMotion MTX - Operator panel with 17" touch display - Program management Lrsdpfx Afowld Sus Asw - Production planning - Integrated technology data - Remote teleservice via Internet - Programmable cutting gas pressure - Automatic shut-off with wake-up mode Data Transfer - USB interface - RJ-45 network connection Safety - CE marking - Dual-beam light barriers - Monitoring system for gas pressure, temperature, cooling water, etc. - Hydraulic quick shut-off - Protection against stray radiation - Compact extraction system - MultiTool function - MultiBend function - Thread forming function - Engraving function - Deburring and rolling technology - SoftPunch function - StripLine - Lowerable die - Spray lubrication die incl. fill level monitoring - Additional clamp - 4 height-adjustable clamps - Vibration-damped installation - Chip conveyor with tilting container - Blowing device for small parts - Warp detection SheetMaster - Unloading platform - Suction frame with 36 suction cups - Peeling suction device - Vacuum sensors for each suction cup - Double sheet detector for double sheet check - Central lubrication - TRUMPF control based on Rexroth IndraMotion MTX - Automatic clamp closing for machine - Simultaneous loading and unloading during main operation - Peeling system incl. positioning aid for medium format (2500x1250) - First standard auxiliary suction package - Second standard auxiliary suction package - Unloading monitoring for laser parts GripMaster - Parts conveyor belt, punching station - Parts conveyor belt, laser station ToolMaster with 70 stations (punching mode only) - Simultaneous tool change during main operation (ToolMaster)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Turning-milling center Takisawa TMM 250 3, year of manufacture 2016, Fanuc control Turning length: 1300 mm Turning diameter: 350 mm Lodpfx Aort Ip Nof Asrw Spindle speed (max.): 4000 rpm 9 axes 2 x spindles 2 x C-axis Swing diameter: 780 mm Max. turning diameter: 350 mm Max. turning length: 1,300 mm Chuck diameter left: 250 mm Chuck diameter right: 200 mm Upper tool carrier with Y-axis 260 mm and B-axis 230° / +/- 115° Complete with 30-position tool changer Lower tool turret: 15-station revolver – all positions driven Fully simultaneous 5-axis machining with turning/milling support. Tool changer with 30 stations Workpiece magazine, right side of the machine, with gantry handling Driven tools at the turret C-axis for left and right spindle Chip conveyor Internal coolant supply through milling spindle, 20 bar Due to excessive administrative expenses (customs regulations), we do not deliver to Turkey, Iran, Russia, or Belarus.