Nožno stikalo

Trumpf Sunimat 400

Stanje: rabljeno, Leto izdelave: 2001, Press force 0.2–40 t Max. workpiece diameter: 70 mm Thread length: 120 mm Control system: Total power requirement: 29 kW Machine weight: approx. 9.5 t Space requirement: approx. m Offer We are pleased to offer you, subject to prior sale and errors in technical specifications, from our stock: PROFIROLL – BAD DÜBEN (Germany) CNC Thread, Gear, and Profile Rolling Machine Model: ROLLEX Year: 2001 Rolling force, steplessly adjustable: 0.2–40 tons Lodpfet Hw N Tjx Al Nohf Rolling spindle diameter: 120 mm Max. workpiece diameter (approx.): 70 mm Each spindle drive: approx. 8.5 kW Total connected load: approx. 29 kW – 400 V – 50 Hz Weight: approx. 9,500 kg Accessories / Special Features: • The machine is equipped with a modern CNC control system developed by the manufacturer. All relevant process and workpiece parameters can be entered, allowing quick and easy changeover for different workpiece sizes (changeover time). All process parameters are graphically displayed on the monitor, providing the user with an optimized process cycle. • Integrated (workpiece) center rolling device for shaft-shaped workpieces (such as gear shafts) with center holes, including a clamping device and prismatic positioning fixtures for pre-aligning the workpiece before clamping, as well as a motorized (driven) tailstock center on the front side of the workpiece. The workpiece slide stroke is approx. 500 mm—thus, the workpiece is clamped and hydraulically moved between the two rolling tools. • Hydraulic oil chiller, separate electrical cabinet, CNC control panel, etc. • Transparent safety enclosures in the working area. Centralized lubrication.

Stanje: rabljeno, Dvotirni mostni žerjav 50T DEMAG Proizvajalec DEMAG Tip Dvotirni mostni žerjav Industrijske uporabe Težka dvigovanja v panogah, kot so jeklarska industrija, ladjedelništvo, težka industrijska delavnica, logistična središča ali pristaniške inštalacije. Lsdoxfh I Djpfx Al Njhf Glavne tehnične specifikacije - Nosilnost: 50 ton - Razpon: 28 metrov - Konstrukcija: Dvotirna - Proizvajalec dvižnega sistema: DEMAG - Namestitev: montaža na tirnice ali nosilce - Upravljanje: radijsko daljinsko vodenje ali upravljalska kabina, odvisno od instalacije - Uporaba: notranja ali zunanja, glede na izvedbo - Ojačano ogrodje za ekstremne obremenitve 🧩 Uporaba stroja Dvotirni mostni žerjav DEMAG 50T je zasnovan za težka dvigovanja v zelo zahtevnih industrijskih okoljih. Razpon 28 metrov omogoča varno in natančno manipulacijo z velikimi in težkimi tovori ter izboljšuje delovne tokove v proizvodnji, vzdrževanju ali skladiščih. ⚙️ Lastnosti / prednosti Ta model izstopa po izjemni nosilnosti 50 ton, 28-metrskem razponu, ojačani dvotirni konstrukciji ter napredni DEMAG tehnologiji dviganja, ki zagotavlja robustnost, zanesljivost in stabilnost za ekstremno zahtevne aplikacije. Idealna izbira za obrate, ki zahtevajo kontinuirano visoko zmogljivost.

Stanje: generalkompletno obnovljen (rabljeno), Thread rolling machine - Thread rolling machine ORT RP18 2-roll Refurbished - new Siemens PLC See video The machine is in our warehouse in Gussago BS, under power Test run possible Mimu Werkzeugmaschinen Ljdpfx Asvxa Dbjl Njhf Rolling is a mechanical process without chip removal that can be performed cold or hot, with the purpose of improving surface finish (and thereby fatigue performance).

Leto izdelave: 1987, stanje: rabljeno, Newly Refurbished Single-Girder Full Portal Slewing Crane Configured for four-rope grab operation as well as hook operation Lifting Capacity (Grab Operation): approx. 8.0 t at outreach approx. 12.0 to 25.0 m Lifting Capacity (Hook Operation): max. approx. 12.5 t Lifting height above track level with boom approx. 25.0 m / max. approx. 22.9 m Ledpfx Asdlazgol Njhf Full portal gauge previously/now shortened: approx. 6.0/5.2 m Manufacturer/Refurbishment: TAKRAF/TEICHMANN Year Built/Refurbished: 1987/2005 Total Weight: only approx. 90.0 t Crane equipped with drive-under full portal, intermediate column for raising the boom hinge point, completely enclosed upper crane, fully refurbished with brand new electrics (frequency inverter control), operator cab, control seat, motor cable drum, and new preservation coating in 2005 Working Speeds: Hoisting mechanism current/optimized: approx. 52.0/65.0 m/min Boom luffing: approx. 35.0 s Slewing gear: approx. 1.2/2.4 rpm Crab travel gear: max. approx. 50.0 m/min

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2026, ORT RP30 MS 2 valja 30 ton Valjčna orodja za rezanje navojev, nazobčevanje, majhna zobata kolesa Lodpsuykz Dofx Al Nshf Leto izdelave: 2009, elektronska prenova in nadgradnja s Siemens PLC (2026). Stroj je pod napetostjo na naši lokaciji v Gussago BS. Možnost preizkusa. Mimu orodjarni stroji Valjanje je mehanski proces brez odstranjevanja odrezkov, ki ga lahko izvajamo hladno ali vroče, da izboljšamo kakovost površine (posledično tudi utrujenostno obnašanje). Kapaciteta (tona): 30 Število valjev: 2

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2015, obratovalne ure: 3.065 h, številka stroja/vozila: HR12332, nosilnost: 227 kg, lastna masa: 2.720 kg, gradbena višina: 2.720 mm, vrsta goriva: dizel, skupna dolžina: 9.420 mm, vrsta pogona: Diesel, doseg roke: 17.100 mm, gradbena širina: 2.490 mm, delovna višina: 17.100 mm, Telescopic Work Platform Chassis Number: HR12332 Condition: Operational and fully functional Technical Condition: Normal Front Tyre Condition: 60–80% Rear Tyre Condition: 60–80% Description: Fully workshop-inspected, UVV safety inspection, emission test (AU), and general inspection newly carried out. Lhjdpfx Ajv Dpbael Nef

Stanje: dober (rabljeno), Operating unit, control panel, operator panel, control unit, foot switch, safety foot switch - Foot switch: Safety foot switch from press brake Promecam STPC 250 40 121 Lodpfxshqf Rro Al Njhf - Metal housing: with protective hood - Overall dimensions: 380/180/H165 mm - Weight: 6.7 kg

Stanje: rabljeno, Control unit, control panel, operator panel, operating unit, foot switch, safety foot switch -Foot switch: Safety foot switch from a Promecam STPC 250 40 121 press brake -Metal housing: with protective cover Ljdpfx Aohqf R Ijl Nehf -Overall dimensions: 500 x 400 x H220 mm -Weight: 6.5 kg