Orodno držalo pogonska kotna glava

Traub TNL 18

Stanje: rabljeno, Leto izdelave: 2013, obratovalne ure: 43.000 h, Funkcionalnost: popolnoma funkcionalen, moč vretenovega motorja: 3.700 W, največja hitrost vretena: 10.000 obr/min, skupna masa: 5.000 kg, skupna širina: 1.500 mm, skupna dolžina: 4.000 mm, skupna višina: 2.400 mm, hitro pomikanje X-os: 20 m/min, hitri pomik os Y: 20 m/min, hitri pomik na osi Z: 40 m/min, moč: 24 kW (32,63 KM), pomik po osi Z: 205 mm, Oprema: dokumentacija / priročnik, Nudimo naprodaj enega izmed naših strojev, ki ga izločamo kot del načrtovane obnove našega strojeparka. Stroj je TRAUB TNL 18P stružnica z drsnim vretenom, letnik 2013, ki je v dobrem tehničnem stanju. Razlog za prodajo je nabava nove tehnologije v okviru nadgradnje strojeparka. Trenutne delovne ure znašajo 43.000. Ponudba vključuje tudi podajalnik palic FMB Minimag 20/3200, ki zagotavlja nemoteno in učinkovito dovajanje materiala v stroj. V okviru dobave lahko zagotovimo tudi notranjo opremo, vključno z vodili in vpenjalnimi vložki za glavno vreteno, protivreteno in podajalnik palic, primerno za materiale do premera 12 mm. Godjxdk Ukopfx Afqobg Za več informacij me prosim kontaktirajte.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 13.116 h, Max. bar capacity mm 20 Max. Z-axis travel, sliding/fixed headstock mm 1) 205 / 80 Max. spindle speed rpm 10,000 Drive power 100%/40% duty cycle kW 3.0 / 5.5 Torque 100%/40% duty cycle Nm 5.73 / 10.5 / max. 17.2 C-axis resolution degrees 0.001 Max. rapid traverse Z m/min 20 Tool stations qty. 8 Powered tool stations qty. 8 Max. tool speed rpm 12,000 / 8,000 Tool holder diameter mm 45 Drive power 100%/40% duty cycle kW 1.0 / 2.0 Turning tool section mm 16x16 / 20x20 Slide travel X mm 120 / 165 Slide travel Y mm ±25.4 Slide travel Z mm 254 / 567.5 Rapid traverse X / Y / Z m/min 20 / 20 / 40 Swivel angle B-axis degrees 105 Lower turret: Tool stations qty. 8 Powered tool stations qty. 8 Max. tool speed rpm 12,000 Tool holder diameter mm 45 Drive power 100%/40% duty cycle kW 1.0 / 2.0 Turning tool section mm 16x16 / 20x20 Slide travel X mm 120 Slide travel Y mm ±25.4 Slide travel Z mm 155 Rapid traverse X / Y / Z m/min 20 / 20 / 40 Back working attachment: Tool stations qty. 4 Slide travel X / Y / Z mm 120 / ±25.4 / 155 Tool holder diameter mm 25 Sub spindle: Max. spindle bore mm 20 Max. spindle speed rpm 10,000 Drive power 100%/40% duty cycle kW 3.0 / 5.5 Torque 100%/40% duty cycle Nm 5.73 / 10.5 / max. 17.2 Slide travel X mm 235.5 Slide travel Z mm 258 C-axis resolution degrees 0.001 Rapid traverse X / Z m/min 20 / 40 Coolant unit (basic): Pump pressure bar 3 / 8 Tank capacity l 250 Delivery rate at 3 / 8 bar l/min 80 / 120 Filtration fineness µm 200 Machine dimensions: Length x width x height mm see installation plan * Weight kg 5,000 * Connected load kW 40 (47 kVA) Gsdpfx Aswuddvofqobg

Stanje: dober (rabljeno), Notranja št. artikla: 25091 Pogonski nosilec orodja Nastavljiva kotna glava Index / Traub Gsdpsxvaqlofx Afqjbg Št.: W 7045011A Zelo dobro ohranjen! Nosilec je bil uporabljen na stroju Traub TNL18.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Traub TNL 18-7B CNC Automatic Lathe Base Machine: 2441 x 1396 mm Weight: 3800 kg Spindle Height Above Floor: 3800 mm Connected Load: 24 kW Main Spindle Max. Bar Capacity: 18 mm Max. Speed: 12,000 rpm Corner Speed: 5,000 rpm Z-axis Stroke: 205 mm Rapid Traverse: 40 m/min Measuring System Resolution Z: 0.001 mm Feed Force: 3000 N Spindle Nose / Short Taper: Traub short taper interface Max. Clamping Force: 1400 daN Max. Clamping Pressure: 40 bar Min. Clamping Pressure: 7.5 bar Piston Area: 40 cm² Total Cylinder Stroke: 5 mm Draw Tube Thread: M25 x 1 Counter Spindle Workpiece Diameter: 21 mm Clamping Depth Workpiece: 180 mm Max. Speed: 12,000 rpm Travel: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid Traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Max. Clamping Pressure: 30 bar Min. Clamping Pressure: 10 bar Upper Tool Turret with B-axis Number of Stations: 8 Shank Cross-section, Turning Tool: 16 x 16 mm Travel: X: 120 mm Y: -25/+40 mm Z: 250 mm Rapid Traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Tool Change Time: 0.5 sec Measuring System Resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Lower Tool Turret Number of Stations: 7 + counter spindle Shank Cross-section, Turning Tool: 16 x 16 mm Travel: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid Traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Tool Change Time: 0.5 sec Measuring System Resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Driven Tools for Upper Tool Turret Number of Driven Stations: Max. 8 Drive Power: 2 kW Max. Speed: 12,000 rpm Torque: 3.9 Nm Driven Tools for Lower Tool Turret Number of Driven Stations: 7 + counter spindle Drive Power: 3.4 kW Max. Speed: 12,000 rpm Torque: 7.3 Nm Driven Tools for Rear Unit Number of Stations: 7 Number of Drivable Stations: Max. 3 Station Pitch: 46 mm Drive Power: 2 kW Max. Speed: 7,500 rpm Torque: 4.7 Nm Drive Power: 2 kW Max. Speed: 4,000 rpm Torque: 11.8 Nm Gbsdpfx Aswg Takefqjg SCOPE OF SUPPLY Includes (not exhaustive): Traub CNC Lathe Tool holders, driven and non-driven High-pressure and belt filter system Oil mist separator Fire suppression system Chip conveyor Bar loader Operating documentation Exact scope of supply as per photo documentation No guarantee is given for the correctness, completeness or timeliness of the information provided.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2013, obratovalne ure: 1.265 h, Funkcionalnost: popolnoma funkcionalen, največja hitrost vretena: 20.000 obr/min, premer struženja: 4 mm, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, Citizen R-serija avtomatskih stružnic, namenjenih obdelavi majhnih premerov. Stroj je bil zelo malo uporabljen (izdelanih samo 15.800 kosov). Letnik 2013. Opremljen z avtomatskim podajalnikom palic ASP-04. Gbedpfsvtancjx Afqog DDV ni obračunan, če je prodaja izven Turčije.

Stanje: dober (rabljeno), Interna številka artikla: 25092 Poganjalo držalo orodja Nastavljiva kotna glava Index / Traub Št.: W 7045011A Gbsdpfsxvazksx Afqeg Zelo dobro ohranjeno stanje! Držalo je bilo uporabljeno na stroju Traub TNL18

Stanje: rabljeno, CNC multi-spindle automatic lathe INDEX MS 32 C Gsdpfx Afsuhaqbsqjbg

Stanje: rabljeno, Leto izdelave: 2008, Premer kolesa - maks. 300 mm Modul - maks. 8 Modul - min. 0,7 Krmiljenje SINUMERIK 840 D Kot delnega stožca - min./maks. - 90 / + 90 ° Vreteno delovnega predmeta - izvrtina 127 mm Premer brusnega kolesa 50 - 230 mm Število vrtljajev brusnega vretena brezstopenjsko 7.500 U/min Število vrtljajev vretena obdelovanca 700 U/min Skupna potrebna moč 146 kW Teža stroja pribl. 21 t Prostorska zahteva pribl. 9,5 x 3,6 x 3,1 m Merilna sonda za zobno režo (integrirana v brusno glavo) Zunanja brusilna vretena - naprava za hlajenje Odsesavanje oljne megle ELBARON (integrirano v stroju) Gedpfxjvxww Ss Afqebg Filtrirni sistem hladilnega sredstva Hoffmann Uporabljalo se je za serijsko proizvodnjo spiralno zobatih krožnih zobnikov Brez vpenjalnih sredstev Brez brusnih koles / prirobnic za brusna kolesa Brez diamantnih rezil

Stanje: dober (rabljeno), Leto izdelave: 2004, Clamping knife head type (max.) 460 mm Knife head weight (max.) 150 kg Mounting plate diameter for knife heads (Ø) 360 mm Mounting taper for knife heads nominal diameter Ø 58.227 mm Travel path - z axis 200 mm Chart recording magnification ±10 - ±500 µm Machine weight approx. 2.3 t Space requirement approx. 2 x 1.5 x 2.03 m In the manufacturing process for spiral bevel gears, the quality of the gear manufacturing tools used plays a decisive role. Especially in dry milling, high gear quality and long tool life can only be achieved through precisely adjusted knife heads. The Oerlikon Knife Head Setting and Testing Device CS 200 enables quick and easy adjustment of individual blades, checks their position, and documents the measurement results. The measurement process on the CNC-controlled testing device is semi-automated: all actions required to perform the process are shown on the display for operator guidance. The positioning of the individual knives in the knife head, as well as setting the height of the knife tips, is largely automatic thanks to a special procedure, and is simultaneously documented via a run-out diagram. A subsequent measuring process checks the radial position of both the internal and external cutting edges of all knives in the knife head. If individual inspection parameters on the knives do not meet the tolerance requirements, these can be adjusted individually. Thanks to the combination of a semi-automated adjustment process, operator-guided setup actions, and automatic measuring processes, knife heads can be set quickly, conveniently, and with high Gbodpfoul Efmjx Afqsg precision. Operator-guided adjustment and inspection process: - Graphical display of the knife head design as well as measurement results with tolerance verification - Instructions for the operator in plain text (no coded information) - Simple allocation of measurement results to individual knives - Documentation of setup and measurement results via printer - Adjustment and inspection process suitable for stick blade heads of types ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® - Interface for neutral data

Leto izdelave: 2015, Stanje: pripravljen za uporabo (rabljen), A CNC dual-spindle lathe by Traub, fully overhauled in 2025, is available. Turning length: 450 mm, spindle bore: 65 mm, max. speed: 4,000 rpm, main spindle/sub spindle power: 18.5 kW/11 kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5,000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8,000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8,000 N, feed travel: +/- 35 mm. Machine dimensions X/Y/Z: approx. 4,150 mm/2,000 mm/1,800 mm, weight: approx. 4,750 kg, control: Traub System TX 8F, operating hours: 12,938 h. Included: chip conveyor and LNS Quick Load bar feeder. Documentation available. On-site inspection possible. Godpfxov Scrbj Afqjbg