Transportni trak

Transnorm TS1100

Stanje: novo, Leto izdelave: 2021, Transnorm Belt Curve Conveyor Right 90°-1300-1100-IR900 -- NEW RA2332 Technical Data: Frame width (NB): 1300 mm Frame width with bearing cover: 1400 mm Frame width with bearing and gearbox cover (MB): 1500 mm Belt width (GuB): 1100 mm Dedpfx Afevg Nfqsnecd Overall height (BH): 160 mm Height of bottom-mounted motor: 360 mm Motor height (MH): 520 mm Inner radius (IR): 900 mm Conveying angle: 90° Average conveying speed (v m/s): 1.5 m/s Drive: SEW motor with frequency inverter Electrical data: 50Hz V380-500, kW 2.2 / S1 Belt: KT 96 new Year of manufacture: 2021 Optional available: Supports Side guides Prices net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, please contact us. Feel free to reach us by phone or e-mail. We are happy to assist you with planning and implementing your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and contact for intralogistics

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, obratovalne ure: 21.676 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 78 t, širina odprtine za polnjenje: 750 mm, dolžina polnilne odprtine: 1.500 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 25.000 kg, transportna višina: 3.000 mm, kapaciteta rezervoarja za olje: 1.000 l, moč: 55 kW (74,78 KM), lastna masa: 25.000 kg, volumenski pretok: 930 m³/h, obratovalni tlak: 250 letvica, Good day, We are pleased to offer you, on a non-binding basis, a used baler manufactured by Presona AB, model LP 80 VH1. The following technical data has been taken from the manufacturer's operating manual and brochures. We do not assume any liability for their accuracy or completeness. Manufacturer: Presona AB, Sweden Model: LP 80 VH1 Year of manufacture: 2007 Total operating hours: 21,676 hours (as of November 2024) Press force (main press): 78 t Specific press force: 95 N/cm² Pre-compression flap force: 28 t Feed opening dimensions: 1,500 x 1,100 mm Fill volume per press cycle: 2.7 m³ Dsdpfxjvgrh Uo Afnjcd Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying: 5-fold vertical Hydraulic oil tank capacity: 1,000 L Baler dimensions (assembled with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight (baler) approx. 25 t Note: The machine was used in a recycling operation for compacting paper, cardboard, and films. The baler is in good condition, will remain in operation until January 2025, and can be inspected by prior arrangement. We would be pleased if this machine is of interest to you. Your service team at Mertens & Frowein GmbH

Stanje: rabljeno, Leto izdelave: 2001, Transnorm Conveyor Belt GF 3800-700-600 RA2182 Technical Data: Conveyor length (NL): 3,800 mm Frame width (NB): 700 mm, 800 mm with motor Belt width (GuB): 600 mm Height (BH): 80 mm, 430 mm with motor Support stands: available as an option Conveying speed (v m/s): 0.5 Drive: SEW geared motor, SA37/T DT71D4/TH Electrical data: 50Hz V380-500, kW 0.37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optional equipment: Supports Side guides, single or double-sided Frequency inverter for stepless speed regulation Customizable length (longer/shorter) All prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, expert advice, simply get in touch with us. Contact us by phone or email. We are happy to assist you in planning and implementing your projects. We look forward to hearing from you. Dsdpfoq H T Rrex Afnscd Best regards, Your team from Dr. Sonntag GmbH & Co. KG Your specialist and partner for intralogistics

Stanje: rabljeno, Leto izdelave: 2014, Transnorm Conveyor Belt GF 4900-700-600 RA2185 Technical Data: Conveying length (NL): 4900 mm Frame width (NB): 700 mm; 800 mm including drive unit Belt width (GuB): 600 mm Construction height (BH): 80 mm; 300 mm with drive unit Support legs: available as an option Conveying speed (v m/s): 0.75 Drive: SEW geared motor, R27 DRE90M4/TH Electrical data: 50Hz V380-500, kW 1.1 S1 Drive drum: Ø = 81 mm Return roller: Ø = 81 mm Year of manufacture: 2014 Available options: Support legs Lateral guides (single-sided or double-sided) Frequency converter for stepless speed adjustment Adjustable length (longer/shorter) Prices are net, plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply get in touch with us. Contact us by phone or email. Dcjdsq H T Ryopfx Afnsd We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, The Team at Dr. Sonntag GmbH & Co. KG Your specialist and partner for intralogistics

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, Features: * Used telescopic belt conveyor * Condition: fully functional with signs of use * Ideal for fast material handling * Professionally dismantled and packaged * Colour: Blue * 2 units in stock * Price per unit Technical Data: Manufacturer: Budde Year of manufacture: 09/11 Model: TGF03 Total length: 14,530 mm Conveying length: 14,000 mm Retracted length: 5,000 mm Extended length: 14,000 mm Total width: 1,240 mm (including control cabinet) Width: 990 mm Belt width: 600 mm Condition: good (used) Belt type: smooth Overall height: 750 mm Deadweight: 2,200 kg Includes counterweights at the rear. Dcedpfjd S Hkiox Afned Telescopic Belt Conveyor The telescopic belt conveyor is ideally suited for use in the order picking area to link machines or workstations and optimise internal workflows. During material handling, the telescopic belt conveyor can gently transport containers, boxes, or various packaging units of different sizes to loading or unloading stations, and also serves as a connecting section before or between production and processing machinery. It allows for efficient transport of parts within operations and warehouses, handling significant quantities and distances. Tailored Solutions for Your Intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods, we are your competent partner! We are happy to provide a tailored offer or advise you on planning or assembly questions. Just let us know your requirements and on-site conditions. Benefit from our many years of experience and excellent network of specialists. We have successfully implemented projects for companies from various industries, such as logistics, pharmaceuticals, crafts, and electronics. Together, we will develop solutions to optimise your processes and material flow in a cost-effective and sustainable way. We can also offer fully automated sorting technology or supplementary components such as picking racks or containers.

Stanje: rabljeno, Leto izdelave: 2014, Transnorm Incline Conveyor Downhill Belt Conveyor with Curve GF 2200+1300-700-600 RA2189 Technical Data: Conveyor length (NL): 3500 mm (2200 mm incline belt + 1300 mm curve) Frame width (NB): 700 mm Belt width (GuB): 600 mm Construction height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Support feet: available as an option Conveying speed (v m/s): please contact us Drive: SEW geared motor, SA37/T DT71D4/BMG/TH Electrical data: 50Hz V380-500, kW 0.37 S1 Drive drum: Ø = 81 mm Return roller: Ø = 81 mm Optional extras: - Supports - Side guides (single-sided and double-sided) - Adjustable length (longer/shorter) Prices are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Dcjdpfx Afsq H T Sasnjd For individual, professional advice, simply get in touch with us. Contact us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact partner for intralogistics

Stanje: rabljeno, Leto izdelave: 2014, Transnorm Inclined Belt Conveyor Declining Conveyor with Curve GF 2200+900-700-600 RA2190 Technical Data: Dcodeq H T Sdopfx Afned - Conveyor length (NL): 3100 mm (2200 mm inclined section + 900 mm curve) - Frame width (NB): 700 mm - Belt width (GuB): 600 mm - Construction height (BH): 80 mm, 430 mm with motor - Angle: freely adjustable between 0 and 15° - Support legs: optionally available - Conveyor speed (v m/s): please contact us - Drive: SEW geared motor, SA37/T DT71D4/BMG/TH - Electrical data: 50Hz V380-500, kW 0.37 S1 - Drive drum diameter: Ø = 81 mm - Return roller diameter: Ø = 81 mm Optionally available: - Support stands - Side guides (single-sided or double-sided) - Adjustable length (longer/shorter) All prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, please feel free to contact us. Contact us by phone or email; we are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Leto izdelave: 2003, stanje: delavnici obnovljeno (rabljeno), Stock number: 2651 1 used, partially overhauled in 2023, underwater pelletizing system Throughput up to approx. 450 kg/h depending on material, consisting of: Type BKG (Nordson) Start-up valve with hydraulic unit Granulator type A300 incl. die plate and cutter bar, drive 4.4 kW By-pass system TVE 1000 ED pellet dryer, drive 4 kW incl. Agglomerate catcher Temperature-controlled water system with Water tank 200 liters, installed heating capacity 9 kW Water pump 2.2 kW with 15 m³/h Heat exchanger Control system Further UWG pelletizers available ex works Wuppertal (Gala, BKG Nordson, Econ) Available from stock Wuppertal: Complete compounding and pelletizing lines Dcedpfjiyyf Iex Afned with single-screw or twin-screw extruders.

Stanje: rabljeno, Leto izdelave: 2014, Transnorm Inclined Conveyor, Declining Conveyor, Inclined Belt Conveyor with Curve GF 4600+700-600-500 RA2195 Technical Specifications: Conveying length (NL): 5300 mm (4600 mm inclined conveyor + 700 mm curve) Frame width (NB): 600 mm Dcsdpfx Ajq Imt Usfnjd Belt width (GuB): 700 mm Construction height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Support feet: optionally available Conveying speed (v m/s): Please contact us Drive: SEW geared motor, R40DT80N4BMG Electrical data: 50Hz V380-500, kW 0.75 S1 Drive drum: Ø = 81 mm Return roller: Ø = 81 mm Optionally available: - Supports - Side guides (single-sided and double-sided) - Length adjustment (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, expert consultation, simply get in touch with us. Contact us by phone or email. We are happy to support you with planning and implementing your projects. We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG team Your specialist and contact for intralogistics.

Stanje: rabljeno, Leto izdelave: 1999, Transnorm Belt Conveyor 800-600-500 RA2041 The Transnorm belt conveyor is from 1999 and is in good (used) condition. It is perfectly suited as a feeder belt and features a Van der Graaf brand motor. Supports are not included in the scope of delivery but are available as an option. Technical Specifications: Manufacturer: Transnorm Type: TS 1100 Belt Conveyor Year of manufacture: 1999 Condition: good (used) Motor: fully functional Conveyor length (FL): 800 mm Nominal/outer width (NB): 600 mm Belt width (GB): 500 mm Overall height (BH): 85 mm Motor height (MH): 545 mm Motor type: SEW geared motor Motor power: 0.55 kW 230/400 V 50Hz Conveying speed: 1.02 m/s Weight: 60 kg Scope of delivery: without supports (please inquire if needed) Optional: Supports Side guides Frequency inverter We can also extend the conveyor to your required dimensions. Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Dcedpfxek Au A Uo Afned For individual, professional advice, simply contact us. Get in touch by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and partner for intralogistics

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, We deliver the machines wherever you require, and install them upon request by prior arrangement. Optional: Stainless steel discharge element, stainless steel storage silo, blower, and approximately 3 meters of piping. Grinding mill 800 series, 22 kW or 37 kW 3 x 2 blade set configuration. Bwj3E79Mpn 2 x stators Dodpfxot Iw Huj Afnjcd Screen deck as per your request with Variable Frequency Drive, optional Product discharge and storage available in various configurations at highly competitive prices when combined. Motor power can be adjusted. Other modifications are negotiable, such as rotor adaptations (e.g., 5 rows of blades or heavy-duty version). Delivery/timeframe to be coordinated. Please call or email us to discuss or if you have any questions. Kindly respond with your name, company name, and correct phone number. Without this information, RSS Recycling Shredders and Solutions (Netherlands) will not be able to respond.

Stanje: rabljeno, Leto izdelave: 1998, Transnorm Conveyor Belt GF 15000-600-500 RA2067 Technical Data: Conveying length (NL): 15,000 mm Frame width (NB): 600 mm, 700 mm with motor Belt width (GuB): 500 mm Frame height (BH): 80 mm, 430 mm with motor Support legs: available as an option Conveying speed (v m/s): Please contact us and we will strive to meet your preferred conveying speed Drive: SEW geared motor Electrical data: 50Hz V380-500, kW 1.1 S1 Drive drum: Ø = 81 mm Return roller: Ø = 81 mm Optional equipment available: Support legs Side guides (single or double-sided) Frequency inverter for stepless speed adjustment Length customization (longer/shorter) All prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply get in touch with us. Contact us by phone or email. We are happy to assist you with the planning and implementation of your projects. Djdpfxsn I Uwis Afnscd We look forward to hearing from you. Best regards, Your Dr. Sonntag GmbH & Co. KG Team Your specialist and point of contact for intralogistics

Stanje: rabljeno, Leto izdelave: 2001, Transnorm Conveyor Belt GF 12330-600-500 RA2072 Technical Specifications: Conveyor length (NL): 12,330 mm Frame width (NB): 600 mm, 700 mm with motor Belt width (GuB): 500 mm Construction height (BH): 80 mm, 430 mm with motor Support legs: optionally available Conveying speed (v m/s): 0.25 Drive: SEW gear motor R27 DT80N4 Electrical data: 50Hz V380-500, kW 0.75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Dcsdpfxsn R Uatj Afnjd Optional features: - Support legs - Side guidance (single-sided or double-sided) - Frequency inverter for stepless speed adjustment - Length customization (longer/shorter) Prices are net plus VAT, ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg. For individual, expert advice, simply get in touch with us. Contact us by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Best regards, Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact partner for intralogistics.

Leto izdelave: 2010, stanje: dober (rabljeno), 2 SICON shredders Year: 2010 Electrical cabinet is missing Dodpfx Aeiz Tm Iefnscd Price: €15,000 each 4 densimetric tables: €8,000 each

Stanje: novo, Leto izdelave: 2021, Transnorm Belt Curve Conveyor Left 30°-1270-1100-IR900 – NEW RA2303 Technical Data: Frame width (NB): 1270 mm Frame width with bearing cover: 1390 mm Frame width with bearing lid and gearbox cover: 1480 mm Belt width (GuB): 1100 mm Overall height (BH): 250 mm Djdpfxet D R R Sj Afnscd Height of bottom-mounted motor: 300 mm Motor height (MH): 550 mm Inner radius (IR): 900 mm Conveying angle: 30° degrees Average conveying speed (v m/s): 1.0 m/s Drive: SEW motor with frequency inverter Electrical data: 50Hz V380-500, kW 1.5 / S1 Belt: KT 96 new Year of manufacture: 2021 Side guide height: 194 mm Optionally available: Supports Prices are net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG, 97076 Würzburg. For customized, professional advice, simply get in touch with us. Contact us easily by phone or email. We are happy to assist you with the planning and implementation of your projects. We look forward to hearing from you. Kind regards, The Dr. Sonntag GmbH & Co. KG team – Your specialist and contact for intralogistics.