Transportni trak

MTF Technik GL-LD-120

Stanje: rabljeno, Leto izdelave: 2003, Technical details: Kledpfxou Nw Ezj Af Njl Pressure: 40 t Chamber opening: 1200 x 730 mm Material: Cardboard, plastic – cardboard bottles Voltage: 400 / 50 V / Hz Total power requirement: 16.4 kW Transport dimensions of the machine: 6.5 x 6.2 x 2.7 m Fully automatic hydraulic CHANNEL BALER for recycling with conveyor unit/transport belt (LxW): 4500 x 1000 mm, motor-driven with 3-fold automatic tying unit Bale counter/display Press chamber (LxWxH): 1800 x 800 x 800 mm, volume: 1.2 m³ Bale size (LxWxH): 300 – 1500 x 800 x 800 mm Bale weight: 250 – 450 kg, depending on material and bale length Filling opening (LxW): 1200 x 730 mm; filling height: 1200 mm Hopper size (LxWxH): 1200 x 1200 x 1400 mm; filling height: 2500 mm

Leto izdelave: 2023, Stanje: novo, In the area of 3D thermoforming, we also offer presses, turners, foil carousel storage systems, and brushing machines on Machineseeker! MEMBRANES for membrane presses – made of silicone or natural rubber Top-quality and suitable for all membrane presses (foil and veneer presses). You can purchase our membranes either pre-cut to your required dimensions or as roll stock. SILICONE Type: MS-2 Colour: milky white Surface: fabric-patterned/smooth Standard widths: 1680/2000 mm Polymer base: silicone Shore hardness: 50° Shore Thickness: 3 mm Operating temperature: min. -50°C / max. 200°C SILICONE Type: MS-1 Colour: milky blue Surface: smooth Standard widths: 1600/1800 mm Polymer base: silicone Shore hardness: 45° +/- 3° Shore Thickness: 2 mm Operating temperature: min. -60°C / max. +230°C NATURAL RUBBER Type: MNK-2 Colour: grey Surface: smooth/fabric-patterned Standard widths: 1700–1750 and 2000 mm Rubber: natural rubber Shore hardness: approx. 42° Shore Thickness: 2.5 – 4.0 – 5.0 mm Kjdpfx Aed S Efaef Noll Operating temperature: min. -20°C / max. +130°C NATURAL RUBBER Two-layer version for waterbed/oil presses Type: MNK-2 WB Colour: grey/black Surface: both sides smooth Standard width: 1700 mm Rubber: natural rubber Shore hardness: approx. 42°/60° Shore Thickness: 3.5–4 mm Operating temperature: max. 130°C Standard SILICONE Type RSS Colour: red-brown or transparent (other colours available upon request) Surface: both sides smooth Standard length: cut to size or 10 m rolls (other lengths available on request) Standard width: 1200 mm (up to 1800 mm available on request) Polymer: silicone Shore hardness: 30°–80° Shore Thickness: 0.5–10 mm

Stanje: rabljeno, Leto izdelave: 2004, Kompaktna polavtomatska čelilna spajalna linija, sestavljena iz: - Rezkalnik PJ 150/500 - Prenosne mize za ročni prenos Klodpfjw Nbacsx Af Nsl - Enokanalne stiskalnice PJ 7/6100 li Rezkalnik: 2 paketa/min Stiskalnica: 2 cikla/min Vhodna dolžina: 150 – 700 mm Končna dolžina: maks. 6.100 mm

Stanje: novo, Leto izdelave: 2025, obratovalne ure: 1 h, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, Mercodor shredder ZM 44 with a cutting chamber of 600x380 mm, equipped with a 7.5 kW drive. Knife configuration: 19 mm, 3 hooks. Ksdevupbzepfx Af Nell

Stanje: dober (rabljeno), Transportni trak za odstranjevanje odpadkov za giljotino, trinožni stroj in avtomatski izsekovalni stroj. Proizvedeno v Nemčiji. Delovna širina 52 cm, dolžina transportnega traku pribl. 300 cm. Kledpfx Aowfq T Sof Nol Izmet odpadnega materiala neposredno izpod stroja v zabojnik.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, obratovalne ure: 21.676 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 78 t, širina odprtine za polnjenje: 750 mm, dolžina polnilne odprtine: 1.500 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 25.000 kg, transportna višina: 3.000 mm, kapaciteta rezervoarja za olje: 1.000 l, moč: 55 kW (74,78 KM), lastna masa: 25.000 kg, volumenski pretok: 930 m³/h, obratovalni tlak: 250 letvica, Good day, We are pleased to offer you, on a non-binding basis, a used baler manufactured by Presona AB, model LP 80 VH1. The following technical data has been taken from the manufacturer's operating manual and brochures. We do not assume any liability for their accuracy or completeness. Manufacturer: Presona AB, Sweden Model: LP 80 VH1 Year of manufacture: 2007 Total operating hours: 21,676 hours (as of November 2024) Press force (main press): 78 t Specific press force: 95 N/cm² Pre-compression flap force: 28 t Feed opening dimensions: 1,500 x 1,100 mm Fill volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying: 5-fold vertical Hydraulic oil tank capacity: 1,000 L Baler dimensions (assembled with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight (baler) approx. 25 t Note: The machine was used in a recycling operation for compacting paper, cardboard, and films. The baler is in good condition, will remain in operation until January 2025, and can be inspected by prior arrangement. We would be pleased if this machine is of interest to you. Klodpfsvgrh Ujx Af Nel Your service team at Mertens & Frowein GmbH

Stanje: rabljeno, Leto izdelave: 2019, velikost sprednje pnevmatike: 600/70R34, velikost zadnje pnevmatike: 710/70R42, Oprema: zavorni sistem na stisnjen zrak, Radar sensor, Vario terminal 10.4-inch, roof hatch / VarioGuide Variotronic implement control, VarioGuide / GSM controller, VarioDoc Pro, super comfort seat / Hydraulic pump 152 l/min / / Klsdpfx Aor Ty N Nef Nsl

Stanje: rabljeno, Leto izdelave: 2004, IMAMO 24 TAKIH REZALNIKOV, PRI NAKUPU VEČ KOSOV LAHKO PONUDIMO PAKETNO CENO Tip: EH 400/1 Serijska številka: 901 Leto izdelave: 2004 Napetost/frekvenca: 400 V/50 Hz Nazivna moč: 3 kW CE certifikat: Da 🛠️ Opis naprave Klsdpfxsxapr Hs Af Njl Industrijski rezalnik ali mlin (rezalnik/granulator). Vidne lastnosti na slikah: Sistem z vrtečimi rezili (rezalna enota) na 2 mm osi 3 kW SEW motor z reduktorjem 8 mm sito (označeno kot ‘8 mm sito’) – določa velikost izhodnih delcev Mobilna in transportna zasnova Kontejner za izpust materiala in spodnji motorni sistem Stroji te vrste se običajno uporabljajo za drobljenje naslednjih materialov: Plastika Guma Les Ostružki lahkih kovin Elektronski odpadki

Stanje: rabljeno, Adhesive application Glue application Adhesive application - Glue application specified for package heights up to 300 mm via 1 application roller - Drive via 0.37 kW worm gear motor - 1 pc left - 1 pc right - suitable for DIMTER HK 200 and HK 400 Dimter spare parts Kodpfx Afocht Nye Nsll Dimter accessories

Stanje: novo, Table length: 2,200 mm Table width: 1,500 mm Lifting height: 1,850 mm Load capacity: 2,000 kg Ksdpfx Ajupxwkef Nell Minimum lifting height: 260 mm Total power requirement: 1.5 kW Lifting speed – upwards unloaded: 40 sec Lifting speed – downwards unloaded: 30 sec Connection voltage: 400 V Machine weight approx. 0.45 t Space requirement approx. 2.2 x 1.5 x 0.26 m The hydraulic lift tables are electrically powered and operated. Equipped with a contact strip for safe lowering operation. Highly versatile – suitable for workshops, assembly departments, loading bays, and more.