Transportni trak, L: 7.120 mm

S-Serv 1000003853, FB: 800 mm

Leto izdelave: 2003, Stanje: delavnici obnovljeno (rabljeno), Stock number: 2651 1 used, partially overhauled in 2023, underwater pelletizing system Throughput up to approx. 450 kg/h depending on material, consisting of: Type BKG (Nordson) Start-up valve with hydraulic unit Granulator type A300 incl. die plate and cutter bar, drive 4.4 kW By-pass system TVE 1000 ED pellet dryer, drive 4 kW incl. Agglomerate catcher Temperature-controlled water system with Water tank 200 liters, installed heating capacity 9 kW Water pump 2.2 kW with 15 m³/h Heat exchanger Control system Further UWG pelletizers available ex works Wuppertal (Gala, BKG Nordson, Econ) Hjdpjiyyf Ijfx Abhoh Available from stock Wuppertal: Complete compounding and pelletizing lines with single-screw or twin-screw extruders.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, obratovalne ure: 21.676 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 78 t, širina odprtine za polnjenje: 750 mm, dolžina polnilne odprtine: 1.500 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 25.000 kg, transportna višina: 3.000 mm, kapaciteta rezervoarja za olje: 1.000 l, moč: 55 kW (74,78 KM), lastna masa: 25.000 kg, volumenski pretok: 930 m³/h, obratovalni tlak: 250 letvica, Good day, Hjdpfxsvgrh Uj Abheh We are pleased to offer you, on a non-binding basis, a used baler manufactured by Presona AB, model LP 80 VH1. The following technical data has been taken from the manufacturer's operating manual and brochures. We do not assume any liability for their accuracy or completeness. Manufacturer: Presona AB, Sweden Model: LP 80 VH1 Year of manufacture: 2007 Total operating hours: 21,676 hours (as of November 2024) Press force (main press): 78 t Specific press force: 95 N/cm² Pre-compression flap force: 28 t Feed opening dimensions: 1,500 x 1,100 mm Fill volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying: 5-fold vertical Hydraulic oil tank capacity: 1,000 L Baler dimensions (assembled with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight (baler) approx. 25 t Note: The machine was used in a recycling operation for compacting paper, cardboard, and films. The baler is in good condition, will remain in operation until January 2025, and can be inspected by prior arrangement. We would be pleased if this machine is of interest to you. Your service team at Mertens & Frowein GmbH

Leto izdelave: 2025, Stanje: rabljeno, New: Yes Color: Grey Hedpfowvmkzex Abheh Load compartment capacity: 10,000 l

Leto izdelave: 2010, Stanje: dober (rabljeno), 2 SICON shredders Year: 2010 Electrical cabinet is missing Price: €15,000 each Hodpsiz Tm Isfx Abhjh 4 densimetric tables: €8,000 each

Stanje: novo, €1,690 + 22% Italian VAT. A net invoice will be issued for customers with a valid VAT identification number. ----- The Brugger Power Split S14 is a powerful vertical log splitter offering an impressive splitting force of 14 tons. This robust machine is ideally suited for a wide range of applications and offers maximum flexibility in drive options – either via the 3.7 kW electric motor or PTO shaft. Key Features: - 14-ton splitting force - Combination drive: 3.7 kW electric motor & PTO drive - Weight: 250 kg - Split length up to 110 cm - Log lifter The delivery includes a log lifter which facilitates handling of heavy timber. Optionally, a hydraulic winch is available, providing added versatility and simplifying operation even further. With a maximum split length of 110 cm, the Brugger Power Split S14 offers the flexibility to process even larger logs with ease. A support table for shorter wood is also included. The Brugger Power Split S14 is the ideal choice for anyone seeking a reliable and high-performance wood splitting solution – whether for professional or private use. Prices + VAT: - Power Split S14 = €1,690 - Power Split S22 = €2,670 - Power Split S30 = €2,960 Accessories: Hsdpfx Aexn Iq Rsbhjh - Support table for short logs = €125 - 4-way splitting wedge = €99 - Hydraulic winch = €595 ----- Contact us for your customised offer!

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, moč: 4 kW (5,44 KM), vrsta goriva: električni, barva: srebrn, skupna masa: 2.460 kg, tip droga: teleskopski, Leto izdelave: 2022, obratovalne ure: 21 h, številka stroja/vozila: 0943, Small, compact, and maneuverable: these are the key advantages of our 2.5-ton electric mobile crane. Yet, there’s no question that it also handles “big” jobs, delivering impressive performance with a maximum lifting capacity of 2,500 kilograms. The 2.5-ton electric mobile crane is equipped as standard with non-marking tires that do not chalk. The crane’s 2 kW electric motor offers precise control and, thanks to a powerful 24 V, 420 Ah battery, operates for 8 hours without the need for recharging. The boom is proportionally extendable and can be further lengthened with an optional jib extension. JMG MC 25S - Lifting capacity: 2,500 kg - Net weight: 2,460 kg - Width: 900 mm - Height: 1,600 mm - Drive: Electric - Power: 4 kW - Tires: Solideal Magnum - Hydraulic winch - Telescopic boom Hsdpew S Ii Nefx Abhjh - Counterweights - Battery: 24 V 420 Ah - Automatic braking system - Front-wheel drive – 2 gears - Radio remote control - Manual boom extension - Electronic load monitoring - Boom angle: +60° / -15° - Ground clearance: 70 mm - Front tires: 18 x 7-8 - Rear tires: 15 x 4.5-8 - Operating manual - Electric motors – insulation class H

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, vrsta goriva: električni, skupna masa: 2.500 kg, največja dovoljena obremenitev: 2.500 kg, tip droga: teleskopski, Self-propelled battery-powered crane by renowned Italian manufacturer JMG, model MC25S with radio remote control and a lifting capacity of 2,500 kg. Brand new machine, available for inspection. Distributor, 12-month warranty. CRANE CLASSIFICATION ACCORDING TO UNI ISO 4301-1: A3 EUROPEAN DIRECTIVES: 2006/42/EC (Machinery Directive) 2004/108/EC (EMC) 2006/95/EC (Low Voltage Directive) 2000/14/EC and subsequent amendments. REFERENCE STANDARDS: EN 13000:2010 UNI ISO 4301-2:2011 and subsequent amendments. DRIVE SYSTEM: Electric BOOM DRIVE: Hydraulic POWER SUPPLY: Electric battery MAXIMUM LIFTING CAPACITY: 2,500 kg CRANE WEIGHT: 2,500 kg BOOM ANGLE UP: 60° BOOM ANGLE DOWN: -15° FRAME: Designed and manufactured by JMG. Box-type, torsion-resistant structure made from high-strength structural steel. BOOM: Made from high-quality steel plate, formed and welded. Consists of a base unit, hydraulic telescopic system and one mechanical extension. Boom elevation and extension are hydraulically operated using telescopic cylinders. TRAVEL MOTOR: 2 electric motors, 2 kW, 24V AC, insulation class H. PUMP MOTOR: Electric motor 3 kW, 24V DC, insulation class H. DRIVE: Electronic speed control, MOSFET type. BATTERY: 24 V 420 Ah, with charge indicator. DRIVE TRANSMISSION: Front axle driven by two gearboxes. WHEELS: Front: superelastic, 18x7-8", 2 pcs. Rear: superelastic, 15x4 1/2 -8", 2 pcs. BRAKES: Automatic on front wheels. STEERING: Rear axle steering via electric motor. Max. steering angle ± 90°. CONTROL: Operated via radio remote control. HYDRAULIC SYSTEM: Powered by a low-noise 3 kW gear pump. Cylinders operated by an electro-proportional distributor controllable via radio remote. Equipped with a filter and safety valve. Max. working pressure 22 MPa. SAFETY FEATURES: Electronic load moment indicator and limiter. STANDARD EQUIPMENT: • Max. lifting capacity 2.5 t • Front wheel drive via two gearboxes (one per wheel) • Hydraulically telescoping boom (1 fixed section, 2 telescopic sections) • Manual mechanical boom extension • 24 V 420 Ah battery pack • Stationary battery charger • Work lights • Warning beacon • Fire extinguisher • Radio remote control for boom and travel Hjdpfowtppzox Abhsh • Electronic load indicator and limiter compliant with CE standards • Boom inclination +60° / -15° • CE conformity declaration • Operation manual, technical documentation, declarations INSTALLED OPTIONAL EQUIPMENT: • 2.5 t hydraulic winch • Non-marking tires • Battery water refilling system • On-board mobile charger • Manual three-position jib (1.0 t)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Emne: AV-12021-AV12022 – Vertikal tank 23.800L Udvendige mål: Diameter Ø mm, Total højde 7200 mm. Cylinderhøjde 5900 mm, Benhøjde 800 mm. Hjdpjq Dafhofx Abhoh Vertikale rustfri ståltanke – 2 stk. Isoleret med kappe. Sidemonteret omrører. Konisk bund med Ø63 mm udløb. Konisk top med CIP-system og tryk-/vakuumventil. Årgang 2000. Fabrikant: Randers Rustfri Stålindustri A/S. 2 stk. identiske! AISI 304.

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, premer rotorja: 400 mm, dolžina rotorja: 1.000 mm, moč: 37 kW (50,31 KM), največja hitrost vrtenja: 100 obr/min, delovna širina: 1.000 mm, Single-shaft shredder OVERHAULED Rotor diameter: 400 mm Working width: 1,000 mm Drive: 37 kW Hydraulics: 1.5 kW Hsdpfx Aovnl Uksbhoh Rotor knives: 48 pcs Stator knives: 4 pcs – adjustable

Stanje: rabljeno, Leto izdelave: 2013, obratovalne ure: 8.682 h, moč: 164 kW (222,98 KM), vrsta prenosa: drugo, največja hitrost: 80 km/h, prva registracija: 04/2013, barva: oranžna, skupna masa: 14.000 kg, prevoženi kilometri: 159.883 km, lastna masa: 8.293 kg, največja dovoljena obremenitev: 5.707 kg, konfiguracija osi: 4x4, vzmetenje: jeklo, število sedežev: 2, voznikova kabina: dnevna kabina, medosna razdalja: 3.000 mm, zavore: drugo, emisijski razred: noben, Oprema: ABS, dodatne luči, kabina, klimatska naprava, nadzor oprijema, pogon na vsa štiri kolesa, računalnik na krovu, servovolan, spojka prikolice, sprednja priključna naprava, sprednji priključni vrat, zapora diferenciala, zavorni sistem na stisnjen zrak, čelni nakladalnik, * German vehicle * Single owner * Condition as per photos * Only 8,682 original operating hours * Front and rear PTO * Municipal hydraulics front and rear * Front mower * Mulag MRS300 boom mower * Mulag RMK1200 verge mowing head * Rear mower * Mulag MHS800 rear boom mower * with Mulag MK1200 mowing head * Municipal hydraulics & rear hydraulics * Rear three-point hitch * Mulag verge mower MRS 300 * Ideal for mowing roadsides to the left and right * 3-point attachment to front lift * Range up to 3.00 m * Driven via front PTO * Electro-hydraulic control * Mower head floatation * Road-speed dependent contour following * Verge mowing head RMK 1200 * Working width 1,200 mm * Telescopic rear boom mower MHS 800 * Lateral shift 1,600 mm * Reach left and right 8.70 m * Automatic terrain following Hjdpevhqbcefx Abhoh * High clearance frame for driving over obstacles up to 3.90 m * One-hand multifunction joystick control * Quick-change attachment * Mulag flail mowing head MK 1200 * Overall width 1,580 mm * Boom utilization indicator * Comfort cab with 2 seats * Air conditioning * Heated front windscreen * Outside temperature display * Comfort driver's air-suspension seat * Electrically adjustable heated mirrors * JCB PowerShift transmission, three-speed powershift * Disc brakes * ABS * Differential lock * Beacon lights * Wide-angle warning beacons * Work lights * 4x4 all-wheel drive * Tyres: 495/70R24 * Maximum speed: 80 km/h * LOF registered agricultural tractor * Wheelbase: 3,000 mm * GVWR: 12,000 kg * LOF registration * For sales to businesses and export (EU and non-EU), German merchant terms apply. If a new vehicle inspection (TÜV) is required, we will gladly provide an offer from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, DGUV, roadworthiness inspection (SP), or UVV. Find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspection of the goods to avoid any misconceptions about their condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged. All details provided without guarantee. We accept no liability for errors or inaccuracies in the offer. The buyer is obliged to independently verify the condition and specifications of the goods/vehicles. Subject to change, prior sale, and error.