Dorn upogibni stroj Transfluid DB 2060 S

Transfluid DB 2060 S

Leto izdelave: 2010, Stanje: zelo dobro (rabljeno), MULTIVAC T-800 ID št.: 2569 Multivac T-800 pladnjevi varilni stroj z vakuumom/plinom z 2 kompletnima orodjema, vozičkom za orodje, vakuumsko črpalko, dozirnikom pladnjev Carsö itd. Letnik 2010, v zelo dobrem stanju! Gtjdpfx Adspcda Roxjt Orodje: 215 x 167 mm št. 2 in 236 x 186 mm. Dimenzije linije: 800 x 100 x V 200 cm.

Leto izdelave: 2021, Stanje: pripravljen za uporabo (rabljen), There are 20 identical welding machines available. Type: cool41 U31, Standard: IEC 60974-1, -2, -10 C.L.A, Mains voltage: 400V, Frequency: 50/60Hz, Protection class: IP23, Power consumption P min: 0.9kW, Cooling capacity P max: 0.35MPa (3.5bar), Max. current consumption: 2.5A, Length: 539mm, Width: 210mm, Height: 415mm, Weight: 22kg. Control: Comfort 2.0, with intuitive operation via click wheel, infinitely variable pulse/spot/standard modes (especially useful for TIG welding), adjustable pulse break ratio (balance), e.g. from 10-90%, Hz and kHz pulsing up to approx. 15kHz, ActivArc technology: dynamic arc regulation to ensure consistent performance during stick-out variations and to prevent electrode sticking; improved root and penetration characteristics, spotArc/Spotmatic functions for spot welding and tacking, 2-stroke/4-stroke modes selectable via torch trigger, integrated MMA welding (often with MMA-pulse automation), adjustable gas pre-flow and post-flow times, adjustable upslope/downslope times, torch modes controllable via torch trigger (e.g. reduced secondary current, etc.), memory/JOB storage: recurring welding tasks can be saved (depending on version, approx. 8-100 JOBs), energy efficiency: high efficiency, standby function available. Remote control & interfaces: Remote adjusters and function torches can be connected, optional LAN/WiFi gateway (ewm Xnet), PC interfaces for parameter setting and monitoring. Gtedoxdc Upepfx Adxst Very little used, inspection on site possible.

Stanje: dober (rabljeno), Leto izdelave: 1999, Deli, prikazani z roko, niso vključeni. Gtsdpfx Adswbz Tusxot

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, Showroom machine from the manufacturer! Ideal for collating calendars, folded sections, all types of cartons, packaging, … Calendar Collating Machine Type: MKW RAPID UT – Rotary Table Machine 16 – Number of Stations B3 – Format 35 cm x 50 cm GS – Large Stack, max. 70 cm loading height 1 Collating Automatic Type MKW RAPID UT / B3 / GS - With 16 stations in rotary table execution - Format up to 35 x 50 cm Gtodpfx Adsur Ih Rexjt - Large stack with max. 70 cm stack height - Paper weights up to approx. 1,000 g/m² - Single sheets, folded sections, cardboard, plastic films, ... - Toothed belt conveyor table for continuous paper transport - Radially adjustable toothed belt table for precise sheet placement - Radial adjustment of toothed belts via electric clutches - Foldable transport lugs - Adjustable tilting suction heads for optimal paper pick-up - Pressure-vacuum generator in soundproofed housing - Timed blast air for precise sheet placement - Electronic machine control via industrial PC - High-quality 15" color display for safe and clear operator guidance - Automatic misfeed and double sheet detection at each station - Misfeed and double sheet detection with IR sensor - Tandem function for double use 2:1 (TANDEM mode) - Dynamic station selection for optimized job pre-loading - Insert change function at any station - Carton change function at any station - Speed display with stepless adjustment - Preselection counter with intermediate stop for set quantity and stop time - Delivery control for offset stacking with adjustable set interval - Transport table lighting with LED lamp - Jam control above the conveyor table - Ejection station including empty station at delivery AW 3 incl. (for ejecting faulty sets) - Lift control on delivery rollers AHB incl. (for different formats per set and folded sheets) - Integrated delivery jogger system, incl. delivery jogger ASS i 3 incl. (for normal and offset stacking) - LED signal band for visualization of station status SOFU-HIVIS incl. (enables easy status recognition) Alternative to delivery jogger / stacker 1 High-Stack Delivery Type MKW RAPID HA 350-UT / PN + T-BAND - Open format up to 35 x 50 cm - High-stack delivery up to max. 30 cm stack capacity - Delivery with offset function - Pneumatic control of offset function - Stack function adjustable: straight stacking or offset function - Counting function adjustable: offset after preset quantity - Automatic lowering and transport to buffer section - Controlled conveyor belt as buffer section, approx. 2.00 m Warranty Period from delivery of the machines 12 months manufacturer warranty for multi-shift operation (excluding wear parts such as rollers, rubber parts, belts, suction heads, conveyor rollers) Spare Parts Package Extensive spare parts package of all important wear parts included in the scope of supply Offer Validity Subject to prior sale Detailed offer on request

Stanje: novo, Bending capacity: 6.0 mm Working length: 3100 mm Material thickness: 8.0 mm Total power requirement: 11.0 kW Weight approx.: 6.7 t Dimensions (LxWxH): 4,88 x 1,16 x 1,18 m Image similar Bending performance: 8.0 mm » at 3x top roll diameter. Pre-bending: 6.0 mm » at 1.5x top roll diameter. Top roll diameter: 230 mm Lower roll diameter: 210 mm Side roll diameter: 190 mm Max. opening: 30 mm Working height: 825 mm • Fully hydraulic drive of the top and bottom rolls via planetary gearboxes • Digital display for side roll positions • Hydraulic drop-end bearing • Cone bending device • Hardened rolls • Hydraulic adjustment of the side rolls, synchronized via PLC • Hydraulic adjustment of the lower roll via torsion shaft • Pressure-adjustable lower roll • Electric and hydraulic overload protection • Movable control panel • Operating manual in GERMAN and ENGLISH • Machine and equipment in compliance with CE regulations Gsded Ab H Hopfx Adxott Catalog, see the following link: Important points for cone rolling: • The max. sheet thickness is 50% of the nominal capacity • Cone length must be a max. of 30% or more than 60% of the roll length • Hardened rolls are recommended

Stanje: rabljeno, globina grla: 610 mm, 12 avtomatskih kompletov orodij Gedpfx Adoxfi Npoxett Preša sila (72 kN) z dosegom 610 mm Avtomatski menjalnik spodnjih orodij s 4 postajami 2 transportna trakova Zanesljiv in energijsko učinkovit zaradi popolnoma hidravličnega sistema Standardno opremljen s patentiranim varnostnim sistemom Napredno upravljanje z zaslonom na dotik in avtomatskim nadzorom dolžine vstavljenega pritrdilca Opremljen z 2 * modularnima podajalnima sistemoma MAS-9 za Haeger 824OT (72 kN)

Stanje: novo, Leto izdelave: 2024, == Demonstration Machine == ALZMETALL Column Drilling Machine ALZSTAR 40 SV with coolant system B (Option 25) (consisting of separate tank (33 l), pump with motor protection switch, complete fittings) and LED machine lamp Standard equipment: Mushroom emergency stop, reversing switch (for right and left rotation), motor protection switch Gsdpfsd Hy Elox Adxjtt Stepless speed adjustment, digital speed display, feed overload protection, protection class IP54, plug connector spindle guard with electrical interlock Technical specifications: Drilling capacity steel E335 (St 60): 40 mm Thread cutting: Steel E335 (St 60): M 24 Cast iron EN-GJL-200 (GG20): M 30 Short taper: MK 3 Spindle stroke: 120 mm Reach: 293 mm Column diameter: 115 mm Machine table, usable area: 514 x 360 mm T-slots, number x width x spacing: 2 x 14 x 224 mm Distance spindle–table min./max.: 117/701 mm Feed: 0.10 + 0.20 mm/rev Machine height excl. options approx.: 1840 mm Net weight approx.: 285 kg Drive: stepless Motor: 1500 / 3000 rpm Power: 1.45 / 1.9 kW Spindle speed: 160–2250 rpm

Stanje: novo, Capaciteit, Ø mm ----- 57 x 2 Radius, min/max ----- 20/250 Radiussverschil ----- 50/230 Buigsnelheid/herhaalnauwkeurigheid ----- 230º/s. ±0,05° Doo rstanglengte ----- 1.000–∞ Gewicht ----- 5.000 kg Machineafmetingen ----- 3,0 x 1,6 x 1,5 m Buisrotatie ----- 0–360°/sec Lengte-invoer ----- 0–1.800 mm/sec Tolerantiegraad ----- 0,05°/mm Standaardcomponenten voldoen aan VDMA-, ISO- en DIN-normen Gtodpfx Adjga T E Ajxst OPTIES * Online koppeling met CAD-systeem en meetmachine * Automatisch buismagazijn met vrij programmeerbare robot of laadarm * Lasonderzoek en buispositionering elektomagnetische of optische detectie * Vrije radiusbuiging * Simulatie/Botsingscontrole * Verlenging van de bedlengte

Stanje: rabljeno, Leto izdelave: 2016, Overview This weighing and packaging line was built in 2016 by the Spanish manufacturer Volpak. The line is fully equipped, in very good technical condition, and shows only minimal signs of use. The system is still installed and connected, and therefore can be inspected in person at any time. Technical Data - Capacity: 60 bags/minute - Doypack/Flat pouch formats: 20/25g, 50g, 300g, 500g, 750g - Capability for micro-dosing of powders - Modern wide zipper/conveyor Scope of Supply Gsdpstz H T Djfx Adxott - Doypack packaging machine | Volpak | SI-280 F1 - Multihead weigher | Ishida | CCW-RV-228-S/05-SS - 4 raw material discharge stations - Lindor mixer - Cox & Plant dosing units between the discharge stations, the mixer, and the multihead weigher - Ishida X-ray inspection system with reject unit, IX-GA-4075 - Ishida dynamic checkweigher with DACS-G-S0 reject unit - System for nitrogen or other inert gas injection, including measurement system - Dust extraction system - Euro-slot - Smooth sealing system

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Machine condition is excellent, having completed only 123,000 cycles. CNC-controlled automatic machine designed for processing welded frames. Independent drive and control system. Multiple operations performed within the same cycle time Operates in conjunction with a welding and cleaning line Does not require additional shop floor space Can be adapted for operation in a sash line All processing operations are performed during the cooling phase: Gtjdpfem Ak R Uex Adxst - Drainage - Ventilation grooves - Ventilation bores in colored profiles - Drilling of frame for mullion connector - Hinge drillings in the frame (x6) The center is equipped with its own transfer system for moving frames from the welder to the cleaner SPS, NC control User-friendly visualization interface