Stroj za površinsko brušenje

Reform AR41 Type 7

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 193 34-41, potovalna razdalja osi X: 1.600 mm, pomik osi Y: 1.250 mm, pomik po osi Z: 1.600 mm, obremenitev mize: 2.500 kg, premer vretena: 102 mm, hitrost vretena (min.): 4 obr/min, največja hitrost vretena: 1.600 obr/min, skupna višina: 3.500 mm, skupna dolžina: 6.500 mm, skupna širina: 4.700 mm, dolžina mize: 1.400 mm, širina mize: 1.250 mm, leto zadnje generalne obnove: 2025, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Stroj bol v roku 2025 repasovaný a modernizovaný, je okamžite pripravený na použitie! Pojazdy: - Priečny pojazd stola (os X): 1600 mm - Pohyb vretenovej hlavy (os Y): 1250 mm - Pozdĺžny pojazd stola (os Z): 1475 mm (obmedzenie v dôsledku veľkého stola) - Pohyb vretena (os W): 710 mm - Otoč stola (os B): 360 stupňov Nwjdpfx Aew Rn R Rodyob Upínací stôl: - Upínacia plocha: 1250 x 1400 mm - Zaťaženie stola: 2,5 t Vŕtacie vreteno: - Priemer: 102 mm - Upínanie nástroja: DIN2080 50 SK - Plynulá regulácia otáčok: 4 - 1600 ot/min - Výkon pohonu: 13 kW Posuvy: - Osi X, Y, Z, plynule: 1 - 4000 mm/min Rýchloposuv: - Osi X, Y, Z: 4 m/min Pripojovací výkon: 42 kW Hmotnosť: 10 t Potrebný priestor (D x Š x V): 6,5 x 4,7 x 3,5 m Vybavenie: - Heidenhain TNC 320 - Zariadenie na chladenie

Stanje: rabljeno, Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: C4652, dolžina brušenja: 5.100 mm, širina brušenja: 250 mm, skupna masa: 9.100 kg, potrebna višina: 2.300 mm, zahteva za prostor dolžina: 9.000 mm, potrebna širina: 4.000 mm, Reform AR 51 Type 7 Surface Grinding Machine Year of manufacture: 1990 Grinding length: 5100 mm Grinding width: 250 mm Workpiece height: 220 mm Total power requirement: 36 kW Nwedotqtk Aopfx Adyjb Used water treatment system Overlift station, magnetic roller, pump

Stanje: dober (rabljeno), Leto izdelave: 2004, Clamping knife head type (max.) 460 mm Knife head weight (max.) 150 kg Mounting plate diameter for knife heads (Ø) 360 mm Mounting taper for knife heads nominal diameter Ø 58.227 mm Travel path - z axis 200 mm Chart recording magnification ±10 - ±500 µm Machine weight approx. 2.3 t Space requirement approx. 2 x 1.5 x 2.03 m In the manufacturing process for spiral bevel gears, the quality of the gear manufacturing tools used plays a decisive role. Especially in dry milling, high gear quality and long tool life can only be achieved through precisely adjusted knife heads. The Oerlikon Knife Head Setting and Testing Device CS 200 enables quick and easy adjustment of individual blades, checks their position, and documents the measurement results. The measurement process on the CNC-controlled testing device is semi-automated: all actions required to perform the process are shown on the display for operator guidance. The positioning of the individual knives in the knife head, as well as setting the height of the knife tips, is largely automatic thanks to a special procedure, and is simultaneously documented via a run-out diagram. A subsequent measuring process checks the radial position Nodpsul Efmefx Adyjwb of both the internal and external cutting edges of all knives in the knife head. If individual inspection parameters on the knives do not meet the tolerance requirements, these can be adjusted individually. Thanks to the combination of a semi-automated adjustment process, operator-guided setup actions, and automatic measuring processes, knife heads can be set quickly, conveniently, and with high precision. Operator-guided adjustment and inspection process: - Graphical display of the knife head design as well as measurement results with tolerance verification - Instructions for the operator in plain text (no coded information) - Simple allocation of measurement results to individual knives - Documentation of setup and measurement results via printer - Adjustment and inspection process suitable for stick blade heads of types ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® - Interface for neutral data

Stanje: rabljeno, Leto izdelave: 1961, Ram weight: 750 kg Ram stroke: 660 mm Blow rate: 100 /min Blow energy: 2040 kJ Distance under bolster / lower edge of ram guide: 6600 mm Reach: 750 mm Steel forging – rectangular up to 240 mm Nedpfxjvuullj Adyowb Steel forging – diameter up to 270 mm Drive power: 75.0 kW Hammer weight: 16.5 t Anvil weight: 15.5 t Total weight: 32.0 t Space requirement (W x D x H): 3.2 x 1.45 x 3.45 m Forging hammer Operating principle: pneumatic Can only be offered in our warehouse without commissioning – video from the seller available before disassembly.

Stanje: rabljeno, Leto izdelave: 2016, Overview This weighing and packaging line was built in 2016 by the Spanish manufacturer Volpak. The line is fully equipped, in very good technical condition, and shows only minimal signs of use. The system is still installed and connected, and therefore can be inspected in person at any time. Technical Data - Capacity: 60 bags/minute - Doypack/Flat pouch formats: 20/25g, 50g, 300g, 500g, 750g - Capability for micro-dosing of powders - Modern wide zipper/conveyor Scope of Supply - Doypack packaging machine | Volpak | SI-280 F1 Nodpfetz H T Dsx Adyjwb - Multihead weigher | Ishida | CCW-RV-228-S/05-SS - 4 raw material discharge stations - Lindor mixer - Cox & Plant dosing units between the discharge stations, the mixer, and the multihead weigher - Ishida X-ray inspection system with reject unit, IX-GA-4075 - Ishida dynamic checkweigher with DACS-G-S0 reject unit - System for nitrogen or other inert gas injection, including measurement system - Dust extraction system - Euro-slot - Smooth sealing system

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Machine condition is excellent, having completed only 123,000 cycles. CNC-controlled automatic machine designed for processing welded frames. Independent drive and control system. Multiple operations performed within the same cycle time Operates in conjunction with a welding and cleaning line Nwedpjm Ak R Ujfx Adyeb Does not require additional shop floor space Can be adapted for operation in a sash line All processing operations are performed during the cooling phase: - Drainage - Ventilation grooves - Ventilation bores in colored profiles - Drilling of frame for mullion connector - Hinge drillings in the frame (x6) The center is equipped with its own transfer system for moving frames from the welder to the cleaner SPS, NC control User-friendly visualization interface

Stanje: zelo dobro (rabljeno), Grinding length 1000 mm Nwsdpfxek Abxxj Adyob Grinding diameter ø 350 mm In very good condition.

Stanje: rabljeno, Technical Details: Grinding length: 12,000 mm Grinding width: 2,800 mm Workpiece height: 2,510 mm Max. workpiece weight: 24,000 kg Table area: 11,990 x 2,500 mm Clearance between columns: 2,820 mm Crossbeam adjustment: 2,510 mm Table feed: 1 - 40 m/min Total power requirement: 110 kW Approx. machine weight: 151 t Approx. space required: 32.5 x 9 x 6.73 m The machine is in very good condition and suitable for grinding with the highest precision! In 2022, mechanical components were refurbished by WALDRICH COBURG for approx. EUR 600,000. Nedpfxjwc A Sne Adyowb Equipped with SIEMENS 840 D CNC control 1 universal grinding support, 22 kW Swiveling grinding spindle +/- 110° Peripheral grinding wheel dimension: Ø 700 x 130 mm Vertical adjustment: 1,000 mm with dressing device 1 peripheral grinding support, 30 kW Grinding wheel dimension: Ø 600 x 150 mm Vertical adjustment: 230 mm with dressing device Coolant and filter unit Various grinding wheel mounts

Stanje: dober (rabljeno), Used radial drill SASS Mod. TRM 2200 Excellent condition, fully operational. Supplied with cube block. Maximum drilling diameter in solid cast iron: 20-22, 100 mm Maximum drilling diameter in solid steel (R=60): 80 mm Spindle diameter (sliding quill): 102 mm Spindle Morse taper: 6 Vertical spindle travel: 500 mm Number of spindle speeds: 32 Spindle speed range with 50 Hz motor (rpm): 18–1600 Automatic feed Maximum swing (distance from column surface to spindle axis): 2230 mm Nwsdpfx Aoikqz Ssdyjb Drilling radius (min – max): 660–2505 mm Head travel on arm: 1845 mm Vertical arm travel: 1040 mm Column diameter: 550 mm Column height with motor: 3720 mm Base plate height: 260 mm Base table dimensions: 2490 x 1230 mm Spindle motor power: 11 HP Weight: 9000 kg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1994, stiskalna sila: 80 t, Oprema: varnostna svetlobna zapora, Manufacturer: Amada Model: ITS 80-25 Year of manufacture: 1994 Pressing force: 80 t Bending length: 2500 mm Throat depth: 400 mm Stroke: 100 mm Power: 9.5 kW Dimensions (LxWxH): 3010 x 2230 x 2230 mm Njdpfxjvncifo Adyowb Weight: 4950 kg