Električni 3 -kolesni viličar

Toyota 8 FBE 16 T, Akku überh.!

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2018, obratovalne ure: 1.620 h, nosilnost: 1.600 kg, dvižna višina: 3.300 mm, prosto dvigovanje: 1.300 mm, vrsta goriva: električni, tip droga: dupleks, gradbena višina: 2.180 mm, dolžina vilic: 1.200 mm, lastna masa: 3.300 kg, skupna dolžina: 2.000 mm, vrsta pogona: Elektro, gradbena širina: 1.060 mm, Električni 3-kolesni viličar Težišče tovora: 500 mm Kedpfx Asykvx Aob Aodl ISO razred: ISO razred 2 = 1.000 - 2.500 kg Tip droga: Duplex Tehnično stanje: zelo dobro Sprednja pnevmatika tip: superelastik Stanje sprednjih pnevmatik: 100% Zadnja pnevmatika tip: superelastik Stanje zadnjih pnevmatik: 100% Napetost baterije: 48V Kapaciteta baterije: 750Ah Proizvajalec baterije: tovarniško obnovljena leta 2025 Letnik baterije: 2025 Opis: Tovarniško obnovljena rabljena naprava Toyota, vključno z novim servisom in novim prevzemom v skladu s FEM (bivši UVV). Bočni pomik, 3. ventil, 4. ventil, zadnja delovna luč, sprednja delovna luč, strešna zaščita, vetrobransko steklo, impulzni nadzor, poln prosti dvig, CE certifikat, varnostna luč,

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, obratovalne ure: 158 h, doseg roke: 1.300 mm, Pozdravljeni, Kdsdpfx Abop E T N As Ael prodajamo demonstracijskega robota UR10e, ki je bil uporabljen za konceptno študijo, katero pa smo kasneje opustili.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2018, obratovalne ure: 2.290 h, nosilnost: 1.600 kg, dvižna višina: 4.700 mm, prosto dvigovanje: 1.400 mm, vrsta goriva: električni, tip droga: triplex, gradbena višina: 2.150 mm, dolžina vilic: 1.200 mm, lastna masa: 3.510 kg, skupna dolžina: 2.000 mm, vrsta pogona: Elektro, gradbena širina: 1.060 mm, Električni 3-kolesni viličar Težišče: 500 Kdodjykvxpjpfx Ab Ajl ISO razred: ISO razred 2 = 1.000 - 2.500 kg Tip droga: Triplex Tehnično stanje: zelo dobro Tip sprednjih gum: Superelastične Stanje sprednjih gum: 100 % Tip zadnjih gum: Superelastične Stanje zadnjih gum: 100 % Napetost baterije: 48V Kapaciteta baterije: 750Ah Proizvajalec baterije: Tovarniško obnovljena leta 2026 Leto izdelave baterije: 2026 Opis: Tovarniško obnovljena rabljena naprava Toyota, vključno z novim pregledom in prevzemom po FEM (ex UVV). Stranski pomik, 3. ventil, 4. ventil, delovne luči spredaj, strešna zaščita, vetrobransko steklo, impulzni upravljalnik, popoln prosti dvig, CE certifikat,

Stanje: novo, Pressure: 25 t Ksdpfxsb U Hwps Ab Ajdl Throat depth: 200 mm Stroke: 4 - 80 mm Table surface: 520 x 400 mm Stroke rate: 160 strokes/min Ram surface: 160 x 160 mm Ram adjustment: 40 mm Ram bore: 32 H7 mm Throughhole in table: 200 x 150 mm Clamping plate: 500 x 380 x 60 mm Total power requirement: 2.7 kW Machine weight approx.: 1.9 t Space requirement approx.: 1.3 x 1.0 x 1.85 m - Ortlinghaus pneumatic clutch/brake combination - Vogel central lubrication - Balluff cam controller - Height-adjustable table - Control cabinet with touchscreen - Foot switch

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2021, obratovalne ure: 95 h, nosilnost: 200 kg, dvižna višina: 13.000 mm, gradbena višina: 2.100 mm, vrsta goriva: električni, vrsta pogona: Elektro, Členasta teleskopska dvižna ploščad Tehnično stanje: zelo dobro Sprednje pnevmatike tip: polna guma Sprednje pnevmatike dimenzija: 600x190 Zadnje pnevmatike tip: polna guma Zadnje pnevmatike dimenzija: 600x190 Baterija volt: 48V Kjdevky D Sspfx Ab Asdl CE certifikat,

Leto izdelave: 2002, stanje: rabljeno, Diameter 180 mm Workpiece length 0 mm Workpiece width 1350 mm Total power requirement 65 kW Machine weight approx. 7,500 kg Required floor space approx. m T I M E S A V E R S (Netherlands) Wide Belt Deburring and Finishing Machine Model 41 Series 1350 WRDOW-N Year of manufacture 2002 Serial No. 2313-03 _____ Sanding width approx. 1,350 mm Max. workpiece height approx. 1 – 50 mm Feed speed variable approx. 1 – 10 m/min Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, 780 mm vacuum track in the center of the belt. Belt feed motor approx. 3 kW, frequency controlled for continuously variable feed rate 1 – 10 m/min. Selector switch for forward and reverse belt run, digital display for belt speed and continuous table height adjustment. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, belt speed approx. 11-22 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 3.) Vertical sanding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive nonwoven abrasive in various grades available, specially for deburring and cleaning surfaces as well as for radii rounding on workpieces. Also suitable for workpieces with varying heights. Drive approx. 7.5 kW, disc oscillates motor-driven (2.2 kW) across the entire belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, belt speed approx. 11 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 5.) Wet processing version = complete coolant system consisting of belt filter unit with pump installed in machine base, rotary union on top of the deburring disc spindle, return of coolant via the vacuum table, and water mist separator above the machine, with blower approx. 5.3 kW. Side doors in V2A stainless steel sheet, oil skimmer, etc. 6.) Side-mounted control panel with clear controls and digital position and speed display. Joystick for feed belt and table adjustment, 3 x ammeters, etc. as well as front and rear workpiece pressure rollers, emergency stop Total drive power approx. 65 kW - 400 V – 50Hz Weight approx. 7,500 kg Kdjdpfxot Hw Shj Ab Aol Required room height approx. 3.50 m Condition: good – available for demonstration under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Stanje: novo, Pressure: 40 t Throat depth: 225 mm Stroke: 8–84 mm Kodpfeb U Hwmsx Ab Aodl Table size: 580 x 450 mm Ram adjustment: 55 mm Strokes per minute: 130 spm Ram surface: 185 x 180 mm Ram bore: 40 H7 mm Passage opening in table: 210 x 170 mm T-slots: 22 mm Clamping plate: 570 x 450 x 65 mm Total power requirement: 3.5 kW Machine weight approx.: 2.7 t Space requirement approx.: 1.4 x 1.1 x 2.1 m - Pneumatic clutch-brake combination Ortlinghaus - Central lubrication system Vogel - Cam controller Balluff - Height-adjustable table - Control cabinet with touchscreen - Foot switch

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Blechbreite 1550 mm Blechstärke 6,5 mm Anbiegung 4,5 mm Oberwalzen-Durchmesser 150 mm Seitenwalzendurchmesser 130 mm Unterwalzen-Durchmesser 150 mm Abstand max. OW zu UW 20,0 mm Gesamtleistungsbedarf 2,2 + 1,5 kW Maschinengewicht ca. 2370 kg Ksdpexabkbofx Ab Aodl Abmessung L-B-H 3300 x 1150 x 1110 mm Ausstellungsmaschine - NEU noch nicht in Gebrauch gewesen (!!) Sonderpreis auf Anfrage Ausstattung: - elektro-hydraulische 4-Walzen Rundbiegemaschine * mit angetriebener Oberwalze + Unterwalze * stabile Schweißkonstruktion - Einsatzbereich: * leichte bis schwere Blechbearbeitung (Stahl/ALU/Edelstahl) - elektro-hydraulische Verstellung der Unter- + Seitenwalzen - lineare Führung der Seitenwalzen - Oberwalze angetrieben durch robusten Elektromotor + Planetengetriebe - freibewegliches, separates Bedienpult - gehärtete Walzen SAE 1050 (CK 45) + bombiert - Konischbiegeeinrichtung - 3x Achs Digitalanzeige für genaue Walzenpositionen - elektro-hydraulisches Klapplager - Bedienungsanleitung (PDF)

Stanje: novo, Pressure: 25 t Throat depth: 200 mm Stroke: 4 - 80 mm Table size: 520 x 400 mm Strokes per minute: 160 spm Continuous operating capacity: 1370 Nm Single stroke capacity: 2740 Nm Stroke adjustment: 4 - 80 mm Ram adjustment: 40 mm Kjdpfxjb U Hwne Ab Asdl Ram surface: 160 x 160 mm Table through-hole: 200 x 150 mm Clamping plate: 500 x 380 x 60 mm Table through-hole: 80 mm Machine weight approx. 1.9 t - Ortlinghaus hydraulic clutch-brake combination - Vogel central lubrication system - Balluff cam controller - Height-adjustable table - Control cabinet with touchscreen - Foot switch

Stanje: rabljeno, Leto izdelave: 2008, številka stroja/vozila: 0-411-49-1873, Technical data: - Manufacturer: Bütfering - Model: Optimat SGO 211/RC - Number of sanding units: 2 - Year of manufacture: 2008 - Working width: 1,100 mm - Sanding belt width: 1,120 mm - Sanding belt length: 1,900 mm - Workpiece thickness: 3–160 mm - Feed speed: 2.5–13 m/min - Weight: 1,800 kg - Table height adjustment Standard equipment: - Automatic workpiece thickness setting - Infinitely variable feed speed via frequency converter - Up to 125 sanding programs storable - Maintenance-free braking system Kjdpeyh Hwuefx Ab Ajdl 1st sanding unit (R) - Calibration roller - Profiled steel contact roller - Diameter: 160 mm - Drive motor: 15 kW 2nd sanding unit (C) - Combination unit with roller and sanding pad - Rubberized contact roller, 65 Shore - Contact roller diameter: 160 mm - Electronic segmented pressure beam with 35 mm segment width - Belt speeds: 12 and 21 m/s - Tolerance compensation up to 1 mm - Suitable for veneered surfaces and solid wood - Drive motor: 11 kW - Total connected load: approx. 28 kW - Operating voltage: 400 V / 50 Hz - Compressed air consumption at 6 bar: 20 l/min - Belt blow-off device per pressure pulse: 440 l/min - Extraction volume: approx. 2,880 m³/h at 20 m/s - Extraction nozzle: 1 x Ø 160 mm (sanding unit, roller) 1 x Ø 160 mm (sanding unit, pad) Dimensions: - Length: 1,700 mm - Width: 1,850 mm - Height: 2,100 mm - Location: not in stock - Available from April 2026