Enoslojna stiskalnica - hidravlična

TOX-Pressotechnik PC 30.56

Stanje: rabljeno, Technical Specifications: Pressing force: 25 t Stroke: 500 mm Installation height: table/ram upper position: 800 mm Throat depth: 360 mm Ram stroke: 500 mm Ram speed, advance: 0.100 m/s Ram speed, return: 0.45 m/s Table dimensions: 630 x 500 x 75 mm Clearance in table: Ø 180 mm Ram clamping surface: 450 x 360 mm Ram bore (spindle hole): Ø 32 mm Height above floor: 710 mm Total power requirement: 8.75 kW Approx. machine weight: 2.2 t Approx. machine dimensions (LxWxH): 1.7 x 1.1 x 2.95 m Operation via two-hand control panel (and one-hand control in setup mode) Continuous and single stroke modes Hnedpfevc Awxox Adksi

Stanje: novo, stiskalna sila: 10 t, - Capacity 10 tons - Cylinder stroke 600 mm Hsdsgwxm Hjpfx Adkoni - Pressure gauge - Emergency stop - 400V

Stanje: rabljeno, Leto izdelave: 2005, Tlak 25 t Hod 145 mm Prosta širina med stebri 600 x 160 mm Hsdpfx Ajxz Sbysdksni Teža stroja ca. 0,15 t Prostorske zahteve ca. 0,8 x 0,6 x 1,8 m Bočno nastavljiv cilinder

Leto izdelave: 1978, stanje: rabljeno, Pressure: 25 t Stroke: 100 mm Table surface: 440 x 320 mm Ram surface: 360 x 220 mm Through-hole in table: 160 x 100 mm Table height: 900 mm Pin hole in ram: Ø 40 mm Installation height: 280 mm Hsdjlp U A Ispfx Adkjni Machine weight approx.: 1.5 t Required space (WxDxH): approx. 1500 x 1500 x 2100 mm Sick light curtain for cycle operation Two-hand control Rapid and working stroke Travel / pressure-dependent shut-off Only approved for use with safe tools

Leto izdelave: 1987, stanje: rabljeno, Pressure: 40 t Throat depth: 270 mm Stroke: 4-100 mm Strokes per minute: 130 spm Slide adjustment: 80 mm Table surface: 670x540 mm Slide surface: 460x300 mm Passage opening in table: Ø 100 mm Table height: 850 mm Ram bore diameter: Ø 50 mm Machine weight: approx. 6 t Space requirements (WxDxH): approx. 1500x2300x3300 mm Features: - Hydraulic clutch-brake combination - Centralized grease lubrication Hodpfx Aep Syctjdkjni - Hydraulic overload protection in ram - Automatic stroke adjustment - Motorized ram adjustment - Two-hand operation - Foot pedal operation - Counter bearing - Air cooler - Hydraulic pin clamping - Hydraulic connecting rod clamping - Hydraulic tool clamping

Stanje: dober (rabljeno), stiskalna sila: 50 t, hod: 320 mm, Capacity: 50 tons Throat Depth: 225 mm Stroke Rate: 320 strokes/min Table Size: 500 x 800 mm Hnjdott A T Tspfx Adksi Machine Dimensions (LxWxH): 160 x 120 x 260 cm Machine Weight: 6 tons

Stanje: novo, Pressure: 20 t Stroke: 180 mm Clear gap between uprights: 540 x 100 mm Max. installation height: 990 mm Cylinder diameter: 72 mm Piston diameter: 48 mm Machine weight: approx. 0.12 t Space requirements: approx. 0.8 x 0.7 x 1.8 m This frame press is CE-certified according to the latest directives - with manual hydraulics - Cylinder can be moved laterally - 2 press blocks 200x250x40mm / 200x70x40mm, max. 30 t, with M16 threaded holes and several M16 threaded bolts - 8 pressing pins, 10 - 30 mm, with quick-change adapter, max. 20 t Hnodpfx Adeupxc Tokei - 2 press plates

Stanje: novo, Leto izdelave: 2025, prebojna odprtina v mizi: 140 mm, širina mize: 440 mm, dolžina mize: 700 mm, nastavitev hoda: 80 mm, stiskalna sila: 40 t, vrtina cilindra: 35 mm, moč: 4 kW (5,44 KM), prebijalna sila: 40 t, trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, Eccentric Press; is a type of mechanical press used in cold forming operations such as punching, cutting, and forming with dies. It operates by transmitting force through an eccentric mechanism. Thanks to its high production speed and repeatability, it provides an efficient and reliable solution for mass production lines. CRONOSSTECH C-Type Eccentric Press 40 Ton is designed for stable operation in cold forming applications. Its rigid steel frame construction, pneumatic clutch-brake system, and CE-compliant safety infrastructure offer reliable performance suitable for serial production. Key advantages: - Stable stroke performance and high repeatability in mass production - Operator safety-focused design (light curtain + safety systems) - Low maintenance thanks to centralized automatic lubrication - Production-ready use with PLC control + dual hand/foot control Areas of application: - Cold cutting and punching operations - Cold notching applications - Metal forming with dies - High volume production lines ✅ STANDARD FEATURES • Steel frame construction • Four-point guided ram • Spheroidal cast connecting rod and gear bearings • Crankshaft and transmission shafts made from 4140 tempered steel • Centralized, fully automatic grease lubrication system • Pneumatic clutch and brake combination • CE safety directive compliant • Dual-coil safety valve • Manually adjustable stroke • Light curtain finger–hand protection safety system • PLC control system • Dual hand/foot control system • Mechanical safety lock system Hjdpjvtx Axsfx Adkoni • Emergency reverse motor operation • Compliant with occupational safety regulations • Compliant with CE standards ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD panel (standard for 150–300 ton models) • Hydraulic safety system (standard for 200–300 ton models) • Spare bolster plate • Decoiler, feeder, and straightener • One set of dies as specified • Eight-point guided ram ✅ TECHNICAL SPECIFICATIONS (40 TON) Capacity: 40 Ton Throat depth: 220 mm Table–ram distance: 340 mm Distance between side frames: 330 mm Ram adjustment (setting): 60 mm Approx. press width: 1050 mm Approx. press depth: 1280 mm Approx. press height: 2100 mm Front anchorage dimension: 575 mm Side anchorage dimension: 740 mm Table hole diameter: Ø150 mm Table size: 440×630 mm Die holder slot diameter: Ø40 mm Ram size: 290×180 mm Floor-to-table height: 720 mm Stroke adjustment: 10–70 mm Strokes per minute: 55 spm Motor power: 4 kW Motor speed: 1450 rpm Approx. weight: 2100 kg Note: For any requests to modify the technical specifications, please contact us. ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Stanje: rabljeno, Technical details: Hnsdpfxsu U D I Re Adksi Pressing force: 25 t Column width: 360 mm Stroke: 500 mm Installation height, table/ram top: 800 mm Throat depth: 360 mm Ram stroke: 500 mm Ram advance speed: 0.200 m/s Ram return speed: 0.45 m/s Table size: 630 x 500 x 71 mm Table opening: Ø 182 mm Ram clamping surface: 450 x 360 mm Pin hole in ram: Ø 32 x 72 mm Ram diameter: Ø 125 mm Height above floor: 710 mm Total power requirement: 12.5 kW Machine weight approx.: 2.4 t Machine dimensions (LxWxH) approx.: 1.7 x 1.1 x 2.95 m Operation via two-hand control panel (and one-hand operation in setup mode) Continuous and single stroke modes TÜV inspection valid until 05/2024 As is. *

Stanje: zelo dobro (rabljeno), Leto izdelave: 1977, Funkcionalnost: popolnoma funkcionalen, skupna višina: 27.500 mm, skupna širina: 10.500 mm, skupna dolžina: 16.500 mm, stiskalna sila: 25 t, širina mize: 630 mm, dolžina mize: 500 mm, obratovalna hitrost: 200 mm/s, skupna masa: 2.400 kg, hitrost vzvratne vožnje: 450 mm/s, širina plošče bata: 450 mm, dolžina plošče bata: 360 mm, razdalja med stojali: 800 mm, hod: 500 mm, moč: 12,5 kW (17,00 KM), Hydraulic Press PYE 25 SS. Year of manufacture: 1977. Manufacturer: VEB Wema Zeulenroda (Germany). Specifications: - Maximum pressing force: 25 tons - Operating pressure: 16 MPa - Upper table: 450 x 360 mm - Lower table: 630 x 500 mm - Daylight opening: 800 mm - Ram stroke: 500 mm - Descending speed: 200 mm/sec - Ascending speed: 450 mm/sec - Power requirement: 12.5 kW Hsdpfjtzxvwox Adkjni - Weight: 2,400 kg - Height: 2,750 mm, Length: 1,650 mm, Width: 1,050 mm The technical condition of the machine is very good. The machine has undergone a complete overhaul. Inspection and operational testing of the machine are possible on site.