Namizni vrtalni mlin

TOS VARNSDORF WHQ 13.8 CNC

Stanje: dober (rabljeno), Leto izdelave: 2006, 1 used 4-axis horizontal machining center Manufacturer: Haas Model: EC 1600 Year of manufacture: 2006 Travel distances: X-axis: 1626 mm Y-axis: 1270 mm Z-axis: 813 mm Spindle centerline to table: 304 mm Spindle: Taper: SK 50 Bwedpfx Agjv N Di Asqep Max. rated power: 22.4 kW Max. speed: 7,500 rpm Max. torque: 460.0 Nm at 700 rpm Table dimensions: Length: 1626 mm Width: 914 mm T-slot width: 16.00 mm T-slot spacing (center-to-center): 125 mm Number of T-slots (standard): 7 Max. table load (evenly distributed): 4,536 kg Integrated 4th axis (B-axis): Table: 1,626 mm x 813 mm Clamping surface diameter: 762 mm Rotation range: 360° Max. workpiece swing diameter: 1,270 mm Table load: 4,536 kg Max. rated power: 3.7 kW Continuous rotation torque: 2,712 Nm Backlash: 30 arc-sec Transmission ratio: 500:1 Braking torque: 5,423 Nm Minimum resolution: 0.001° Indexing accuracy: ±30 arc-sec Repeatability: 15 arc-sec Rapid traverse on B: 36°/sec Max. feed rate for cutting (B axis): 36°/sec Spindle centerline to table: 146 mm Max. feed rate for cutting in X, Y, Z axes: 12.7 m/min Rapid traverse (X): 15.2 m/min Rapid traverse (Y): 15.2 m/min Rapid traverse (Z): 15.2 m/min Axis motors Tool changer: 30 stations Max. tool diameter (all positions filled): 102 mm Max. tool diameter (adjacent pockets empty): 254 mm Max. tool length: 508 mm Max. tool weight: 13.6 kg Tool-to-tool (average): 8.00 s Chip-to-chip (average): 12.60 s General specifications: Coolant tank capacity: 360 L Dimensions: Domestic pallet: 488 cm x 366 cm x 346 cm Export crate: 488 cm x 366 cm x 348 cm Weight: 13,608 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 700 mm, merilno območje osi Y: 1.000 mm, merilno območje os Z: 600 mm, Used Machine – Mitutoyo Crysta Apex C7106 Bwsdpfxjvpdhxj Agqop Here I am offering a very well-maintained 3D coordinate measuring machine (CMM) from Mitutoyo. The machine was manufactured in 2004 and was exclusively operated in a climate-controlled measuring room. This is a top-of-the-line, fully equipped machine, so you can start working with it immediately! We can, of course, organize transport, installation, commissioning, and calibration (factory or DAkkS certification) for you, so you do not have to worry about any of the logistics. Machine configuration can be tailored to your requirements upon request. Typically, these machines are equipped with a rotary and swivel head, including the corresponding probe and modules. A probe rack can also be offered if not already included. We can also provide a software upgrade if required. For specifications, please refer to the PDF or images. Leasing available on request. (All prices are net plus VAT.)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, x-axis travel: 4216.0 mm y-axis travel: 2007.0 mm z-axis travel: 305.0 mm CNC control Table size: 4902.0 x 2134.0 mm Max. workpiece weight: 1465 kg/m² Machine weight: approx. 2500 kg Total power requirement: 30 kW Space requirement: approx. 5486.0 x 3708.0 mm The compact bridge-style waterjet cutting machine features a torsion-resistant steel frame with a specialized, durable anti-corrosion coating. Both X axes and the particularly elevated Y axis utilize the maintenance-free Intelli-TRAX drive system, specifically developed by OMAX to meet the unique demands of waterjet cutting applications. Equipment: - Motorized Z axis - Water level control - Abrasive feed system with AFS 1000 abrasive delivery unit - High-pressure system made of special stainless-steel tubing - MAXIEM direct pump M4050 - OMAX PC control software Intelli-MAX for MAXIEM - OMAX PC control software Intelli-MAX Premium - Cutting head technology based on the 5-axis A-Jet taper compensation head - Height sensor for the 5-axis A-Jet cutting head - Laser pointer for positioning assistance - Automatic sludge removal system MBM ASAS-ME - Compressed air injection for the automatic sludge removal system MBM ASAS-ME Bwjdpeyclvnjfx Agqjp - Clamping and fixturing set for sheet and workpiece securing - Catch grate in the cutting tank - Sensors for automatic process monitoring - Water treatment via water conditioning system, including water analysis - Omni-Start (Vacuum Assist) piercing aid for brittle and laminated materials

Stanje: dober (rabljeno), Leto izdelave: 2014, Caracteristici tehnice ale acestui centru de prelucrare cu 5 axe Producător: DMG Model: DMU 50 An fabricație: 2014 Control CNC 3D: HEIDENHAIN ITNC530 SMART NC Bwedjy Smynjpfx Agqep Tip ecran: DMG ERGOLINE®️ CONTROL 19” Masă rotativă NC basculantă, simultană: INCLUSĂ Suprafață masă: 630×500 mm Greutate maximă admisă pe masă: 250 kg / palet Masă rotativă (Axa C): 0,001º (±360º) Axe Deplasare longitudinală (Axa X): 500 mm Deplasare transversală (Axa Y): 450 mm Deplasare verticală (Axa Z): 400 mm Avans rapid (axe X/Y/Z): 42.000 mm/min Avans de lucru (axe X/Y/Z): 10.000 mm/min Interval înclinare (Axa B): -5º/+110º Broșă Turație broșă: 10.000 rpm Con frână: SK40-DIN 69871 Putere motor principal: 25 kW Schimbător automat de scule (ATC) Număr locașuri ATC: 60 Lungime maximă sculă: 300 mm Echipare Transportor de șpan: INCLUS Răcire activă a dulapului electric: INCLUS Palpator de scule: INCLUS Sistem de măsurare directă: INCLUS Pistol de spălare: INCLUS Manșă portabilă de comandă: INCLUS Sistem de aspirație: INCLUS Răcire internă: INCLUS Rezervor lichid de răcire cu filtru de hârtie: INCLUS Altele Dimensiuni utilaj (Lxlxh): 5.100×3.200×2.750 mm Putere electrică totală: 27 kVA Greutate utilaj: 4.500 kg Preț la cerere

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 825 mm, pomik po osi Z: 1.100 mm, hitro pomikanje X-os: 48.000 m/min, hitri pomik os Y: 80.000 m/min, hitri pomik na osi Z: 48.000 m/min, širina mize: 835 mm, dolžina mize: 3.500 mm, obremenitev mize: 3.500 kg, 3-Axis Machining Center MATEC - 40 HV MACH-ID 9178 Manufacturer: MATEC Model: 40 HV Control: Heidenhain iTNC530 Bodpswyv Nzjfx Agqowp Year of manufacture: 2008 X-axis travel: 3000 mm Y-axis travel: 825 mm Z-axis travel: 1100 mm B-axis: -3° to +105° Table length: 3500 mm Table width: 835 mm Table load capacity: 3500 kg X-axis feed rate: 48,000 mm/min Y-axis feed rate: 80,000 mm/min Z-axis feed rate: 48,000 mm/min Tool holder: HSK 100 ISO/BT/MK Spindle power: 37 kW Spindle speed: 8,000 rpm Tool changer: 40 positions Internal coolant supply: 25 bar Number of controlled axes: 4 Chip conveyor: Yes Coolant system: Yes Length: 8,000 mm Width: 3,800 mm Height: 3,800 mm

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2000, obratovalne ure: 25.000 h, potovalna razdalja osi X: 10.300 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 1.800 mm, hitrost pomika os X: 10 m/min, hitrost podajanja osi Y: 10 m/min, hitrost podajanja os Z: 10 m/min, položaj glave za glodanje: 2.5 x 2.5 °, največja hitrost vretena: 3.000 obr/min, hitrost vretena (min.): 60 obr/min, širina mize: 3.300 mm, dolžina mize: 12.000 mm, montažni premer: 50 mm, skupna višina: 48.750 mm, skupna širina: 100.000 mm, skupna dolžina: 212.000 mm, skupna masa: 100.000 kg, Duplex-Fräsmaschinen bestehen aus zwei Maschinen, die einander gegenüber angeordnet sind und entweder separat oder als eine Einheit betrieben werden können. Das Werkstück kann dabei mit zwei simultan arbeitenden Spindeln bearbeitet werden. Produktivitätssteigerung von bis zu 50 % im Vergleich zu konventionellen Lösungen, also Einzel-Fräsmaschinen Verbesserte Bauteilgenauigkeit, da die Bearbeitung in den meisten Fällen in nur einer Aufspannung erfolgt Ein einziger Bediener kann die DUPLEX-Fräsmaschinen steuern Geringerer Platz- und Investitionsbedarf im Vergleich zu zwei Einzelmaschinen Schnelle Amortisation der Investition aufgrund der hohen Produktivität DUPLEX-Lösungen ermöglichen verschiedene Konfigurationen: Einzelner Arbeitsraum oder Pendelbearbeitung Geeignet zur Bearbeitung von Baggerarmen/-auslegern wie z.B. von CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo X-Achse: 10.300 mm Y-Achse: 2.000 mm Bwoderx Rxtjpfx Agqjp Z-Achse: 1.800 mm Tischlänge: 12.000 mm Tischbreite: 3.300 mm Tischbelastung: 100.000 kg Spindelleistung: 22/30 kW Spindeldrehzahlen: 60 - 3.000 min⁻¹ Spindelaufnahme: 50 ISO / BT / MK Vorschub X-Achse: 10.000 mm/min Vorschub Y-Achse: 10.000 mm/min Vorschub Z-Achse: 10.000 mm/min Fräskopf, automatisch indexierend: 2,5 x 2,5° Betriebsstunden: 25.000 h Länge: 21.200 mm Breite: 10.000 mm Höhe: 4.875 mm Gewicht: 100.000 kg

Stanje: rabljeno, Leto izdelave: 1997, Tehnične podrobnosti: Modul - maks.: 7 Teža stroja cca: 5 t Premer brusnega polža: 280-350 mm Širina brusnega polža: 84-104 mm Min. število zob: 6 Maks. število zob: 600 Največji dovoljeni premer glave: 360 mm Maksimalna teža obdelovanca: 60 kg Bwjdpfx Agex Aq Egeqep brez filtra z hladilnikom hidravličnega olja in vračanjem brusilnega olja

Stanje: zelo dobro (rabljeno), Leto izdelave: 1972, Funkcionalnost: popolnoma funkcionalen, Prodajamo ta stružnica. Priključena, možnost preizkusa. Stroj ima priloženo dodatno opremo. Stružni premer: 2.000 mm. Stružna dolžina: 10.000 mm. Največja masa obdelovanca: 60.000 kg. Premer obdelave: 2.000 mm. Video stroja je možno poslati preko aplikacije WhatsApp. Bwedpsxwmbmjfx Agqsp

Stanje: dober (rabljeno), Leto izdelave: 1998, Max. pitch circle diameter external gearing: 300 mm Max. pitch circle diameter internal gearing: 300 mm Max. outside diameter of workpiece (fixture): 450 mm Module - max.: 6 Max. gear width: 100 mm Max. helix angle (with tool Ø 125 mm): +/- 45° Stroke rate - infinitely variable: 130 - 1300 strokes/min Workpiece weight: 1000 kg Minimum distance table surface - tool spindle: -55 / +300 mm Maximum distance table surface - tool spindle: 200 mm Maximal distance table surface - tool spindle: 350 mm Manual column lateral displacement: +/- 25 mm Manual swivel angle of the tool spindle: +/- 0.5° Max. tool speed: 15 rpm Max. workpiece speed: 27 rpm Max. tool diameter: 7 in Voltage: 400 V Frequency: 50 Hz Max. mains current: 70 A Bwsdpfxevu E Nue Agqsp Total power requirement: 48 kW Machine weight approx.: 11 t Space requirements approx.: 4.27 x 3.11 x 2.87 m Main spindle taper: SK 45 Table bore: 40 mm Control: Siemens Sinumerik 840 C Gear shaping machine: Gleason PFAUTER Mod. PSA 300 CNC modular gear cutting machine with shaping cutter for the machining of external and internal cylindrical gears, with straight or helical involute gearing as well as any other profile achievable via generating or form shaping processes. The machining cycle is controlled by a CNC unit, equipped with dedicated gear cutting software. Application scope --> The PSA 300 is designed for manufacturing: - Gears with straight external toothing - Gears with straight internal toothing - Gears with external helical gearing - Gears with internal helical gearing

Stanje: rabljeno, Leto izdelave: 2001, Technical details: X-travel: 2500 mm Y-travel: 1000 mm Z-travel: 750 mm Table size: 3220 x 1000 mm Workpiece weight approx.: 3000 kg Spindle taper ISO: 50 Spindle speed range: 20 - 5000 rpm Feed rate: 1-30000 mm/min Rapid traverse: 30 m/min Total connected load: 40 kW Required space approx.: 6.9 x 4.1 x 3.7 m Machine weight approx.: 21 t Equipped with: - CNC control HEIDENHAIN TNC 426 - 30-position automatic tool changer Bwedpfx Agsvptmwsqep - RENISHAW probe - Coolant system with through-spindle coolant (IKZ) and chip conveyor - Various tool holders *