Valjčna brusilka

TOS Hostivař BUT 63

Leto izdelave: 1965, Stanje: rabljeno, Feed travel (servo-controlled) 2 / 3 mm / Ø Feed amount at table reversal 0.01 – 0.10 mm / Ø Swiveling grinding headstock, right/left +/- 30 ° Grinding wheel dimensions: Ø x width x bore 750 x 100 (225) x 305 mm Grinding spindle motor speed 1,460 rpm Workpiece headstock / tailstock taper Morse 6 Table speed 0.05 – 5 / 8 mm / min Table swiveling range +/- 3 ° degrees Spindle drive 18.5 kW / Total drive 28 kW - 400 V – 50 Hz Weight approx. 15,000 kg Accessories / Special equipment: • The machine was completely overhauled in 1998 and upgraded with a SIEMENS PLC S7-300 control system. All motors have been replaced, and the workpiece drive as well as the grinding head infeed have been fitted with servo drives. The entire electrical system as well as the essential hydraulic components were replaced. A modern operator panel with pushbuttons and interface was retrofitted. • Automatic grinding cycle for longitudinal and plunge grinding. All grinding parameters are input digitally on the SIEMENS OP 77A operator panel; the infeed axis features an electronic handwheel. • MPM microprocessor-based wheel balancing system AB300SM3.C with balancing head mounted on the flange and BM240M control module installed on the control panel (retrofitted in 2019) • Infinitely variable workpiece drive speeds with digital display • Dressing unit mounted on the tailstock • 3 open steady rests • Separate electrical cabinet, separate hydraulic unit, accessories, operating manuals Condition: very good – the machine has been thoroughly serviced twice a year. Ready for demonstration under power shortly. Delivery: ex stock, prompt – as inspected Payment: 100% net – upon receipt of invoice Nodpfx Adougnn Seyekt Please review, we always carry cylindrical grinders of all sizes in stock!

Stanje: dober (rabljeno), Leto izdelave: 1988, Operating voltage: 380 V Connected load: 7.5 kVA Dimensions: 2725 x 1930 x 1773 mm Machine weight approx. 2500 kg Nkedpsw Dvkaefx Adyjt Technical Data – Main Specifications: - Table surface: 605 x 300 mm - Max. table longitudinal travel (manual): 750 mm - Table cross travel: 340 mm - Grinding height between table and new grinding wheel min./max.: 22.5 / 322.5 mm - Standard size of magnetic chuck: 600 x 300 mm - Workpiece weight incl. magnet: 420 kg X axis / Longitudinal travel: - T-slots (number x width): 3 x 17 mm - Table feed, hydraulic: 0.3 – 25 m/min - Travel per handwheel revolution: 47 mm Y axis / Vertical travel: - Automatic vertical feed – Coarse, 12 steps: 0.001 – 0.03 mm - Automatic vertical feed – Fine, 8 steps: 0.001 – 0.01 mm - Travel per handwheel revolution (x1/x10): 0.1 / 1.0 mm - Dial graduation on handwheel (x1/x10): 0.001 / 0.1 mm - Spark-out strokes: 0 – 5 - Rapid traverse: 400 mm/min Z axis / Cross travel: - Automatic cross feed, intermittent: 0.5 – 20 mm - Automatic cross feed / rapid traverse, continuous: 0.1 – 1.0 m/min - Travel per handwheel revolution: 5.0 mm - Dial graduation on handwheel: 0.02 mm Standard grinding wheel: - Diameter x width: Ø 355x38 (50) mm - Bore: Ø 127 mm - Speed: 1500 min⁻¹ Accessories: Various grinding wheels Documentation

Stanje: zelo dobro (rabljeno), Grinding length 1000 mm Grinding diameter ø 350 mm In very good condition. Nedpfx Aok Abxxedyokt

Leto izdelave: 1994, Stanje: zelo dobro (rabljeno), številka stroja/vozila: 04.2398, Manufacturer: Arthur Klink Model: RIW 10 x 1500 x 500 Machine No.: 04.2398 Year of manufacture: fully refurbished by the manufacturer in 1994 Weight: 3,700 kg Tensile force: 10,000 kg (100 kN) Max. stroke: 1,500 mm Max. workpiece diameter: Ø 500 mm Broaching speeds: steplessly adjustable from 1 m/min up to 6 m/min Njdpogyd T Esfx Adyokt Return speed: steplessly adjustable up to 20 m/min Power supply: 400V / 50Hz

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, premer struženja: 1.000 mm, stružna dolžina: 8.000 mm, skupna dolžina: 10.500 mm, Offered for sale is a used lathe from the Italian manufacturer Leopolod Pontiggia, model NH 500. Nsdpfx Adsv Epigoyekt Technical specifications: Swing over bed: 1,000 mm Turning length: 8,000 mm Comprehensive equipment as shown in the photos: 1 x 3-jaw chuck 1 x 4-jaw chuck 1 x steady rest + various adapters

Leto izdelave: 1977, Stanje: rabljeno, Surface grinding machine, manufacturer Okamoto, model PSG-63 UA, year 1977. Nkodpfx Aeiz Tmkodyet Magnetic chuck: 600 mm x 300 mm. Grinding capacity: longitudinal 630 mm, cross 310 mm, height 350 mm. Ready for operation.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Sväng över bädd: 1290 mm Sväng över tvärslid: 910 mm Sväng i urtag (l:500 mm): 1580 mm Spetsavstånd: 6000 mm Spindelgenomgång: 155 mm Spindelvarvtal: 6–800 rpm Spindelnos: ASA A2 11" Arbetsstyckets vikt mellan spetsar: 20 ton Kon i bakdubb: MK6 Längdmatning: 0,045–5 mm/varv Tvärmatning: 0,022–1,5 mm/varv Metrisk gänga: 0,5–56 Modulgänga: 0,25–28 Whitworth-gänga: 1/2–84/" Spindelmotor: 30 hk Tillverkningsår: 1971 Längd: 9500 mm Bredd: 2000 mm Höjd: 1600 mm Nkedpjwc Nzpofx Adyst Vikt: 13 400 kg Sony DRO tvärslid 3 st stabilstöd Planskiva 4-backig planskruv Härdade gejdrar Elmatning på översta sliden

Stanje: dober (rabljeno), Distance between centers: 1000 mm Center height: 175 mm Grinding length: 500 mm Max. workpiece diameter: 300 mm Nkodpfx Aett Rawsdyot Grinding wheel dimensions (OD x ID x width): Ø500 x Ø203 x 80/100 mm Internal taper: Morse 5 Grinding wheel motor power: 7.5 kW Total power: 17 kW Longitudinal carriage travel (X axis): 267 mm Cross carriage travel (Z axis): 650 mm CNC brand: FANUC CNC model: 16-T Swivel range: +/- 8.5º Dimensions: 2600 mm x 2300 mm x 2100 mm Approx. weight: 4200 kg

Stanje: dober (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 1.050 mm, dolžina pomika po osi Y: 360 mm, dolžina podajanja os Z: 500 mm, potovalna razdalja osi X: 1.050 mm, pomik osi Y: 360 mm, pomik po osi Z: 500 mm, skupna masa: 3.000 kg, Oprema: dokumentacija / priročnik, Tiger FO 135 Universal Milling Machine Description: The machine was purchased new in 1994 and has only seen minimal hours of operation. The milling machine is fully functional. The axis movements are smooth and the guides are in good condition, featuring an automatic lubrication system. The table is also in very good condition, with barely any signs of wear. The machine is equipped with a digital readout (DRO) for all three axes, allowing for work with tool compensation and repeated measurement processes. Both the machine and the DRO are supplied with operating manuals. Technical Specifications: • Table dimensions: 1,400 x 340 mm, 4 T-slots • Automatic travel: ➢ Longitudinal (X): 1,050 mm ➢ Cross (Y): 360 mm ➢ Vertical (Z): 500 mm • Spindle taper clamping: Nkodpsrqwbiofx Adyjt ➢ Vertical axis: ISO 40, automatic locking ➢ Horizontal axis: ISO 40, manual locking • Spindle speed range: ➢ Vertical axis: 33 to 1,560 rpm, 12 speeds ➢ Horizontal axis: 35 to 1,550 rpm, 12 speeds • Installed drives: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ DC motor, 15 Nm • Infinitely variable feed rate: 0 – 1,500 mm/min • Rapid traverse: ➢ Longitudinal and cross: 3,000 mm/min ➢ Vertical: 1,500 mm/min • Universal head with 80 mm manual quill travel • Automatic lubrication with pump • Low voltage electrical controls on side arm control panel • Star-delta start • Magnetic thermal protection by Siemens • Net weight: 3,000 kg • Machine dimensions (for transport): ➢ Width: 2,300 mm ➢ Depth: 2,900 mm ➢ Height: 2,400 mm Accessories: • Counter supports for cutter arbor • Cutter arbor ø32 mm

Leto izdelave: 1985, Stanje: delavnici obnovljeno (rabljeno), REFORM Type AR 10 Model 40H Surface Grinding Machine Year of manufacture: 1985 Njdpfxod E Np Ee Adyokt 30 kW grinding motor Modicon control unit 6-step magnetic control Magnet size: 1000 x 300 mm Segment head diameter: 460 mm Segment dimensions: 90 x 38 x 180 mm Number of segments: 1 set = 8 pieces Infinitely adjustable grinding motor infeed: 0.01 mm – 0.1 mm Hydraulic oscillating drive New power supply cables between machine and control cabinet