Večvretenska orodja

TORNOS MD32/6i

Stanje: novo, Leto izdelave: 2024, New machine Year of manufacture: 2024 Features and technical specifications: Right-hand version Technical data: Overall dimensions: 1,900 x 1,410 mm Hopper opening: 1,044 x 1,044 mm Hopper height: 1,010 mm Hopper capacity: 1.1 m³ Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput capacity: up to 50 kg/h (depending on material) Paint finish: Weima Standard Connection: 400 V +/- 5 % / 50 Hz Included: Press mechanism with feed cylinder, main cylinder, clamping cylinder Connection part for transport pipe Chromed clamping tongs Hydraulic tank 160 l with pump motor + valve control Oil temperature safety switch Base plate 1,040 x 1,040 mm with agitator + motor and screw conveyor discharge screw + motor Side walls standard height 1,010 mm Gsdpfx Aot Hagnob Teuk Base frame with rubber feet Control cabinet on hopper and electrical control unit Briquette length monitoring Automatic end-position of all cylinders Manual control Automatic on/off with fill level limit switch Material: Planer shavings, wood shavings from solid wood, loose, clean and free from foreign matter* Dimensions: max. 12 mm Throughput capacity: approx. 50 m³/year * Specification of contaminants: Any material other than wood, wood pieces larger than 12 mm. Throughput capacity is highly dependent on material. Stated values are averages. Depending on mixing ratio, moisture content, and material properties! Application not or not fully specified/disclosed. Machine is sold appropriately and solution-oriented by a specialist dealer. If heat builds up due to blockages, operating time may be drastically reduced. Availability: short-term Stock location: Solingen

Leto izdelave: 1996, Stanje: rabljeno, Schütte SF 26S DNT Year of manufacture: 1996 Godji Hb Szepfx Ab Tsuk Control: Siemens 840C Number of spindles: 6 Max. bar diameter [mm]: 26 Bar loader magazine: Cucchi BLT Multi-6 (year 2015) Positions I + III + IV + VI: Longitudinal and cross slides Positions II + V: CNC slides Feed in position VI Pick-off device in position VI Coolant system Ruez hinge belt conveyor integrated in machine bed Knoll hinge belt conveyor 280 S-1/40 ID 26565 (external) Electrostatic separator ISI RON/A 2500A, ID 26295

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 5.650 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 243-0011, CNC SWISS-TYPE AUTOMATIC LATHE TORNOS EVODECO 16/10 with LNS bar loader Fanuc 31iB - 5646 hours Country of manufacture: CH Voltage: 400V Dimensions: 2135 x 1250 x 2114 mm Net weight: 2700 kg Gujdpfxskhnqgs Ab Tek TECHNICAL DATA Number of axes: 10 Number of spindles: 2 Main spindle Max bar diameter: 16 mm Max machining length: 180 mm Spindle speed: 12,000 rpm Spindle power: 15.8 kW C-axis indexing accuracy: 0.001° Sub spindle Max bar diameter: 16 mm Spindle speed: 12,000 rpm Spindle power: 15.8 kW C-axis indexing accuracy: 0.001° Tool set 1 Number of stations: 5 Number of driven stations: 3 Driven tool speed: 8,000 rpm Tool set 2 Number of stations: 5 Number of powered stations: 3 Driven tool speed: 8,000 rpm End unit Number of stations: 4 Number of powered stations: 3 Driven tool speed: 8,000 rpm Counter operations Number of stations: 6 Number of driven stations: 6 Driven tool speed: 8,000 rpm Electrical supply Mains voltage: 400V All technical data is provided without obligation and is subject to errors or prior sale.

Stanje: rabljeno, Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0506, Krmiljenje FANUC 18i-TB Maks. premer palice: 32 mm Maks. hodil vretena: 310 mm Hitrost vretena: 350 - 7.000 obr/min Maks. premer palice pri proti-vretenu: 32 mm Maks. hitrost proti-vretena: 350 - 7.000 obr/min Število uporabnih orodij: 21 Stružniška orodja v večnožnem držalu: 6 Pogonska orodja za prečno obdelavo: 3 Čelno vrtalno orodje: 4 Zadnje vrtalno orodje: 4 Zadnja obdelava: 4 Hitrost pogonskih orodij: 5.000 obr/min Guedpfx Ajxgnvdjb Tjk Podajalnik palic FMB turbo 3-36

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, obratovalne ure: 2.963 h, Funkcionalnost: popolnoma funkcionalen, DONNÉES TECHNIQUES - Nombre de broches : 2 BROCHE PRINCIPALE - Diamètre maximum de la barre : 42 mm - Course de déplacement : 100 mm - Vitesse de broche : 6 000 tr/min - Puissance moteur de broche : 7,5 / 5,5 kW - Résolution minimum de l’axe C : 0,001° CONTRE-BROCHE - Diamètre maximum de la barre : 34 mm - Vitesse de broche : 5 000 tr/min - Puissance moteur de broche : 5,5 / 3,7 kW - Résolution minimum de l’axe C : 0,001° - Nombre de tourelles : 2 TOURELLE SUPÉRIEURE - Nombre de positions : 8 - Course X : 140 mm - Course Z : 235 mm - Course Y : 70 mm (+/-35 mm) - Vitesse des outils entraînés : 5 000 tr/min - Puissance des outils entraînés : 1,0 kW TOURELLE INFÉRIEURE - Nombre de positions : 6 Gjdpfx Abjw Igyro Touk - Course X/Z : 140 / 310 mm ALIMENTATION ÉLECTRIQUE - Puissance totale requise : 30 kVA POIDS ET DIMENSIONS - Encombrement : 2 220 x 1 460 mm - Hauteur de la machine : 1 700 mm - Poids de la machine : 3 100 kg

Stanje: pripravljen za uporabo (rabljen), With hydraulic pump. Gedshw E D Sopfx Ab Touk

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, obratovalne ure: 901 h, Funkcionalnost: popolnoma funkcionalen, Steuerung HAAS (15 inch LCD Bildschirm, USB, 1 Mb Programspeichern, Ethernet, IQS, VPC) Futterdurchmesser D210 mm Umlaufdurchmesser 419 mm Max. Drehdurchmesser D279 mm Max. Drehlaenge 406 mm X Verfahrweg 305 mm Y Verfahrweg +/-51 mm Z Verfahrweg 406 mm Spindelbohrung D88,9 mm Stangendurchlass max. D64mm C Achse 0,01 Grad Spindeldrehzahl 4000 U/Min Spindelende A2-6 Drehzahl der Fraesspindel 6000 U/Min Eilgaenge X/Y/Z = 12 / 12 / 30,5 M/Min. Antriebsleistung 14,9 kW Revolver Hybrid 6 x BOT / 6 x VDI40 - 12-fach Reitstockkegel MK3 Reitstochhülse D95 mm Reitstockweg 508 mm Anschlusswert 400V, 40A Gewicht 3600 Kg Abmessungen LxBxH = 3200 x 1540 x 1803mm Zubehör, Ausstattung - C Achse programierbar - Y Achse Godsxylx Njpfx Ab Touk - Angetriebener Werkzeugrevolver (alle Stationen) - Eingebauter Werkzeugmessarm - Spaeneförderer - 3 Backenfutter D210 mm - Reitstock - Makros und Softwareoptionen - Reitstock The Maschine ist in einem neuwertigen Zustand und kaum benutzt (nur 900 Stunden Vorschubszeit).

Stanje: rabljeno, Leto izdelave: 2015, Technical Details: Gsdpfetwgltsx Ab Tsuk Turning diameter: 20 mm Item: CNC automatic lathe Manufacturer: Tornos Model: Sigma 20/6 Year of manufacture: 2015 CNC axes: 6 Very good technical condition – currently in production Equipped with bar feeder The machine features 6 numerically controlled axes and driven tools operating with both the main spindle and the counter spindle. For more information and photos, please contact us via email (at) or *

Leto izdelave: 2025, Stanje: novo,

Stanje: novo, ESP Spray Cleaning Machines Gedod Hbp Aepfx Ab Teuk The ESP series is designed for efficient cleaning of industrial parts using hot pressurized water and biodegradable detergents. These machines feature very low operating costs and low consumption. The machine frame and body are made from high-grade, corrosion-resistant stainless steel. ESP machines are the optimal choice for removing oil, grease, and production residues from part surfaces, as well as for corrosion protection applications. The ESP range comes standard with a stainless steel pump, spray nozzles, heating elements, and a motorized basket construction. On request, these machines can also be equipped with a drying blower. Spray cleaning system for small to medium batch sizes, suitable for workshops, maintenance, or intermediate cleaning. Cleaning with hot water; spray cabin as top-loader. Depending on model: basket diameter 820–1250 mm, load capacity 80–300 kg, spray pressure 1.8–3.5 bar, heating 4.5–12 kW. Optional features: thermostat 0–90°C, timer, oil skimmer, filtration, loading and unloading trolley.