TORNOS DECO 10e

TORNOS DECO 10e

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Premer palice (maks.): 10 mm, število osi: 7, This TORNOS DECO 10e was manufactured in 2007. It is a Swiss-made lathe featuring a sliding headstock, direction-dependent spindle stop, and multiple tool holders for versatile operations. The machine includes an independent counter spindle, lubrication device, and drum magazine. It is ideal for precision turning tasks, offering a bar capacity of 10 mm. Take the opportunity to acquire this Swiss TORNOS DECO 10e lathe. Contact us for further information. 2 similar units available! Cgjdpfxex D Dmmo Agtet Additional information: • Sliding headstock • Direction-dependent spindle stop S1 • Cross slide with 4 tool holders T11-T24 with vertical and horizontal traverse • Independent counter spindle • Swivelling workpiece holder on the counter spindle • Lubrication device for guide bushing with filter • 3 presettable turning tool holders • Motorization S2 • Thread cutting device for ESX 12 collet • 4 fixed tool holders • Drum-type bar loader • Integrated 25-liter hydraulic unit with filter • Front and rear support legs, center height 1100 mm • "HYBRIDE 10+5" drum with 14 guide tubes for 1-4 mm bars and 14 guide tubes for 4.1-10 mm bars, no bar preparation required up to 8 mm • Electrical control cabinet • Motor voltage 400 V • Control voltage 24 V • Max turning diameter 10 mm Optional: Comprehensive set of measuring instruments Technical specification: Counter spindle: Yes

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Traub TNL 18-7B CNC Automatic Lathe Base Machine: 2441 x 1396 mm Weight: 3800 kg Spindle Height Above Floor: 3800 mm Connected Load: 24 kW Main Spindle Max. Bar Capacity: 18 mm Max. Speed: 12,000 rpm Corner Speed: 5,000 rpm Z-axis Stroke: 205 mm Rapid Traverse: 40 m/min Measuring System Resolution Z: 0.001 mm Feed Force: 3000 N Spindle Nose / Short Taper: Traub short taper interface Max. Clamping Force: 1400 daN Max. Clamping Pressure: 40 bar Min. Clamping Pressure: 7.5 bar Piston Area: 40 cm² Total Cylinder Stroke: 5 mm Draw Tube Thread: M25 x 1 Counter Spindle Workpiece Diameter: 21 mm Clamping Depth Workpiece: 180 mm Max. Speed: 12,000 rpm Travel: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid Traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Max. Clamping Pressure: 30 bar Cgjdpfx Agewg Takstet Min. Clamping Pressure: 10 bar Upper Tool Turret with B-axis Number of Stations: 8 Shank Cross-section, Turning Tool: 16 x 16 mm Travel: X: 120 mm Y: -25/+40 mm Z: 250 mm Rapid Traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Tool Change Time: 0.5 sec Measuring System Resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Lower Tool Turret Number of Stations: 7 + counter spindle Shank Cross-section, Turning Tool: 16 x 16 mm Travel: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid Traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Tool Change Time: 0.5 sec Measuring System Resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Driven Tools for Upper Tool Turret Number of Driven Stations: Max. 8 Drive Power: 2 kW Max. Speed: 12,000 rpm Torque: 3.9 Nm Driven Tools for Lower Tool Turret Number of Driven Stations: 7 + counter spindle Drive Power: 3.4 kW Max. Speed: 12,000 rpm Torque: 7.3 Nm Driven Tools for Rear Unit Number of Stations: 7 Number of Drivable Stations: Max. 3 Station Pitch: 46 mm Drive Power: 2 kW Max. Speed: 7,500 rpm Torque: 4.7 Nm Drive Power: 2 kW Max. Speed: 4,000 rpm Torque: 11.8 Nm SCOPE OF SUPPLY Includes (not exhaustive): Traub CNC Lathe Tool holders, driven and non-driven High-pressure and belt filter system Oil mist separator Fire suppression system Chip conveyor Bar loader Operating documentation Exact scope of supply as per photo documentation No guarantee is given for the correctness, completeness or timeliness of the information provided.

Stanje: rabljeno, TECHNICAL DATA - Number of Axes: 10 - Number of Spindles: 2 MAIN SPINDLE - Max. Bar Diameter: 16 mm - Max. Machinable Length: 184 mm - Spindle Speed: 10,000 rpm - Minimum C-Axis Resolution: 0.1° SUB SPINDLE - Max. Bar Diameter: 16 mm - Spindle Speed: 10,000 rpm - Minimum C-Axis Resolution: 0.1° TOOL HOLDER 1 - Number of Positions: 5 - Number of Driven Positions: 3 - Driven Tool Speed: 8,000 rpm TOOL HOLDER 2 - Number of Positions: 5 - Number of Driven Positions: 3 - Driven Tool Speed: 8,000 rpm FRONT UNIT - Number of Positions: 4 - Number of Driven Positions: 4 - Driven Tool Speed: 8,000 rpm SUB MACHINING - Number of Positions: 6 - Number of Driven Positions: 3 - Driven Tool Speed: 8,000 rpm ELECTRICAL SUPPLY - Supply Voltage: 400 V - Total Power: 14 kVA MACHINE HOURS Cgodpsuhhp Ssfx Agtjt - Operating Hours: 54,035 h ACCESSORIES - Control: Fanuc PNC DECO - Driven tool drive at: S2, S3, S5, S6 - Driven guide bushing - Parts catcher - Coolant tank * with high-pressure pump - Bar feeder: IEMCA GENIUS 118 / 32LL - Coolant container: MARKSA CSW 200 - Fire extinguishing system * NB: Functionality not guaranteed. Must be checked by a qualified third party authorized by the buyer. - Number of driven tool holders: 3

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 32 mm - Travel (Z-axis): 310 mm - Spindle speed: 7,000 rpm - Spindle drive power: 7.5 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 32 mm - Spindle speed: 7,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.001° BUSH HOLDER 1 - Number of positions: 11 - Number of powered positions: 5 - Driven tool speed: 5,000 rpm - Driven tool power: 1.2 kW FRONT TOOL POST - Number of positions: 4 COUNTER OPERATIONS - Number of positions: 4 - Number of powered positions: 4 ELECTRICAL SUPPLY - Supply voltage: 200 V - Total power: 6.2 kVA WEIGHT AND DIMENSIONS - Required floor space: 2,711 x 1,275 mm - Machine height: 1,705 mm MACHINE HOURS - Operating hours: 18,436 h - Spindle hours: 14,949 h ACCESSORIES - CNC control: Fanuc 32i-B - 3-color status signal lamp - Driven guide bushing - Coolant tank Csdpfx Agoyxr Uqotegt - Bar feeder: FMB TURBO 3-36 - Part ejector - Part extraction - Parts conveyor belt - Fire extinguishing system * NOTE: Functionality not guaranteed. Must be inspected by a qualified company appointed by the buyer. - Electrical transformer

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 25.4 mm - Max. machining length: 200 mm - Spindle speed: 10,000 rpm - Minimum C-axis resolution: 0.1° SUB SPINDLE - Max. bar diameter: 20 mm - Spindle speed: 10,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.1° - Number of toolholders: 2 TOOLHOLDER 1 - Number of stations: 5 TOOLHOLDER 2 - Number of stations: 5 - Number of driven stations: 4 - Driven tool speed: 8,000 rpm FRONT TOOL POST - Number of stations: 4 - Number of driven stations: 4 - Driven tool speed: 6,000 rpm BACK MACHINING - Number of stations: 7 - Number of driven stations: 3 - Driven tool speed: 8,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V Cgodpfx Aouha Ugogtjt - Total power: 14 kW WEIGHT AND DIMENSIONS - Floor space required: 2270 x 1650 mm - Machine height: 2200 mm - Machine weight: 3,500 kg MACHINE HOURS - Operating hours: 80,490 h EQUIPMENT - Control system: Fanuc - Driven tool motorization at: S2, S3, S5, S6 - Driven guide bushing - Parts catcher - Parts ejector - Chip conveyor - Coolant tank * with high-pressure pump - Bar feeder: ROBOBAR SBF 532 - Oil mist extraction - Coolant reservoir

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Citizen R07-VI CNC stružnica za dolge obdelovance Letnik 2015, v zelo dobrem stanju, letno vzdrževanje izvajano od začetka Na voljo sta 2 identični stroji, oba takoj dobavljiva Krmiljenje: Fanuc Največji premer obdelave: 7 mm Cedpoyk Iv Tofx Agtegt Število servo osi: 6 (Z1/X1/Y1/X2/Y2/Z2) Število C-osi: 2 (glavno in nasprotno vreteno) Število držal za orodja: 5x držalo za struženje / 2x gnano orodje / 3x vrtalne postaje spredaj in zadaj Vključno z dodatno opremo: Podajalnik palic Iemca Elite 112 EVO Visokotlačna naprava Büchele SFB-100 Protipožarni sistem Kraft und Bauer

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 8 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 25.4 [mm] - Max. machining length: 200 [mm] - Spindle speed: 10,000 [rpm] - Minimum C-axis resolution: 0.1 [degrees] SUB SPINDLE - Max. bar diameter: 20 [mm] - Spindle speed: 10,000 [rpm] - Spindle drive power: 3.7 [kW] - Minimum C-axis resolution: 0.1 [degrees] - Number of tool holders: 2 TOOL HOLDER 1 - Number of positions: 5 TOOL HOLDER 2 - Number of positions: 5 - Number of driven positions: 4 - Driven tool speed: 8,000 [rpm] BACK WORKING - Number of positions: 7 - Number of driven positions: 3 - Driven tool speed: 8,000 [rpm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total power consumption: 14 [kW] WEIGHT AND DIMENSIONS - Footprint: 2270 x 1650 [mm] - Machine height: 2200 [mm] - Machine weight: 3500 [kg] MACHINE HOURS - Power-on hours: 46,571 [hrs] EQUIPMENT/ACCESSORIES - Control: Fanuc - Drive for driven tools on: S2 - Driven guide bushing - Parts catcher Codpfx Agouhaycstjgt - Parts ejector - Chip conveyor: KNOLL - Coolant tank * with high-pressure pump: 100 [bar] - Bar feeder: TORNOS ROBOBAR SSF - Oil mist extractor: Elbaron - Fire extinguishing system * * NB: Functionality not guaranteed. To be checked by a qualified company on the buyer's side.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, A rotary transfer machine for the production of ball sockets is available. Processing stations: 13, bar feeder: 0433, bar feeder length: 3000 mm, machine power: 40 kW, control system: Hydromat. Includes Bosch hydraulic unit, Knoll 450K-1 chip conveyor, Müller CL206-B coolant processing, and separate Knoll chip disposal. In 2015, the machine was upgraded with SW milling. Documentation available. On-site inspection is possible. Cjdpfx Aou T Rg Rogtegt

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Max. workpiece diameter: 25 mm, max. workpiece length: 100 mm, max. bar diameter: 25 mm, max. X/Z travel: 42 mm / 50 mm, rapid traverse: 40 m/min, number of spindles: 6, spindle speed: 12,000 rpm, control: Siemens 840D Powerline. Cgodpfxstqfq Uo Agtst

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 7 Cgedpfjxlum Hsx Agtst - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 mm - Max. machinable length: 205 mm - Spindle speed: 10,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 20 mm - Spindle speed: 8,000 rpm - Spindle drive power: 2.2 kW - Minimum C-axis resolution: 1° - Number of tool holders: 1 TOOL HOLDER 1 - Number of positions: 10 - Number of driven positions: 4 FRONT TOOL POST - Number of positions: 7 SUB OPERATION - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 8,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 7 kW WEIGHT AND DIMENSIONS - Footprint: 2200 x 1200 mm - Machine height: 1700 mm - Machine weight: 2200 kg MACHINE HOURS - Power-on hours: 27,854 h - Operating hours: 20,213 h - Spindle hours: 13,158 h EQUIPMENT - Control: Fanuc 30i-model A - HFT (High Frequency Turning) - Driven guide bushing - Parts catcher - Parts conveyor - Parts ejector - Coolant tank - Bar feeder: FMB turbo 3-26 / 3200 A