TORNOS DECO 10e

TORNOS DECO 10e

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Premer palice (maks.): 10 mm, število osi: 7, This Tornos DECO 10e was manufactured in 2010. It is a Swiss turning machine featuring a sliding headstock, direction-dependent spindle stop, and an independent sub-spindle. The machine comes equipped with a drum-type bar feeder and an integrated 25-liter hydraulic unit. This machine is ideal for precise small-batch turning and supports bar diameters from 1 to 10 mm, up to 8 mm without preparation. Contact us for more information on this machine. Additional Information • Electrical control cabinet • Cross-slide with 4 tool holders T11-T24 with vertical and horizontal movement • 3 presettable turning tool holders • 4 fixed tool holders • Thread cutting attachment for ESX 12 collet Hfodpfx Abex D Dnde Ejd • Sliding headstock • Independent sub-spindle • Pivoting workpiece holder on the sub-spindle • Lubrication device for guide bush with filter • Drum-type bar feeder • Integrated 25-liter hydraulic unit with filter • Front and rear support feet, center height 1100 mm • "HYBRIDE 10+5" drum with 14 guide tubes for 1-4 mm bars and 14 guide tubes for 4.1-10 mm bars without bar preparation up to 8 mm • Motor voltage 400 V • Control voltage 24 V • Drive motor n = 12,000 rpm Optional: Comprehensive package of measuring devices Technical Specification Counter Spindle: Yes

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Max. workpiece diameter: 25 mm, max. workpiece length: 100 mm, max. bar diameter: 25 mm, max. X/Z travel: 42 mm / 50 mm, rapid traverse: 40 m/min, number of spindles: 6, spindle speed: 12,000 rpm, control: Siemens 840D Powerline. Hodetqfq Uepfx Ab Eefd

Stanje: dober (rabljeno), Multi-spindle automatic turning machine Tornos SAS 16 6.6 Hfjdowh Snvspfx Ab Ejd Condition: Very good Machine description: Automatic lathe with sliding headstock Manufacturer: Tornos Model: SAS 16 6.6 Condition: good (used) 2 units of Tornos SAS 16 6.6 automatic lathes Including 1 machine equipped with NC slide

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 9 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 3.7/5.5 [kW] Hfsdpfxjuhbdio Ab Esd - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 20 [mm] - Spindle speed: 12,000 [rpm] - Spindle drive power: 3.7 / 5.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] - Number of turret heads: 1 LOWER TURRET HEAD - Number of positions: 12 - Travel path X/Z: 90x65 [mm] - Travel path Y: 50 [mm] - Number of bush holders: 2 BUSH HOLDER 1 - Number of positions: 10 - Number of driven positions: 4 - Travel path X/Y: 90 / 319 [mm] FRONT DEVICE - Number of positions: 12 - Travel path X/Z: 215x305 [mm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] WEIGHT AND DIMENSIONS - Footprint: 2000x1280 [mm] - Machine height: 1,720 [mm] - Machine weight: 3,600 [kg] MACHINE HOURS - Power-on hours: 23,167 [h] ACCESSORIES - Control unit: Fanuc 31i-B - Interface: Ethernet / RS232 / USB / PCMCIA - 3-color status light - Powered guide bushing - Part removal unit - Parts ejector - Coolant tank - Bar feeder: Iemca Elite 220 (2010) - Fire extinguishing system* NB: Functionality not guaranteed. To be checked by a qualified company of the buyer.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2410, Year 2001 with Fanuc Deco and 10 axes Fully checked and partially overhauled as per report. Country of manufacture: Switzerland Net weight: 1,500 kg Customs tariff number: 8458.11 20 Dimensions: 1650 x 1050 x 1850 mm TECHNICAL SPECIFICATIONS (standard version) Hfedsw T Tfropfx Ab Ejd Headstock (Z1 axis) (+C axis optional) Maximum bar capacity: ø 10 mm Maximum part length, depending on collet type: 60/90 mm Programmable spindle speed: 0–16,000 rpm Positioned and indexed stop, increment: 0.1° Maximum spindle power: 1.1 (3.7) kW Tool post (X1/Y1) (X2/Y2) Number of turret tools (2 slides; 2 x 2 axes): 2 x 4 Tool section: 8 x 8 mm Number of cross drilling/milling tools: 4 Programmable rotation speed: 0–12,000 rpm Front working device (X3/Y3) Maximum number of front tools: 3 Programmable rotation speed: 0–12,000 rpm Sub-spindle and secondary operations (X4/Z4) (+C optional) Maximum clamping capacity: 7 mm Programmable rotation speed: 0–16,000 rpm Positioned and indexed stop; increment: 0.1° Maximum number of secondary operations: 4 Number of fixed or live spindles: 4 Maximum spindle rotation speed: 9,000 rpm Tornos-Bechler/Fanuc dedicated CNC Type of processor: 486 DX2 Number of simultaneous axes: 10 Machine versions: 9 axes + C axis on main spindle and/or C axis on sub-spindle All technical data provided without guarantee of accuracy or completeness.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, proizvajalec krmilnikov: FANUC, model krmilnika: 16i-TB, This TORNOS DECO 10a was manufactured in 2006. It features an integrated bar feeder with a maximum bar length of 3.2 m and a bar capacity ranging from 2 to 10 mm. The machine is equipped with a Robobar SSF 3m loading magazine and a FANUC 16i-TB control system, ensuring precise and efficient operation. Ideal for complex Swiss-type turning operations. Contact us for further information about this machine. 2 similar machines available! Hodpox D Dlijfx Ab Ejfd Additional Information • Maximum bar length: 3200 mm • Bar capacity: Minimum 2 mm, Maximum 10 mm • Maximum diameter without preparation: 8 mm (without collet) • Motor voltage: 400 V • Control voltage: 24 V • Independent sub spindle (S4) • FANUC 16i-TB control system • 1 cross slide with 4 tool holders • Tool breakage detection sensor • Center height: 1100 mm • Automatic and integrated bar loader with oil bath • Robobar SSF 3m loading magazine • Front and rear support foot • “HYBRID 10+5” drum with 14 guide holes for 1-4 mm bars and 14 guide holes for bars 4.1-10 mm; up to 8 mm bar diameter without bar preparation • Electrical control cabinet • Integrated 25-liter hydraulic unit with filter • Movable headstock • Oriented spindle stop Optional: Comprehensive set of measuring instruments

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 6 - Maximum bar diameter: 20 [mm], 25 [mm] as option - Number of cross slides: 4 - Maximum feed length: 100 [mm] - Spindle speed: 420 - 5000 [rpm] - Indexing time: 0.7 [s] - Machining time: 1.4-60 [s] - Power: 11 [kW] - Dimensions: 5800 x 1500 [mm] - Weight: 6000 [kg] EQUIPMENT - 4 cross slides at positions 1, 2, 4, and 5 - 1 chip conveyor - 5 drills Hedpfxsuharro Ab Eofd - 1 bar feeder: IEMCA PRA41/31/P

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Proizvajalec: TORNOS Tip: DECO 2000/07 Leto: 1996 Št. stroja: T 62136 Država: Švica Specifikacije: Največ v vpenjalni čeljusti: 7 mm Krmiljenje FANUC 16 T-B Števec ur, stroj prižgan: 24.095 ur Opremljen z: Vpenjalni nastavek Magazin za palice Hjdoxq D Svjpfx Ab Eofd Popolna C-os Prijemalo za obdelovance Nosilci za orodja Sistem za hlajenje Ključi za upravljanje itd.

Stanje: dober (rabljeno), Leto izdelave: 2006, CNC Swiss-Type Automatic Lathe Citizen Cincom M16 Technical Data Year of manufacture: 2006 Max. machining diameter: ø16 mm Max. machining length: 200 mm per chucking Max. diameter for frontal drilling: ø6 mm Max. diameter for frontal thread cutting: M6 Spindle bore diameter main spindle: ø16 mm Main spindle speed: 200 to 10,000 rpm C-axis main spindle: 0.001° Max. collet diameter sub-spindle: ø16 mm Max. rear machining length: 125 mm Max. part projection sub-spindle: 25 mm Max. drilling diameter rear machining: ø5 mm Hfedpfx Aex Emnrsb Esd Max. thread cutting diameter rear: M5 Sub-spindle speed: 200 to 10,000 rpm Tool holder group: max. drill diameter ø5 mm max. thread cutting diameter M4 Spindle speed: 200 to 8,000 rpm Turret: max. drilling diameter ø5 mm max. thread cutting diameter M5 Spindle speed: 200 to 6,500 rpm Number of mountable tools: up to 21+α Axis feed rates: 20 m/min Minimum input increment: 0.001 mm Axis travels: X1 60.5 mm Y1 208 mm Z1 205 mm X2 107.5 mm Z2 133 mm X3 195 mm Z3 280 mm Main spindle motor power 2.2 kW Sub-spindle motor power 0.75 kW Driven tool spindles: 0.75 kW The Citizen Cincom M16 is a high-precision CNC Swiss-type automatic lathe designed for demanding series production of small and precision parts. With a machining diameter up to ø16 mm, machining length up to 200 mm, and high spindle speeds up to 10,000 rpm, this machine is ideally suited for complex machining operations. The integrated C-axes in both main and sub-spindles enable precise positioning and sophisticated milling and drilling operations. The machine offers ample tool capacity with up to 21 tools and several driven tool stations, allowing even complex machining processes to be carried out in one setup. Generous axis travels and precise feed values of 0.001 mm support the highest production quality with minimal tolerances. The scope of supply includes an LNS Express-220 bar feeder from 2011, which enables automated material loading, significantly increasing productivity and process reliability. Various tool holders are also included in the package. The machine is robustly built and designed for continuous industrial use – ideal for producing watch, medical, electronic, or automotive components. No liability is assumed for the correctness, completeness or currentness of the information provided.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Premer palice (maks.): 10 mm, število osi: 9, This TORNOS DECO 10a was manufactured in 2010. It features a movable headstock, direction-dependent spindle stop, and cross slides with tool holders. It is equipped with an independent counter spindle, a pivoting workpiece holder, and a lubrication device. The machine also includes a bar loader, an integrated hydraulic unit, and an electrical control cabinet. If you are looking for a high-quality turning machine, you should consider the TORNOS DECO 10a we have for sale. Contact us for more information. Additional Information • Cross slides with 4 tool holders T11-T24 with vertical and horizontal movement • 3 presettable turning tool holders Hfodpfx Abox D Dmtj Eed • 4 fixed tool holders • Movable headstock • Direction-dependent spindle stop S1 • Independent counter spindle • Pivoting workpiece holder on the counter spindle • Lubrication device for guide bush with filter • Thread cutting device for collet chucks ESX 12 • Drum-type bar loader • Integrated 25-liter hydraulic unit with filter • Support foot front/rear, center height 1100 mm • "HYBRIDE 10+5" drum with 14 guide tubes for 1-4 mm bars and 14 guide tubes for 4.1-10 mm bars, without bar preparation up to 8 mm • Electrical control cabinet • Motor voltage 400 V • Control voltage 24 V Optional: Comprehensive measuring device package Technical Specification Counter Spindle: Yes