Stroj za preizkušanje razpok

TIEDE Universal 600 WE

Leto izdelave: 2020, Stanje: novo, Touch to delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter connector), or manual. Filter connector sensor The cabins are fitted with a sensor that detects when the filters are clogged and need to be cleaned. The system also notifies when filters are already in use. Automatic filter cleaning The electronic automatic filter cleaning system controls the frequency and timing of cleaning. Each filter is cleaned individually; the filters can also be cleaned manually using presses. We know from experience that it's difficult to rely on the operator to clean the filters. Thanks to this system, the operator does not need to stop production. Low noise level Nedpfx Aefz I Ehsdpswp Aluminum fans operate very quietly, with sound levels between 74-79 dB, which is sufficiently low. Even with the standard cabin design, it is hard to have a conversation nearby. Boiler through the cabin The cabin with overhanging squirrel-cage fans improves work efficiency, reducing the need for painters to move the fans manually. Pre-book construction The other cabins are designed to prevent the build-up of explosive mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Stanje: novo, Leto izdelave: 2018, For sale is an unused Rösler FKS 35 Tandem with soundproof cabin, manufactured in 2018. The system is still in its original packaging and available from our warehouse. You are welcome to arrange a viewing appointment on site after prior telephone consultation. Nodpfsl D Ex Dox Adpewp

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Hainbuch centroteX Quick Change System (Year 2019) • 2x centroteX M machine adapters (A037017.0382B): o Short taper size: KK8 o Draw tube connection: M85x2 o Length: 53 mm o Bore: 78 mm • 1x TOPlus mini Axfix size 65 (A038531.0015C) o Item no.: 10000678 o Length: 136 mm • 1x TOPlus mini Axzug size 65 (A038530.008C) o Item no.: 10000676 o Length: 134.5 mm • 1x Hainbuch (HWR) InoFlex VT026 – 4-jaw chuck o Length: 179 mm Nwedpfsv Ivakjx Adpop o Diameter: 210 mm • 1x Forkardt 3-jaw chuck (3QLC 250-72 Z8-S12) o Length: approx. 155 mm o Diameter: 257 mm • 1x monteq quick change system (A012708.0009B) • 1x Roll container D400 o Storage for the 4 listed clamping devices o monteq change system + Tiger crane hook mounted on the side • Operating instructions/manuals • 1x toolbox with accessories Accessories: • Clamping head TOP65 (serrated, for raw material): o 1 pc. each → d12, 20, 30, 36, 40, 50, 55, 60, 65 mm • Clamping head TOP65 (hexagon): o 1 pc. each → SW36, 45, 46, 50 • Clamping head TOP65G (smooth): o 1 pc. each → d8, 10, 12, 14, 15, 16, 17, 18, 20, 22, 23, 24, 25, 26, 27, 28, 30, 32, 33, 34, 35, 36, 39, 40, 42, 44, 45, 46, 50, 54, 56, 60, 62, 64, 65 mm o 2 pcs. → d38 mm • 1x extraction ring for clamping head 65 • Total of 50 clamping heads • Accessories for jaws: o for HWR 4-jaw chuck:  1 set of reversible jaws  3 sets of claw jaws o for Forkardt 3-jaw chuck:  1 set of hard reversible jaws o Various T-nuts and bolts o Various distance studs for jaws (to adjust clamping length for material) • Various soft jaws (2 pallets)

Stanje: zelo dobro (rabljeno), Buderus Logano SK735 - 830 kW, 6 bar Betriebsdruck, auch mit 1200 und 1400 kW erhältlich Nodpfx Adjhtf Dkspswp

Stanje: pripravljen za uporabo (rabljen), Operates using the magnetic particle inspection method, includes documentation and accessories, on-site inspection is possible. Nwedpsq Npf Usfx Adpep

Leto izdelave: 2018, Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: H3000TM, Universal Testing Machine H3000TM Made in Germany Crosshead travel: 520 mm Working space depth: 66 mm Total height: 1010 mm Weight: 45 kg Test speed: 1 to 500 mm/min Return speed: 500 mm/min Travel resolution: 0.01 mm We offer a very large selection of clamping tools: screw clamps, wedge grips, pneumatic and hydraulic grips. Njdpfxst Rg H As Adpowp Pressure plates, bending fixtures, friction coefficient fixtures, and much more. Extensometers, long-travel transducers, clip-on gauges, climate chambers. Load cells (selectable): 50 N, 100 N, 200 N, 500 N, 1000 N, 2000 N, or 3000 N Includes Hess software for Windows 8, 9, 10, or 11 for universal test procedures; simple tests can also be performed without a PC. Includes one 5 kN SP 56g screw clamp with pyramid or rubber jaws, 30x50 mm. Factory calibration certificate with DAkkS-calibrated measuring equipment. Calibration in both tension and compression in 10 steps. The H3000TM series universal testing machine is a single-spindle machine with a robust construction made from aluminium and V2A stainless steel, featuring ball screw drives, linear ball bearings, and toothed belt drive. The bellows cover protects the spindle and guides. The testing machine is microprocessor-controlled and features a membrane keypad. The two-line LCD display shows both force and travel. The testing machine can be used either as a standalone unit or with a PC via USB interface. Travel measurement is by encoder, with 0.01 mm visible resolution on the LCD (internal resolution 0.0001 mm). The machine comes with a standard load cell with 0.03% linearity and corresponding calibration. Optionally, a second channel for an additional load cell or displacement transducer can be added. The universal testing machine is available with two different travel lengths, 500 mm or 1200 mm (measured without load cell and test fixture). Scope of delivery: One load cell of your choice (50 N, 100 N, 200 N, 500 N, 1000 N, 2000 N, or 3000 N), certificate, 220 V power cable, USB cable, manual, and CE declaration of conformity. Load Cell 3000N Measuring range: 1–3000 N (tension and compression), nominal 2 mV/V output signal Overload protection: +/-100% Linearity: +/-0.05% Hysteresis: +/-0.03% Repeatability: +/-0.02% Including 1.5 m connection cable and calibration certificate.

Leto izdelave: 2000, Stanje: rabljeno, x-travel 1000 mm y-travel 1600 mm z-travel 800 mm Control system: WENZEL WPC 2040/FW31.351 Total power requirement: kW Machine weight approx. 5500 kg Nedpjt Hw Nyjfx Adpewp Required space approx. m WENZEL CNC-controlled vertical 3-D coordinate measuring machine Model: LH 108 CNC Year of manufacture: 2000 (continuously serviced and calibrated by manufacturer) Y-axis as longitudinally movable measuring portal: 1,600 mm X-axis as transverse measuring head carriage: 1,000 mm Z-axis as vertical measuring spindle: approx. 800 mm Max. workpiece weight / table load: approx. 2,250 kg Clearance under measuring portal: approx. 900/1000 mm Overall table size: approx. 2,600 x 1,250 mm Table height above floor: approx. 700 mm Table plate thickness: 380 mm Machine height: approx. 3,100 mm Weight: approx. 5,500 kg Special Equipment / Accessories: • Measuring table, crossbeam, and spindle made of dark natural hard stone; table with 6 x 9 threaded holes for securing workpieces/fixtures • All axes are air-bearing, making them easy to operate, virtually wear-free, and equipped with incremental linear scales with a resolution of 0.0005 mm • WENZEL CNC control unit Type WPC 2040 / FW31.351 built into the workstation (Control system was replaced approx. 3 years ago) • WENZEL measuring software Type METROSOFT QUARTIS R 12 SP 1 with SurfPro package and QUARTIS Q-DAS • RENISHAW motorized rotary and swivel head (automatic indexing in 7.5° steps) with measuring probe Model PH 10 M Plus and measuring probe TP 20 plus various probe accessories • RENISHAW Probe Head Controller Type PHC 10 C-3 Plus, also integrated into the workstation • Automatic probe change possible, 6-position probe magazine Model MCR 20 mounted on the table • Mobile hand control panel with progressive control lever (joystick) for manual adjustment of all 3 axes with continuously adjustable travel speeds • Reference sphere for setup on the table, workstation, various clamping devices, etc. Condition: Very good – can be inspected under power in stock, ready for demonstration, was professionally disassembled by a measuring machine specialist at previous owner and reassembled at current location. Delivery: Ex stock – as is and as inspected Payment: Net – upon receipt of invoice.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, DESCRIZIONE TECNICA Rettificatrice CNC a 6 assi per utensili EWAG Ewamatic Line. Marca: EWAG Modello: Ewamatic Line ERS - SK2000 Anno: 2002 Tipo di controllo: CNC Controllo: NUM 1050 Origine: Svizzera Peso macchina: ca. 4 t Dimensioni macchina: ca. 2365 x 2920 x 2810 mm Nwodsv Tbfpjpfx Adpop Corsi: Asse trasversale X: 360 mm Regolazione in altezza Y: 150 mm Asse di avanzamento Z: 230 mm Asse di rotazione B: +/-120° Asse di inclinazione A: -15...+25° Controtesta con funzione di rettifica cilindrica, variante di serraggio HSK63 (asse C 1000 giri/min) Torretta portamole a 6 posizioni inclinabile: Mandrini di rettifica Ø 80 mm, numero 6, disposti a stella Mole di rettifica Ø max. 250 mm Motore mandrino molatura: 7,5 kW, velocità 12.000 giri/min Stazione di misura 3D RENISHAW Dispositivo di ravvivatura per la dressatura automatica di mole diamantate e CBN Impianto di raffreddamento Completa di aspiratore per nebbie oleose Donaldson

Leto izdelave: 1987, Stanje: rabljeno, številka stroja/vozila: 7.0176, Note: We have 6 units of this machine in stock! Manufacturer: Gildemeister Type: GS 36 – 6 A/C Machine No.: 7.0176 Year of manufacture: 1987 Weight: 11 t General / Technical Data: Portal 6-spindle automatic lathe Spindle pitch circle diameter: 300 mm Number of longitudinal slides: 6 Number of cross slides: 2 Max. cross slide travel: 60 mm Max. longitudinal slide travel: 125 mm Spindle speeds: Infinitely variable 562 – 3373 rpm Main time range: Infinitely variable 1.95 – 78 sec. Nonproductive time range: 0.79 – 2.13 sec. Drive power: DC motor spindles 20 kW; feed drives 8 kW Footprint: approx. 1720 x 4700 mm Note: The machine cannot be converted for bar work. Equipment: Nwsdpfjin Ub Tjx Adpep – 1 creep feed drive for setup operation – 1 automatic central lubrication system – 1 coolant system with pipes and pump – 1 facing slide, position 3 (without cams) – 1 facing slide, position 5 – 6 longitudinal slides (without drive, without cams) – Feed for independent longitudinal slide, flexible, positions 1-6 – Programmable logic controller IPC 620 – Noise protection measures 80 dB – Automatic feed re-engagement with electric interlock on side door – Hinged belt chip conveyor – Machine version with DC drives for speed and feed – KIENZLE terminal 2450-07 with signal interface and data transmission control Accessories: Electrical configuration: The electrical equipment consists of a DC main drive with 20 kW power output for spindle drive and an AC servo motor for feed drive with 8 kW power output (protection rating IP 54), as well as the corresponding switching and control devices and necessary installation. Total connected load for the machine: 32 kW/h.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Premer kolesa - maks. 600 mm Širina kolesa 700 mm Modul - maks. 20 Modul - min. 0,5 Premer mize 300 mm x-pomik 300 mm y-pomik 600 mm z-pomik 700 mm Teža obdelovanca 300 kg Krmiljenje Zeiss Premer obdelovanca - maks. 600 mm Vpenjalna dolžina 20 - 1000 mm Maks. kot nagiba 90° Skupna priključna moč 2 kW Teža stroja pribl. 2,5 t Potreben prostor pribl. 3,0 x 2,0 x 2,4 m Stroj za merjenje oblike, stroj za merjenje zobnikov, koordinatni merilni stroj --> Primar MX 4 WL Primeren za menjalniške gredi, zobniške gredi, zobnike, bate, ohišja menjalnikov, ojnice, odmične in ročične gredi, ohišja ročičnih gredi, glave valjev ... Zračno vzmeten, centrirna in nagibna miza, podpora, zelo natančna izvedba! Nwedpfewyxycox Adpep Programsko opremo: zobnik, valjčni rezkar, bat, stožčasti zobnik, ročična gred, ojnica Nova programska posodobitev 2014!