Navpična stružnica

HESSAPP DVM 550-11

Leto izdelave: 2006, Stanje: pripravljen za uporabo (rabljen), Na voljo je CNC 5-osni stružno-rezkalni center Mazak z nasprotno glavo. Premer nihanja: 820 mm, obdelovalni premer: 820 mm, obdelovalna dolžina: 1500 mm, maks. teža obdelovanca v vpenjalni glavi/med konicama: 650 kg/150 kg, glavna vretena hitrost: 1600 vrt/min, premer vretena: 185 mm, moč: 30 kW/40 kW, sila konjička: 15 kN, iztez konjička: 1466 mm, orodje: BT50, število obratov: 10.000 vrt/min, hodi X/Y/Z: 870 mm/500 mm/1600 mm, hitri pomik: 40 m/min. Dimenzije stroja X/Y/Z: pribl. 6500 mm/3700 mm/3200 mm, teža: pribl. 26.000 kg, krmiljenje: Mazatrol Matrix. Dokumentacija je na voljo. Možen je ogled na kraju samem. Stroj se nahaja na Kitajskem. Fedpfjxf Iklsx Aa Hsgk

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 83 mm, stružna dolžina: 1.000 mm, premer struženja: 570 mm, premer struženja nad zgornjim sanežem: 340 mm, premer tulec: 80 mm, hod vretena: 200 mm, skupna masa: 3.200 kg, zunanji premer vpenjalne glave: 250 mm, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Machine is in very good condition. Available immediately! Fjdpfx Aaswxw S Is Hsgk Can be tested under power.

Stanje: rabljeno, Leto izdelave: 1979, X-hod 800 mm Y-hod 300 mm Z-hod 400 mm Območje vrtljajev 25 - 2.000 min^-1 Pogonska moč 4 kW Pomik 5 - 500 mm/min Hitri pomik 1,5 m/min Fjdswwwqhjpfx Aa Hjgk Delovna miza: 1.000 x 700 mm Vpenjalni stožec SK40 Teža 1,8 t Prostorske zahteve cca 2,50 x 2,40 x 2,00 m Stroj je v dobrem stanju Digitalni prikaz je pokvarjen (merilni trakovi delujejo) Izmenljiva rezkalna glava Brez dodatne opreme

Stanje: rabljeno, Leto izdelave: 2010, x-axis travel: 730 mm y-axis travel: 730 mm z-axis travel: 730 mm Control: Matrix Nexus Mazatrol Main spindle: Speed range – main spindle: 35 – 18,000 rpm Drive power – milling spindle: 35 / 26 kW Tool holder: ISO 40 DIN 69871A Number of gear stages: 2 Pallet changer: Number of pallets: 6 (5+1) Pallet size: 500 x 500 mm Max. workpiece weight: 700 kg Max. workpiece diameter: 800 mm Max. workpiece height: 1,000 mm Pallet change time: 7 sec B-axis (table): 0.001° Tool changer: Number of tool stations: 160 positions Tool holder: ISO 40 DIN 69871A Fsdpfx Aasup H Drs Hjgk Max. tool diameter: 95 mm Max. tool diameter with adjacent empty pocket: 150 mm Max. tool length: 420 mm Max. tool weight: 12 kg Tool-to-tool change time: 2.7 / 3.2 sec Feed rates: Rapid traverse: 60 m/min Max. feed rate: 60,000 mm/min Total power requirement: 78.5 kVA Machine weight approx.: 16.4 t Space requirements approx.: 7.5 x 3.5 x 3.0 m CNC horizontal machining center MAZAK – Nexus 5000 II - Pallet changer 6 (5+1) positions - WITHOUT tools

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 700 mm, pomik osi Y: 500 mm, pomik po osi Z: 540 mm, hitro pomikanje X-os: 48 m/min, hitri pomik os Y: 48 m/min, hitri pomik na osi Z: 48 m/min, model krmilnika: Heidenhain TNC 640, skupna višina: 29.620 mm, skupna dolžina: 32.000 mm, skupna širina: 28.480 mm, obremenitev mize: 200 kg, premer vrtljive mize: 380 mm, skupna masa: 6.000 kg, največja hitrost vretena: 12.000 obr/min, dovod hladilne tekočine: 36 letvica, Oprema: dokumentacija / priročnik, transportni trak za ostružke, Victor centrum obróbcze 5-osiowe VC-AX380 ze sterowaniem Heidenhain TNC640 5-osiowa obróbka symultaniczna z narzędziem kalibracyjnym KinematicsOpt oraz kulą kalibracyjną. Opcje standardowe: - System chłodzenia z pompą do chłodziwa wysokociśnieniowego MTH4-40/4 i przewodami zasilającymi - Obudowa pełna chłodziwa - Chłodnica oleju wrzeciona - Separatot oleju - Przenośnik wiórów spiralny - Pistolet do płukania i dmuchawa powietrzna - Narzędzia obsługowe i instrukcje Opcje dodatkowe: - Powietrze przez wrzeciono - Klimatyzator w szafie sterowniczej - Przenośnik wiórów - 40 narzędzi - 36 bar wewnętrznego doprowadzenia chłodziwa (IKZ) z dupleksem Mahle - System płukania stołu - Sonda pomiarowa detalu TS460 - Automatyczne drzwi Fgsdpfx Aajq Tafxj Hek - Interfejs - Uchwyt 3-szczękowy 8" Zdjęcia poglądowe – rzeczywisty wygląd może się różnić. Dostępne z magazynu w Bergneustadt (sprzedaż w międzyczasie zastrzeżona).

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, x-travel 14,000 mm Fsdpfx Aasvwgm He Hogk y-travel 5,000 mm z-travel 1,500 mm w-axis 3,000 mm Column clearance 4,000 mm Gantry column: Distance table – spindle nose 4,500 mm Workpiece weight 100 t Table dimensions – longitudinal 9,000 mm Table dimensions – cross 3,000 mm Spindle taper ISO SK 50 Spindle speed 2–2,500 rpm Spindle drive 113 kW Spindle diameter 200 mm Spindle torque 9,500 Nm Feed range x-axis 1–10,000 mm/min Feed range y-axis 1–10,000 mm/min Feed range z-axis 1–10,000 mm/min Rapid traverse 20,000 mm/min Height above floor 8,600 mm Control SIEMENS 840C Machine weight approx. 360 t >>> retrofit 2011

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, obratovalne ure: 1.139 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 599 mm, premer struženja: 530 mm, moč vretenovega motorja: 11.000 W, hitrost vretena (min.): 50 obr/min, največja hitrost vretena: 6.000 obr/min, izvrtina vretena: 56 mm, potovalna razdalja osi X: 530 mm, pomik osi Y: 100 mm, pomik po osi Z: 599 mm, hitro pomikanje X-os: 30 m/min, hitri pomik os Y: 15 m/min, hitri pomik na osi Z: 30 m/min, Stunning machine with potential integration for a brand new IEMCA Master 52 bar feeder, only 1,100 operating hours. Multitasking capabilities enable simultaneous milling and turning operations. The machine features a robust, high-precision cast iron frame. Double tool magazine: Revolver turret + internal magazine with 12 additional protected CAPTO tools, 12 more tools mounted on the turret, plus 6 hybrid 25 mm square holders (refer to the attached technical datasheet). Equipped with dual spindles for secondary machining operations. Controlled by Fanuc 0i-TF CNC with Manual Guide. Includes Tool Overload Detection System (automatic tool overload monitoring). Supplied with complete documentation. Also comes with transformer, chip conveyor, 15 Bar high-pressure coolant pump, tool presetting system, piece handling arm, finished parts conveyor belt, and work lamp. Fgsdpfx Aaovv Tvfo Hok

Stanje: rabljeno, Leto izdelave: 1999, Maximum wheel diameter: 280 mm Wheel width: 330 mm Module - max.: 5 Module - min.: 1 Control unit: LIEBHERR CNC Total power requirement: 28 kW Machine weight: approx. 12 t Space requirement: LIEBHERR CNC-controlled gear grinding and profile grinding machine Model: LCS 282 Year of manufacture: 1999 # 1099 ----- Max. workpiece diameter: 280 mm Module: 1 - 5 Fsdpfjt Hwu Aex Aa Hsgk Helix angle: +/- 35° Distance from table center to tool center: 15 – 285 mm Vertical grinding slide stroke: 330 mm Shifting/traversing stroke: 200 mm Minimum number of teeth: 7 Grinding spindle position above table (min./max.): 70 - 360 mm Clamping length of workpiece: 420 up to max. 620 mm Worm grinding wheel / profile grinding wheel diameter: 145 x 210 / 175 mm Speed of worm wheel/profile tool: 2,500 – 10,000 rpm Maximum table speed: 750 rpm Spindle drive: 28 kW Total drive capacity: approx. 50 kW – 400 V – 50 Hz Total weight: approx. 12,000 kg Accessories / Special Features • LIEBHERR CNC control system Type LH 90 GG, a user-friendly CNC control (B+R / IPC 5000) with gear-specific operator interface and diagnostic functions for quick troubleshooting. (Remote diagnostics possible) • Equipped with automatic threading device for positioning the grinding wheel in the tooth gap • The machine operates with three grinding processes: a. Generating grinding using CBN worm wheels = fastest processing b. Profile grinding using CBN profile grinding wheels (one or two wheels) = highest accuracy! c. Combination of a and b (most economical solution): pre-grinding with worm wheel / finish-grinding with profile grinding wheel by single part method • Automatic shifting of worm grinding wheel and automatic positioning of profile wheel • Automatic workpiece loading via a ring loader mounted on the counter column, which automatically loads and unloads raw and finished parts. Workpieces are transported to the ring loader via a separate FLEX LINK conveyor, picked up, and removed again. Thus, unmanned operation is possible. • Hydraulic workpiece clamping on the table, but without clamping device. Tailstock slide present on counter column, but without tailstock. Slide stroke up to approx. 350 mm • Completely enclosed work area with sliding door and separate CO2 fire extinguishing system/IR sensor • No original coolant system (due to central supply), and no dresser provided. Condition: good to very good – under power and ready for demonstration, compact design! Delivery: ex stock – as inspected Payment: strictly net – after receipt of invoice We appreciate your interest – over 200 gear machines constantly in stock.

Stanje: novo, Leto izdelave: 2018, For sale is an unused Rösler FKS 35 Tandem with soundproof cabin, manufactured in 2018. The system is still in its original packaging and available from our warehouse. You are welcome to arrange a viewing appointment on site after prior telephone consultation. Fgedpfx Ajl D Ex Dea Hsk

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, obratovalne ure: 2.542 h, Funkcionalnost: popolnoma funkcionalen, Kunzmann WF 4/3 Milling Machine TNC 320 Manufacturer: Kunzmann Model: WF 4/3 Milling Machine Year of manufacture: 2009 Condition: Used, from training workshop, cleaned and powered, ready for demonstration Spindle hours: 2,542 h X travel: 400 mm Y travel: 350 mm Z travel: 400 mm Tool holder: SK 40 Spindle speeds: 1,000 – 4,500 rpm Feed rates: 0 – 2,000 mm/min Quill travel: 60.0 mm Table size: 650 x 350 mm T-slots: 14 H7 Control system: TNC 320 Motor power: 5.5 kW Weight: 1,920 kg Space requirements: approx. 2,000 x 2,000 x 2,100 mm Total power requirement: approx. 7 kVA Fgedjw D D Sfepfx Aa Hjk Central lubrication Coolant system CE compliant Scope of delivery: – Technical documentation – Full safety cabin – LED machine light