Električno-hidravlični kompaktni žerjav

Zallys Just Lift 250 - 750

Leto izdelave: 2007, Stanje: dober (rabljeno), ■ V600 vrtalni stroj (premični vrtalni kabinet, opremljen z 1 horizontalno vrtalno enoto in avtomatskim menjalnikom orodij) ■ Vrtalna miza z dovodnim vodilom, dolžina 15 metrov, uporabna dolžina 12 metrov ■ Oprema in programska oprema (vključno s krmiljenjem stroja VACON 110) ■ Varnostne naprave (varnostni odbijači) ■ Leto izdelave 2007 Ledpjq Hgg Uefx Afrehp

Stanje: rabljeno, Description: Main Spindle: Technology: Belt-driven spindle with gearbox Speed: 1,000 rpm Power: 45 kW Torque: 4,008 Nm Bar capacity: 205 mm Workpiece clamping I: 3-jaw chuck, Autogrip AP-230 ø535 mm Workpiece clamping II: Manual 3-jaw chuck, Chandox SK20 (rear of spindle head) Tool Carrier (X/Y/Z): Technology: Turret with 12 stations Tool holder: BMT 75 Driven tool speed: 3,000 rpm, 7 kW, 83 Nm Travel X/Y/Z: 340/160/3,250 mm Rapid traverse X/Y/Z: 20/7/12 m/min Tailstock: Technology: Programmable quill drag-type tailstock Quill stroke: 150 mm Taper: MT5 Equipment/Accessories: Lhsdowt Iwqjpfx Afrsp Chip management: Chip conveyor Coolant management: High-pressure coolant pump (IKZ) Tool measurement: Measuring arm, Renishaw RP3 Oil mist extraction: Mechanical separator, make AR Filtrazioni ARNO 3VF YF Shaft machining: Manual steady rest, ø150-300 mm Tool holders: Various static and driven holders Setup mode: Electronic handwheel Additional features: Automatic door (pneumatic), transformer, oil skimmer Further accessories: Various jaws and EWS quick-change inserts

Stanje: dober (rabljeno), Roots blower Manufacturer: Leybold Model: RUVAC WSU 2001 Cat. No.: 11741 Pumping capacity: approx. 2000 m³/h Condition: Fully overhauled Warranty: 12 months Lhsdjdnv D Sopfx Afrsp (Image similar)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Turning-milling center Takisawa TMM 250 3, year of manufacture 2016, Fanuc control Turning length: 1300 mm Turning diameter: 350 mm Spindle speed (max.): 4000 rpm 9 axes 2 x spindles Lsdpert Ip Nefx Afrshp 2 x C-axis Swing diameter: 780 mm Max. turning diameter: 350 mm Max. turning length: 1,300 mm Chuck diameter left: 250 mm Chuck diameter right: 200 mm Upper tool carrier with Y-axis 260 mm and B-axis 230° / +/- 115° Complete with 30-position tool changer Lower tool turret: 15-station revolver – all positions driven Fully simultaneous 5-axis machining with turning/milling support. Tool changer with 30 stations Workpiece magazine, right side of the machine, with gantry handling Driven tools at the turret C-axis for left and right spindle Chip conveyor Internal coolant supply through milling spindle, 20 bar Due to excessive administrative expenses (customs regulations), we do not deliver to Turkey, Iran, Russia, or Belarus.

Stanje: novo, Leto izdelave: 2025, The EVP-RA 550 vibratory finishing machine from ERBA features an inclined process channel bottom with integrated separation. It is equipped with an easily exchangeable screening unit and delivers high operational efficiency thanks to its integrated drop step. Unloading and separation are performed via the built-in flap (manual/pneumatic). Upon request, a reinforced suspension and a high-powered motor can be installed for increased workloads. Motor speed can be continuously adjusted using a frequency inverter (optional). The EVP-RA 550 can be linked with other machines thanks to its lateral discharge system. The system can also be equipped with a fully automatic PLC control (optional). ERBA vibratory finishing systems are known for their reliability and longevity, which are based, among other things, on the hot-cast polyurethane lining of the process channel. Technical data: - Gross volume: 550 liters - Working channel width: 390 mm - Unbalance motor output: 4.0 kW - Speed: 1,400 rpm - Internal diameter of process channel: 1,400 mm All prices are net plus the currently applicable statutory VAT and freight costs. Please note: machines in pictures may include accessories that are optionally available and incur additional charges. If you are interested, we look forward to hearing from you. Our consultation is free of obligation and charge. Ledpfx Afen Ut Uvsrjhp The European Commission offers an online platform for out-of-court dispute resolution (OS platform). This listing serves solely for online presentation of our goods. Contract negotiations are conducted via telecommunication (e-mail, phone, message portal). In the first step, we provide you with a non-binding offer, which also contains our general terms and conditions with imprint as well as information on your right of withdrawal, before any purchase or contract is concluded.

Stanje: novo, Leto izdelave: 2025, The EVP-RA 350 vibratory finishing machine by ERBA features an inclined process channel bottom with integrated separation. The machine is equipped with an easily replaceable screening unit and is distinguished by high operational efficiency thanks to an integrated drop zone. Unloading and separation are carried out via the integrated discharge flap (manual/pneumatic). Upon request, the machine can be fitted with a reinforced spring assembly and a more powerful motor for higher loads. The motor speed can be infinitely adjusted with a frequency converter (optional). Thanks to its side discharge outlet, the EVP-RA 350 can be linked with other machines. The system can be optionally equipped with a fully automatic PLC control. ERBA vibratory finishing systems are renowned for their durability and longevity, owed in part to the hot-cast polyurethane lining of the process channel. Technical specifications: - Gross volume: 385 liters - Channel width: 340 mm - Imbalance motor output: 2.2 kW - Speed: 1,400 rpm - Internal diameter of process channel: 1,200 mm All prices are net, plus the applicable statutory VAT and shipping costs. The images may show the machine with accessories, which are optionally available at additional cost. If you are interested, we look forward to hearing from you. We will be happy to advise you without obligation. The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). Lhjdpfx Afen Ut Ursrjp The offer is intended solely as an online presentation of our goods. Contract negotiations take place via telecommunications (email, telephone, messaging portal). In the first instance, we will provide you with a non-binding offer, which includes our general terms and conditions with legal notice and information on the right of withdrawal before any purchase/contract conclusion.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, Splošni podatki Mere (širina): 6000 mm Mere (globina): 7000 mm Mere (višina): 3000 mm Teža stroja: 12200 kg Krmilna enota Lhedswygn Ijpfx Afrsp Znamka: HEIDENHAIN Model: TNC 426 Glavni pogon Območje vrtljajev glavnega vretena: 8000 min⁻¹ Moč motorja vretena: 15 / 10 kW Oznaka orodčnega stožca: SK 50 Število osi: 4+1 Pomiki Pomik osi X: 1250 mm Hitropomik osi X: 40 m/min Pomik osi Y: 880 mm Hitropomik osi Y: 40 m/min Pomik osi Z: 800 mm Hitropomik osi Z: 40 m/min Miza Število T-ut: 9 Nosilnost mize: 2000 kg Orodja Število postaj: 30 Maksimalna teža orodja: 20 kg Maksimalni premer orodja: 110 mm Maksimalna dolžina orodja: 420 mm Mediji Transporter odrezkov: Da Dodatna oprema Dokumentacija Sistem za hlajenje Visokotlačni hladilni sistem (40 bar) Hladilna tekočina skozi vreteno Elektronsko ročno kolo 90° vrtljiva rezkalna glava (H/V) 30-postajni revolver za orodja Merilna tipalka M&H RMP 2000 Hidravlični sistem Izvlečni filter oljne megle Opis stroja Ta 5-osni stroj DECKEL MAHO DMU 125 P hi-dyn je bil izdelan leta 2000. Opremljen je s krmiljem Heidenhain TNC 426, vrtljivo glavo in NC rotacijsko mizo z 360° vrtenjem osi B. Glavno vreteno omogoča do 8.000 vrt/min z močjo 15 kW. Stroj vključuje 30-postajni revolver za orodja in visokotlačni hladilni sistem. Če potrebujete visokokakovostne rezkalne zmogljivosti, razmislite o stroju DECKEL MAHO DMU 125 P hi-dyn, ki je na voljo za prodajo. Za več informacij nas kontaktirajte. Področja uporabe Rezkanje

Leto izdelave: 2012, Stanje: dober (rabljeno), številka stroja/vozila: ENOG, DEMAG KBK Crane Suspension System / Crane Runway Approx. 8x4 m Load Capacity / Lifting Capacity: 250 KG - 0.25 t Technical Data of the System: Crane runway made of Demag KBK1 + KBK2 rails System is delivered complete: KBK rails, rail connectors, trolleys, end plates, cable carrier, mounting brackets/hangers, etc. Lhsdpomqf Nfsfx Afrep Including Demag DC-COM 250 KG electric chain hoist Crane is dismantled and immediately available Used condition, see pictures Item location: 75053 Gondelsheim Shipping via freight forwarder or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are kept in stock! Other KBK systems also available. Load capacity ranges from 125 KG to 1600 KG. Please inquire with your required crane runway length, overhang, and dimensions.

Stanje: novo, Leto izdelave: 2025, The EVP-RA 550 vibratory finishing machine from ERBA features a flat-bottomed process chamber with integrated separation, designed for processing medium to large workpieces. It is equipped with an easily exchangeable screening unit. Unloading and separation take place via the integrated gate (manual/pneumatic operation). On request, reinforced springs and a more powerful motor can be installed for heavy-duty applications. The motor speed can be infinitely adjusted using a frequency inverter (optional). Thanks to its lateral discharge, the EVP-A 550 can be linked with other machines. The system can also be optionally equipped with a fully automatic PLC control. ERBA vibratory finishing systems are distinguished by their durability and resilience, which is largely due to the hot-cast polyurethane lining of the process chamber. Ledsn Ut Ugepfx Afrjhp Technical Data: - Gross volume: 550 L - Channel width: 390 mm - Unbalanced motor power: 4.0 kW - Speed: 1,400 rpm - Inner drum diameter: 1,400 mm Prices are net, plus the applicable statutory VAT and shipping costs. The images may show optional accessories, which are available at extra cost. If you are interested, we look forward to hearing from you. We will be happy to provide you with expert, no-obligation advice. The European Commission provides a platform for online dispute resolution (ODR platform). This offer serves solely as an online presentation of our products. Contract negotiation is conducted via telecommunications (e-mail, telephone, messaging portal). Initially, we will send you a non-binding offer, which also contains our general terms and conditions, legal notice, and right of withdrawal, prior to conclusion of sale/contract.

Stanje: rabljeno, Deburring and Fine Grinding Machine for Sheets / Flat Material, New The compact machining center for deburring, slag removal, descaling, oxide layer removal, edge rounding, fine grinding, and polishing of metal surfaces. This machine is suitable for heavy-duty applications. Thanks to its fixed working height, the machine can be seamlessly integrated into a production line and is suitable for processing large workpieces. Working width: 650 – 1650 mm Maximum workpiece weight: 2000 kg Wide belt with sanding belt length: 3250 mm Comes standard with a vacuum holding system; optionally available with a magnetic holding system. By using sanding belts with a length of 3250 mm, you achieve an even, smooth surface and reduce consumable costs, as these belts have a longer service life. The modular design of the system allows us to offer the optimal configuration for the customer’s machining requirements. The machine frame can accommodate up to 5 internal processing units and 2 additional external processing units. The high rigidity of the machine structure and feed table, combined with advanced mechanics and electronics, make this series a universal machining center for deburring and finishing. Please contact us for more information and images via email (at) or Ljdpfx Afsnah Taerehp