CNC stružnica z dvojnim vretenom

Takisawa TT-500 GD

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.500 mm, pomik osi Y: 700 mm, pomik po osi Z: 610 mm, nazivna (navidezna) moč: 37 kVA, vrtilni moment: 236 Nm, proizvajalec krmilnikov: Heidenhain iTNC530, model krmilnika: iTNC530, širina mize: 700 mm, dolžina mize: 1.700 mm, obremenitev mize: 700 kg, največja hitrost vrtenja: 12.000 obr/min, skupna masa: 9.000 kg, največja hitrost vretena: 12.000 obr/min, delovne ure vretena: 16.580 h, moč vretenovega motorja: 37 W, število vreten: 1, število mest v zalogovniku orodij: 48, Oprema: dokumentacija / priročnik, transportni trak za ostružke, 3-axis CNC machining center, Heidenhain iTNC530 X-axis travel: 1500 mm Y-axis travel: 700 mm Iaedpfx Afsvz Tyuj Tol Z-axis travel: 610 mm Table size: 1700 x 700 mm Tool holder: SK40 Tool magazine: 48 positions Rapid traverse: 36 m/min Table load capacity: 700 kg Through spindle coolant: 20 bar Chip conveyor Manual pulse generator (handwheel)

Stanje: rabljeno, Leto izdelave: 2012, Technical details: Swing diameter over bed: 20 mm Spindle bore: 3–20 mm Turning length: 250 mm Control: FANUC 31 i-A Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm Main spindle power: 3.7 kW Counter spindle power: 2.2 kW Number of tools: 35 Approx. machine weight: 3.3 t Space requirement approx.: 2.11 x 1.2 x 1.89 m Used CNC long/short turning and milling center with B axis, Control: Fanuc 31i-A Max. machining length: 250 mm Number of controlled axes: 7 axes, max. 5-axis simultaneous machining B axis: 0°–130°, freely programmable Bar capacity: Ø 3 mm to max. Ø 20 mm Main spindle drive power: 3.7 kW Counter spindle drive power: 2.2 kW Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm C axis: main and counter spindles Iedpfx Ajvivx Nsf Tjal Number of linear slides: 2 pieces Total number of tools: 35 Dimensions (LxWxH) in mm: 2,110 × 1,200 × 1,885 Weight: 3,300 kg Convertible between sliding-head and fixed-head turning Deep-hole drilling stations NAKANISHI high-speed spindle Rear slide with Y axis Cross drilling, rear side Chip conveyor Fire extinguishing system FMB bar feeder Minimag 20, year 2012 Approx. 7,200 operating hours

Leto izdelave: 1985, Stanje: dober (rabljeno), številka stroja/vozila: 04.2187, Hydraulic Internal Broaching Machine in Good Working Condition Manufacturer: Arthur Klink Iaodpjixntwofx Af Tel Year of Manufacture: 1985, refurbished Weight: 2 t Model: RIW 10 x 1200 x 400 Machine No.: 04.2187 Tensile Force: 10,000 kg at 3 m/min Broaching Speeds: hydraulically variable from 1 m/min to 7 m/min Return Speed: hydraulically variable from 7 m/min to 30 m/min Maximum Stroke: 1200 mm Broaching Tool Clamping: universal pull head for flat shanks up to 26 mm width Maximum Workpiece Diameter: Ø max. 480 mm (limited by oil and chip tray) Table Bore: Ø 70 mm Power Supply: 380 Volt / 50 Hz / 5 kW

Stanje: dober (rabljeno), Leto izdelave: 2019, Stroj ima 1500 ur vretena DMG Mori CLX 350 V 4, Leto izdelave 2019, Krmilje DMG Mori Slim Line / Siemens Shoptrun, Pomik X/Z 185/540 mm, Pomik Y osi 80 mm, Revolver z 12 orodji, Pogonska orodja, C-os, Merjenje orodij Tooleye, Trivpenjalna glava KNCS 225/66, Vpenjalni tulec, Držalo VDI 30, Visokotlačno hlajenje 12 bar, Kontra konica, Transporter ostružkov, Pripravljeno za podajalec palic. Iajdexy Hyzepfx Af Tel

Stanje: rabljeno, Leto izdelave: 1999, Technical Details: X-axis travel: 3,500 mm Y-axis travel: 2,200 mm Z-axis travel: 1,200 mm C-axis: +/- 200° Control: Heidenhain TNC 426 Spindle speed (left rotation): max. 10,000 rpm Spindle speed (right rotation): max. 10,000 rpm Distance between columns: 2,500 mm Distance spindle / table (vertical): 1,230 mm Clamping area (table): 3,000 x 2,000 mm Table load capacity: 10 t Tool holder: HSK A 63 Feed rate (X/Y/Z): max. 20 m/min Compressed air: 8 bar Total power requirement: approx. 100 kW Machine weight approx.: 40,000 kg Machine dimensions: 18.0 x 6.0 x 5.8 m 5-Axis Gantry Milling Machine Milling spindle: Manufacturer Hauser, type HS 256A-01 Uni, max. speed 10,000 rpm, direct drive Milling head: Manufacturer Hamül, fork-type design, A-axis integrated, rotation angle +/- 110° Tool changer: Manufacturer Hamül, rotary indexing table with turntable design, for 32 tool positions Chip conveyors: 2 piece(s) hinge-belt conveyor, manufacturer DGS with water tank, insert length 8,500 mm Combined oil-water chiller unit by BKW, type DL 55V-2KK, output 2.41 l/min, for hydraulic oil and spindle cooling Coolant system: Belt filter, manufacturer DGS, type SBF 150 Operation: via operator console type Heidenhain LE 426 X-, Y-, and Z-axis with Heidenhain linear encoders Handheld operating device HR 410 Hydraulic weight compensation (Z-axis) Equipment: Enclosure (protective walls with windows and safety doors) Hydraulic system Work area lighting Iasdpfx Afju Nc Emj Tsl

Leto izdelave: 2002, Stanje: zelo dobro (rabljeno),

Stanje: rabljeno, CNC lathe with Y axis and sub-spindle Graziano GT 300 Y Gital Gildemeister CNC Fanuc 16i-T ASA 5 Main spindle power: 15 kW Self-centering chuck diameter: 175 mm ASA 5 spindle mount Iaedpfx Afsqn E U To Tol Bar capacity: 52 mm Turning diameter: 230 mm Turning length: 500 mm Max spindle speed: 5000 rpm Number of tool turrets: 1 Number of tool stations in first turret: 12 Number of driven tools in first turret: 12 First turret tool mounting type: VDI 30 X axis travel: 160 mm Y axis travel: +/- 32 mm Z axis travel: 550 mm Rapid traverse (X/Y/Z): 30 m/min Sub-spindle: yes ASA 5 spindle nose Max sub-spindle speed: 5000 rpm Sub-spindle power: 9 kW Sub-spindle bar capacity: 30 mm Bar feeder make and model: LNS with single guide tube Chip conveyor: belted Presetting: yes Year: 2000 The machine is available under power in our warehouse in Gussago (BS), Italy. Mimu Machine Tools Italy

Stanje: dober (rabljeno), Leto izdelave: 2004, Clamping knife head type (max.) 460 mm Knife head weight (max.) 150 kg Mounting plate diameter for knife heads (Ø) 360 mm Mounting taper for knife heads nominal diameter Ø 58.227 mm Travel path - z axis 200 mm Chart recording magnification ±10 - ±500 µm Machine weight approx. 2.3 t Space requirement approx. 2 x 1.5 x 2.03 m In the manufacturing process for spiral bevel gears, the quality of the gear manufacturing tools used plays a decisive role. Especially in dry milling, high gear quality and long tool life can only be achieved through precisely adjusted knife heads. The Oerlikon Knife Head Setting and Testing Device CS 200 enables quick and easy adjustment of individual blades, checks their position, and documents the measurement results. The measurement process on the CNC-controlled testing device is semi-automated: all actions required to perform the process are shown on the display for operator guidance. The positioning of the individual knives in the knife head, as well as setting the height of the knife tips, is largely automatic thanks to a special procedure, and is simultaneously documented via a run-out diagram. A subsequent measuring process checks the radial position of both the internal and external cutting edges of all knives in the knife head. If individual inspection parameters on the knives do not meet the tolerance requirements, these can be adjusted individually. Thanks to the combination of Iedeul Efmepfx Af Tsal a semi-automated adjustment process, operator-guided setup actions, and automatic measuring processes, knife heads can be set quickly, conveniently, and with high precision. Operator-guided adjustment and inspection process: - Graphical display of the knife head design as well as measurement results with tolerance verification - Instructions for the operator in plain text (no coded information) - Simple allocation of measurement results to individual knives - Documentation of setup and measurement results via printer - Adjustment and inspection process suitable for stick blade heads of types ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® - Interface for neutral data

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 450 mm, pomik osi Y: 400 mm, pomik po osi Z: 240 mm, skupna masa: 6.000 kg, največja hitrost vretena: 42.000 obr/min, 5-Axis HSC Milling Machine Röders RXP500DSC with linear direct drives on all axes and torque drives on the rotary axes. The machine is being completely overhauled, tested, and calibrated in our facility. The machine will meet new machine tolerance standards! Travel distances: X 450 mm, Y 400 mm, Z 240 mm Spindle/Table distance: approx. 315 mm Iodstt Argopfx Af Teal - Linear direct drives on all axes – wear-free - 19-position tool changer - Cooling unit for drives, milling spindle, and control cabinet - Measuring laser for fully automatic measurement of milling tools (length/diameter/contour/taper angle) as well as wear monitoring, including tool cleaning before measurement - Hand control unit - Remote maintenance capability - Automatic 3D probe including calibration ball in the tool changer - Minimum quantity lubrication - Emulsion cooling - HSK40E spindle with max. 42,000 rpm - Spindle length compensation - EROWA zero-point clamping system integrated into the machine table - Manual chuck control - Automation package for retrofitting the machine with a pallet changer - Hand control unit Viewing the machine in ready-to-operate condition is possible at any time. For more information about the nature and scope of our overhauled machines, please visit our website or our Hüttmann YouTube channel.

Stanje: dober (rabljeno), Leto izdelave: 2000, Manufacturer: KUKA Iaodpfeh Dwr Ujx Af Tsl Model: KR 350/2 Year of manufacture: 2000 Net weight: 1,870 kg Without cables and control cabinet. Supplement to the measurement report!