Terminalski traktor

Terberg RT 223

Stanje: dober (rabljeno), številka stroja/vozila: 2929, Leto izdelave: 2011, nosilnost: 35.000 kg, skupna dolžina: 5.390 mm, skupna širina: 2.700 mm, dodatne značilnosti opreme: Front mud guards, Rear mud guards, Dual tread, Oprema: osvetlitev, Terberg RT223 od Uniktruck Gtjdpfx Adeyuhyms Asw

Stanje: zelo dobro (rabljeno), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.500 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 1.250 mm, obremenitev mize: 12.000 kg, premer vretena: 130 mm, največja hitrost vretena: 1.000 obr/min, dolžina mize: 1.800 mm, širina mize: 1.600 mm, Heidenheim TNC 355 Gedpfoyf Uc Aex Ad Ajtw

Stanje: rabljeno, prevoženi kilometri: 333.333 km, moč: 180 kW (244,73 KM), prva registracija: 11/2016, vrsta goriva: dizel, lastna masa: 11.720 kg, skupna masa: 18.000 kg, velikost pnevmatike: 315/60 R 22.5, konfiguracija osi: 4x4, barva: modra, vrsta prenosa: samodejen, vzmetenje: jeklo-zrak, skupna dolžina: 5.750 mm, obratovalne ure: 20.114 h, Oprema: ABS, drsna vrata, kabina, klimatska naprava, pogon na vsa štiri kolesa, Interior trim, street legal, drum brake, steering axle, sprung front axle, sprung cab, reverse warning system, seat heating, radio/MP3, radio/CD, heated exterior mirrors, speed limiter, Mercedes OM936LA engine (Euromot 4) incl. engine brake, ZF 6WG211 transmission incl. torque converter lock-up clutch (6 forward/3 reverse). Steering axle: Kessler type LT61PL 375 (ratio 9.76:1) with simplex wedge drum brakes and parabolic leaf suspension. Rear axle: Kessler type D81PL478 (ratio 9.76:1) with drum brake, air suspension. Steering: Fully hydrostatic Orbitrol system with priority valve, left-hand drive with rotating seat function. Roof window. Integrated ballast in vehicle front. Additional connection for 2-line brake system. 2x Duomatic connection. NATO external start socket (24 V). ABS cable and socket (ISO 7638/4091): 1x at rear cross member, 1x behind cab. 15-pin socket (DIN 12098): 1x at rear cross member, 1x behind cab. Gtjdpox U Ruhsfx Ad Aew Operating hours: 20,114 h Mileage estimated !!

Stanje: rabljeno, Leto izdelave: 2013, obratovalne ure: 22.407 h, moč: 175 kW (237,93 KM), proizvajalec motorjev: Mercedes, vrsta prenosa: samodejen, Machine type: RoRo terminal tractor Please contact Theo Lelie for further information. Gedpfx Aev D Ekked Ajtw

Stanje: rabljeno, Technical details: Gsdpfjvr S Ulsx Ad Astw Spindle diameter: 130 mm Drilling depth: 1380 mm X-travel: 2500 mm Y-travel: 1600 mm Z-travel: 380 mm W-axis: 900 mm quill stroke U-axis: 320 mm slide stroke Control system: on request Tool holder: ISO SK50 Feed rate: cross slide: 4.5–180 rpm Spindle speed: 4.5–900 rpm Feed rate (X/Y): 5–2000 Total power requirement: approx. 40 kW Approx. machine weight: approx. < 35 t plus additional equipment The machine can be offered in four different sales options. Please select: 1. The machine is in like-new mechanical condition, as is/where is. 2. The machine as is/where is, incl. plate table 4000x2000x300 mm = stock no. 1101081 3. The machine rewired, with new electrical cabinet, digital display, with 4 axes, Siemens AC drives, Siemens axis motors (50A/31Nm), with 12 months warranty on all new parts. 4. Optional additional equipment can also be offered, e.g. coolant system, chip conveyor, enclosure, etc. Let's discuss your specific needs. Best regards.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 3.000 mm, pomik po osi Z: 2.000 mm, obremenitev mize: 15.000 kg, premer vretena: 150 mm, hitrost vretena (min.): 4 obr/min, največja hitrost vretena: 3.000 obr/min, dolžina mize: 2.000 mm, širina mize: 1.800 mm, dolžina vrtalne vretena: 900 mm, HEIDENHAIN iTNC 530. ATC 60, Gedpfxjv U D Ntj Ad Aetw X = 4.000 mm. Y = 3.000 mm. W, Stolp = 2.000 mm. Z, Vreteno = 900 mm. Rotacijska miza 1.800 x 2.300 mm, 15 ton.

Stanje: novo, največja dovoljena obremenitev: 50.400 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment specification. Full specification available on request. GOOSENECK * Gooseneck in SNT design to optimize platform length, approx. length 3,700 mm, with rear bevel of approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Removable steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX at the front connection rail with sockets * 3 kW electro-hydraulic unit for controlling hydraulic operations, except for hydraulic winches * 1 pair of detachable ALU side walls, approx. 400 mm high, anodized finish * 1 detachable ALU rear wall, approx. 400 mm high, anodized finish * Over the gooseneck, approx. 40 mm thick hardwood flooring, over the king pin with checker plate covering * 2-inch king pin * Mount at the rear of the gooseneck for ALU drive-on ramps * Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917) LOAD PLATFORM * Extendable load platform, approx. length 8,800 mm, with rear bevel approx. 500 mm x 10° * Recess in platform and rear bevel for accommodating an excavator dipper stick, approx. 3,850 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, 1st axle self-steering, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reversing lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * Tires: 235/75 R 17.5 3PMSF twin tires * Mechanical landing legs with 2-speed gearbox and crank, JOST Modul B - static test load = approx. 50,000 kg * Platform with continuous and between-axles interrupted 50 mm thick hardwood flooring (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the extension tube with large cross-section * Extendable galvanized side extensions by approx. 230 mm each side (without wooden planks) * Wheel wells with square climbing strips, approx. 15 x 15 mm in front of the axles, continuous opening up to the cross member of the gooseneck, approx. 700 x 410 mm (W x D) * ALU covers for the wheel wells, usable as bridging elements for the extension OR as width extension planks Godpfstx Nwnex Ad Aetw * Lockable aluminium elements on the extension tubes of the side extensions * Widenable U-profiles for inserting ALU covers: - on the fixed section behind the gooseneck - on the intermediate table - on the extendable platform * Wheel wells with square climbing strips, approx. 15 x 15 mm between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D) * ALU covers for the wheel wells, usable as bridging elements for the extension OR as width extension planks * Lockable aluminium elements on the extension tubes of the side extensions * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with single-track monitoring of the axles, without installation in the tractor unit HYDRAULIC LOADING RAMPS * One pair of two-part steel ramps, type: DR-15/60-900-4350-KG-HV-M, approx. length 4,350 mm and width approx. 900 mm * Hydraulically folding ramp tips * Ramps hydraulically adjustable individually by approx. 235 mm outward and approx. 215 mm inward * Super Grip rubber surface approx. 25 mm and steel surface approx. 5 mm as additional

Stanje: rabljeno, Leto izdelave: 1973, Spindle diameter: 130 mm X travel: 3,000 mm Y travel: 2,000 mm Total power requirement: 4.5 kW Machine weight approx.: 30 t Boring spindle diameter: 130 mm Spindle taper: SK 50 Working area: X – Column longitudinal travel: 3,000 mm Y – Spindle housing vertical travel: 2,000 mm Z – Spindle stroke: 1,000 mm Gedot Hwt Sepfx Ad Ajtw Table size (lower): 3,300 x 2,400 mm Load capacity per m²: 10 t/m² Mounted table approx.: xx,000 mm Min./Max. position of working spindle above table: 770 / 2,770 mm Feed rate: 0.9 – 2,000 mm/min Rapid traverse for spindle headstock and column: 5,000 mm Quill feed: 0.5 – 1,200 mm/min Spindle speed range, partially infinitely variable: 4.5 – 1,250 rpm Machine weight: approx. 30,000 kg Accessories / Special equipment: • Heidenhain 3-axis digital readout, hardened guideways, ball screws • Infinitely variable spindle speeds and feeds, individually motorized feed drives • Operator’s traveling platform, pendulum panel control, manual hand panel, platform • Hydrostatic column displacement • Planed clamping plate 3,200 x 2,500 mm with T-slots, auxiliary table approx. 1,400 x 2,600 x 900 mm (H), one side face machined • Hydraulic clamping for column/carriage, motorized tool clamping • Extensive accessories including tool holders with and without tools • Separate chip extraction system, clamping aids, 1 clamping angle plate and plates, and much more

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, največja višina reza: 1.200 mm, največja širina rezanja: 1.100 mm, Danobat CP 1211T Visokozmogljiva tračna žaga Godpfxstv Nads Ad Aetw Kapaciteta rezanja, premer / kvadrat: 1100 mm Kapaciteta rezanja, pravokotnik: 1200 mm širina x 1100 mm višina Popolnoma avtomatska

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1982, Funkcionalnost: popolnoma funkcionalen, skupna masa: 17.500 kg, delovna širina: 1.300 mm, delovna višina: 1.300 mm, delovno območje: 1.300 mm, Amada H1300 Vodoravna tračna žaga (1982) Kapaciteta: 1300 x 1300 mm Napajanje: 230 V – 50/60 Hz / 400 V – 50 Hz / 460 V – 60 Hz Pogon rezila: 11 kW Hidravlični pogon: 3,7 kW Pogon hladilne črpalke: 0,4 kW Pogon žične krtače: 0,4 kW Dimenzije rezila: 11.380 mm x debelina 1,6 x širina 65 mm Gjdpfotv E Hcox Ad Aetw Lastna teža: 17.500 kg Skupna priključna moč: 16 kW Podatki o stroju: Model: H1300 Leto izdelave: 1982 Proizvajalec: Japonska