Center stružnica

TOS Trenčín SUI 80 Setzstock

Stanje: novo, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900x900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-tier sawing technology and maximum performance when cutting specialty steels. - The electro-welded machine frame and the steel saw frame meet all cutting requirements and eliminate vibrations and noise. - The chip conveyor is hydraulically driven and the speed is adjustable. - All machine motions (saw frame, vice, feed, saw band guides) are enabled by modern linear guides with high static and dynamic load capacity, guaranteeing very low sliding friction. - Another key feature is the material positioning rollers, which are powered by a hydraulic motor. These move at a right angle to the material, allowing for optimal clamping. - Thanks to the saw band position height control, the operator can position the band close to the material’s upper edge. After cutting, the band automatically returns to the previous position; alternatively, the 'remain' option in the lower position can be selected. During the cutting cycle, the software compares cutting force with preset values and can stop the sawing system in case of irregularities. - The saw band is cleaned by two adjustable steel brushes, which are hydraulically driven. - The hydraulic unit, including filter and manometer, ensures especially smooth operation at constant pressure. - Precision ground carbide inserts clamp the saw band, complete with lateral, hardened, and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. Tension is automatically released after a preset time when the machine is idle or after a cycle is completed. - Automatic version with CNC control available for the X-TECH 900 / 1200 models with a feed length of 500 mm for high production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, allowing precise material positioning even under maximum load. - All guided motions are facilitated by four ball circulation guides with high static and dynamic load capacities; significantly reduced feed friction. Hardened and ground prismatic guides. Kjdpfx Abofg E Hpebjwt Price on request.

Leto izdelave: 2001, Stanje: pripravljen za uporabo (rabljen), Working width: 2200 mm, number of sections: 6, equipped with Beta three-roll foulard, Mahlo straightening unit, Mahlo Movicat weft insertion device for punching basis weight samples, Brückner turner winder, heat recovery in exhaust air (1x air/air stage and 1x air/water stage), and electrostatic filter for exhaust air purification. Kwodpfxepy Eufs Abbjt

Leto izdelave: 1985, Stanje: rabljeno, Workpiece diameter: 25-90 mm Thread length: 3000 mm Thread pitch: 2-16 mm Total power requirement: 25 kW Machine weight: approx. 10.5 t Space requirement: approx. m O F F E R We are pleased to offer you, subject to prior sale and error, ex stock without obligation. Kwodpfxetzdyzs Abbst WALDRICH COBURG Whirling/peeling machine for the production of threads, worms, ball screws or similar workpieces Model: 16 GSL 25-90 / 3 m Year of manufacture: 1985 _____ Thread diameter: 25 - 90 mm Maximum thread length: 3,000 mm Thread depth: Pitch range: 2 – 16 mm Maximum pitch angle up to Ø 55 mm: 15 degrees Maximum pitch angle up to Ø 90 mm: 8 degrees Stepless whirling head speed: 285 – 1,700 rpm Workpiece speed: 0.5 – 68 rpm Bore of the clamping spindle and tailstock: 90 mm Whirling head drive: approx. 4 kW Total drive: approx. 25 kW - 380 V - 50 Hz Weight: approx. 10,500 kg Accessories / Special equipment: • Stable whirling/peeling unit with 2 leading and 2 trailing pneumatic steady rests with integrated prism guides. Manual adjustment of thread depth and optical pitch angle setting at the carriage. • Powered tool head, normally equipped with 4 tools: 2 base cutters, 1 flank cutter, and 1 deburring cutter. • Workpiece speeds and pitch feed are finely adjustable via change gears. Separate rapid traverse for the return of the whirling support. • Simple peripheral indexing device for whirling multi-start threads. • Retrofitting device for whirling threads longer than the center width using intermediate support. • For correcting pitch errors of the leadscrew, thermal expansion of the workpiece, or errors during retrofitting, the machine is equipped with a compensation system. This allows both electronically programmed compensation of the leadscrew and workpiece-specific linear compensation via a wedge system. • Motor-driven tailstock with automatic stop by contact pressure sensor • Extensive accessories, including cutting tools, tool holders, collets, accessory parts, setting devices, gauges, and service tools. • Central lubrication, coolant system, separate control cabinet, operating manuals The machine is suitable for pre- and finish whirling of single and multi-start right-hand and left-hand threads, worms, ball screws or similar workpieces!

Stanje: rabljeno, številka stroja/vozila: 13292, Rotor diameter: 368 mm Rotor width: 1500 mm Rotor knives: 82 Kwodpfowmg Sgex Abbet Stator knives: 1 row Drive motor: 90 kW

Stanje: dober (rabljeno), Leto izdelave: 2001, Manufacturer: BEHRINGER Kodsu U Narepfx Abbjwt Model: HBP 530 A Year of manufacture: 2001 Specifications Metric Capacity at 90°: 530 x 530 mm Min. cutting length: 40 mm Max. cutting length: 17 - 110 mm Power: 12 kW Chip conveyor: Yes Dimensions (approx.): Length: 4000 mm Width: 2250 mm Height: 3270 mm Weight: 4400 kg Please note: The information provided on this page has been compiled to the best of our knowledge and, where possible, sourced from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, no representation or contractual terms are to be inferred. We recommend verifying all key details.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Winch incl. Lifting capacity max. 2 t at 2.7 meters Lifting capacity max. 1 ton at 5.3 meters Operating hours: 270 h Electric: yes Kwedpfx Absq N E U Asbot

Stanje: zelo dobro (rabljeno), dolžina podajanja os X: 450 mm, dolžina pomika po osi Y: 300 mm, dolžina podajanja os Z: 300 mm,

Stanje: dober (rabljeno), Weiler E70 CNC Strug s prizmom vretena Kjdpswmqkyjfx Abbswt Godina: 2003 Rastojanje između centara: 2000 mm Provrt vretena: 8" (200 mm) Mašina opremljena sa: Prednji i zadnji stezna glava Konjić Fiksna luneta

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Sväng över bädd: 1290 mm Sväng över tvärslid: 910 mm Sväng i urtag (l:500 mm): 1580 mm Spetsavstånd: 6000 mm Spindelgenomgång: 155 mm Spindelvarvtal: 6–800 rpm Spindelnos: ASA A2 11" Arbetsstyckets vikt mellan spetsar: 20 ton Kon i bakdubb: MK6 Längdmatning: 0,045–5 mm/varv Tvärmatning: 0,022–1,5 mm/varv Metrisk gänga: 0,5–56 Modulgänga: 0,25–28 Whitworth-gänga: 1/2–84/" Spindelmotor: 30 hk Tillverkningsår: 1971 Längd: 9500 mm Bredd: 2000 mm Kwedpfxswc Nzpj Abbot Höjd: 1600 mm Vikt: 13 400 kg Sony DRO tvärslid 3 st stabilstöd Planskiva 4-backig planskruv Härdade gejdrar Elmatning på översta sliden

Stanje: rabljeno, Technical details: Spindle diameter: 130 mm Drilling depth: 1380 mm X-travel: 2500 mm Y-travel: 1600 mm Z-travel: 380 mm W-axis: 900 mm quill stroke U-axis: 320 mm slide stroke Kwjdpfx Abjvr S Ulobst Control system: on request Tool holder: ISO SK50 Feed rate: cross slide: 4.5–180 rpm Spindle speed: 4.5–900 rpm Feed rate (X/Y): 5–2000 Total power requirement: approx. 40 kW Approx. machine weight: approx. < 35 t plus additional equipment The machine can be offered in four different sales options. Please select: 1. The machine is in like-new mechanical condition, as is/where is. 2. The machine as is/where is, incl. plate table 4000x2000x300 mm = stock no. 1101081 3. The machine rewired, with new electrical cabinet, digital display, with 4 axes, Siemens AC drives, Siemens axis motors (50A/31Nm), with 12 months warranty on all new parts. 4. Optional additional equipment can also be offered, e.g. coolant system, chip conveyor, enclosure, etc. Let's discuss your specific needs. Best regards.