čelni viličar z dvižnimi vilicami 2022, 3,5 tone

TCM diesel FD35T3C

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, obratovalne ure: 22.605 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.600 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, teža bale: 1.400 kg, vhodni tok: 238 A, skupna masa: 36.000 kg, kapaciteta rezervoarja za olje: 1.300 l, For sale: Fully reconditioned baler with 100 t pressing force, large bale size 1100 x 1100 mm, 75 kW drive power, and 10-fold cross-tying. Technical data – Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main ram pressing force: 100 t Pre-pressing force: 50 t Operating hours: 22,605 hours Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Total connected load: 126 kW Total current draw: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates at a bulk density of 30 kg/m³: approx. 16 t/hour bulk density of 50 kg/m³: approx. 25 t/hour bulk density of 100 kg/m³: approx. 47 t/hour Bale weights up to 1,400 kg, depending on material and bale length Hydraulic tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operator panel: Schneider MAGELIS Touch Installed baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Machine weight baler: approx. 36 t Notes: The baler was partially reconditioned, serviced, tested after completion, and stored in our workshop. The machine is available at short notice and can be inspected at our warehouse by appointment. Ledpovf E Avofx Ab Tjri The following refurbishment work was performed: - Removal of rust and partial repainting of the press - Complete drainage of hydraulic oil tank, oil and air filters replaced - New hydraulic oil filled - All hydraulic hoses replaced - Main hydraulic cylinder, two pre-press flap cylinders, and compression channel cylinder removed, disassembled, inspected, cylinder tubes honed, all seal kits replaced, and final pressure test conducted - Pre-press flap disassembled with bearings and bearing blocks; first and third arc segments removed and rewelded - Both shaft bearings on the pre-press flap replaced - Upper material guide on pre-press flap frame replaced - Press ram dismantled, inspected, and both front guide rollers replaced - Material guides and wear plates on sides and base of press ram removed and rewelded - Horizontal and vertical needle and tying units dismantled, disassembled, inspected; plastic slide plates, twister shaft bearings, and wire deflector pulleys with bearings in the needle heads replaced - Both bronze slide rails left and right in the frame cover for the press ram replaced - Both wire deflection units left and right, with bale retention clamps completely replaced - Wire feed unit including hydraulic cylinder under needle passages completely renewed - Wire feed tracks in the floor and sidewalls of the press channel welded up and smoothed - General maintenance and servicing carried out according to manufacturer’s specifications - Baler tested in manual and automatic mode after refurbishment, accepted, and stored We accept no liability for the technical data or any potential errors.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Fully automatic flow wrapping machine for packaging products – regardless of their length – with complete wrapping and without film overlap. Product feeding is carried out via a conveyor belt while simultaneously enclosing the product in a center-folded film using a forming shoulder. Product indexing is achieved through a photoelectric sensor. The infeed conveyor can be easily adjusted for different product widths. Longitudinal sealing is carried out by a continuous side sealing unit. The height position of the forming shoulder and sealing units can be manually adjusted. Wearing parts and defective components have been replaced. The machine has been technically inspected by Kallfass and is in full working order. Ledpfxsw U A Eqo Ab Tsri Technical data: Cross sealing bar: 450 mm Film: center-folded film, approx. 12–80 µm Max. film roll outer diameter: 400 mm Max. film roll width: 600 mm Min. product length: 120 mm Min. product width: 80 mm Pass-through height: 200 mm Working height: 780–930 mm Power supply: 400 V three-phase, 50 Hz, with protective earth Rated power: 3.5 kVA Rated current: 5.1 A Tunnel pass-through width: 650 mm Tunnel pass-through height: 200 mm Inspection and demonstrations can be arranged by appointment at our premises. Functional guarantee, no warranty.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: FN 4529291, Leto izdelave: 2013, obratovalne ure: 4.034 h, nosilnost: 4.500 kg, dvižna višina: 5.270 mm, vrsta goriva: dizel, tip droga: triplex, dolžina vilic: 1.500 mm, vrsta pogona: Diesel, Diesel forklift Chassis number: FN 4529291 Load center: 500 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Hydrostatic Condition: Refurbished, without warranty Technical condition: Very good Lrodpfxowruqbs Ab Tji Front tires type: Superelastic Front tires size: 300-15 Front tires condition: New Rear tires type: Superelastic Rear tires size: 225-15 Rear tires condition: New Description: incl. new safety inspection according to accident prevention regulations (UVV) Sideshift, 3rd valve, Subject to prior sale

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2014, obratovalne ure: 24.967 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 004283-0030, stiskalna sila: 122 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.600 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, trajanje garancije: 24 meseci, leto zadnje generalne obnove: 2026, Oprema: dokumentacija / priročnik, This fully refurbished baler is offered for sale by Bollegraaf Recycling Solutions. The unit concerns a Bollegraaf HBC120s baler (90kW), equipped with cross tying (5 vertical and 5 horizontal wires). At the time of writing, this baler is undergoing a complete overhaul at our refurbishment workshop. This refurbishment is carried out in accordance with the strict Bollegraaf OEM Refurbishment Guidelines. After refurbishment, the baler is sold including a 2-year warranty. Technical specifications, type HBC120S: Volume capacity m³/h max. – 815 660 500 Bulk density kg/m³ max. – 20 50 100 Weight capacity t/h max. – 16.3 33 50 The aforementioned capacities apply only if the machine is used properly and is fed continuously with suitable material for at least one uninterrupted hour. Bale weight – approx. 1,470 kg, depending on material type and bale length Bale length – variable / adjustable Bale height – 1,100 mm Bale width – 1,100 mm Hopper dimensions – 1,100 mm x 1,600 mm – These dimensions also determine the maximum size of material that can be loaded into the machine. Press force – max. 119.7 tons Pre-press flap force – max. 65 tons Cycle time, excluding wire tying – 19 seconds Main motor output – 90 kW (120 HP) Twistomat (knotter) motor – 1.5 kW (SEW) Ledsxcir Eopfx Ab Teri Counter pressure pump motor – 1.1 kW (2 HP) Needle installation motor – 7.5 kW (SEW) Oil cooler fan – 3 kW (4 HP) Oil cooling pump – 4 kW (5.5 HP) Operating pressure – 315 bar Machine weight – approx. 40,040 kg Number of wires – 5 vertical; 5 horizontal Oil volume – 1,655 liters Oil type – BP-SHF-46 Colour – baler in RAL 6024 (green); safety doors in RAL 1021 (cadmium yellow) Baler dimensions – length 11,765 mm; width 2,500 mm; height 7,104 mm.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 170 t, širina odprtine za polnjenje: 1.020 mm, dolžina polnilne odprtine: 1.800 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, skupna masa: 40.000 kg, kapaciteta rezervoarja za olje: 3.000 l, leto zadnje generalne obnove: 2024, For sale is a used baling press system consisting of a chain belt conveyor for under-floor operation, complete with a feed hopper, a hydraulic pre-compactor with agitator, a MACPRESSE 111A baling press, two complete wire tying racks each with 5 wire spool holders (wire not included). Technical data - Press: Manufacturer: MACPRESSE EUROPA S.R.L. Model: 111A Year of manufacture: 1996, overhauled in 10/2024 Main press force: 170 t Specific press force: 14 kg/cm² Feed chute dimensions: 1,800 x 1,020 mm Filling volume: 2.5 m³ Theoretical throughput: 750 m³/hour Bale dimensions: 1,100 x 1,100 mm, length variable Drive power: 2 x 55 kW Tying: 5-fold horizontal, fully automatic Throughput rates: approx. 30 to 35 t/hour, depending on material Hydraulic tank volume: 3,000 l Transport dimensions (press with new machine feet): 11,700 x 2,300 x 2,900 mm (L x W x H) Machine weight (press): approx. 40 t Remarks: The baling press was partially overhauled in our workshop and fully tested after completion—see our function video for reference. Previously, paper and cardboard from municipal collection were pressed with the system. The operation was reassigned after the contract period ended, so the entire plant is for sale. Details of the overhaul and replaced spare parts can be found in the detailed photo documentation and our offer. The full documentation (manual, CE declaration, electrical/hydraulic diagrams) is available. Inspection by appointment. No liability assumed for technical data or possible errors. Technical data - Conveyor belt: Manufacturer: Wagensfeld B.V. Model: Chain belt conveyor 1700 mm Year of manufacture: 2017 Drive power: 7.5 kW Belt speed: 14 m/minute Feed belt length: 6,900 mm Inclined belt length: 12,885 mm Gooseneck length: 1,747 mm Total length: 21,271 mm Incline: 32° Usable width: 1,644 mm Drive axle height above ground: 5,777 mm Feed belt wall height: 500 mm Inclined belt wall height: 880 mm Steel cleat height: 40 mm Lrodpfxeu Th D Re Ab Tji Cleat spacing: 1,200 mm Transport dimensions (disassembled): 15,005 x 2,503 x 2,435 mm (L x W x H) Pit dimensions: 11,500 x 2,700 x 1,015 mm (L x W x D) Remarks: The chain belt conveyor, built in 2017, was custom-built and installed to fit the press at its last installation in the Netherlands. The conveyor is in good, ready-to-use condition and has therefore not been overhauled. A layout drawing with pit dimensions is available. Scope of delivery: 1 x Chain belt conveyor, Wagensveld B.V. 1 x Feed hopper with pre-compactor flaps 1 x Agitator 1 x MACPRESSE baling press, type 111A 2 x Wire tying racks with wire spool holders, without wire 1 x Operating manual with CE declaration, electrical and hydraulic wiring diagrams

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 5.500 mm, skupna višina: 2.000 mm, skupna širina: 1.400 mm, vrsta vhodnega toka: trifazni, višina izdelka (maks.): 400 mm, največja širina izdelka: 650 mm, priključek za stisnjen zrak: 6 letvica, širina folije: 650 mm, Manufacturer: Kallfass Verpackungsmaschinen GmbH Model: Super Wrap 650 De Luxe In-Line Bundling Machine Year of manufacture: 2009 Dimensions: approx. 3160 x 1340 x 2000 mm (LxWxH) Weight: approx. net 570 kg / gross 620 kg Technical data: Film: flat film, up to approx. 120 µm Film roll width: max. top 650 mm, bottom 620 mm Ledpfx Aoxxlhnjb Tjri Working height: 815 - 915 mm Passage width: 650 mm Passage height: 100 - 400 mm Power supply: 400 V three-phase Rated current: 7.2 A Compressed air connection: 6 bar Compressed air consumption: approx. 20 L/cycle This highly versatile banding machine operates with 2 flat film rolls. Product feed is fully automatic via an in-line conveyor belt. The sealing system is continuously heated, thermostat-controlled, and therefore maintenance-free. The film rolls are simply placed on, and the film is unwound by a motorized system. Manufacturer: Kallfass GmbH Model: Standard 650 NT Shrink Tunnel Year of manufacture: 2009 Dimensions: approx. 2400 x 1400 x 1550 mm (LxWxH) Weight: approx. net 750 kg / gross 820 kg Technical data: Tunnel passage width: 650 mm Tunnel passage height: 400 mm Tunnel outfeed, extended: approx. 500 mm Working height: 800 - 900 mm Power supply: 400 V three-phase Rated power: 26.5 KW Rated current at 400 V: 38.5 A in single operation Universally applicable, high-performance shrink tunnel with laterally adjustable air flaps and externally adjustable lower air outlets for precise control of hot air flow—achieving optimal shrink results even for difficult product contours. The recirculation system, tunnel cover with additional double chamber system, and significantly enhanced all-around insulation ensure energy-efficient operation. Equipped with infinitely adjustable rod chain conveyor. Inspection and demonstrations are possible on our premises by prior arrangement. Function guarantee, no warranty.

Stanje: rabljeno, Leto izdelave: 1985, Pressure: 100 t Column clearance: 1250 mm Stroke: 1035 mm Table surface: 890 x 1280 mm Distance table/ram, max. stroke up, adjustment up: 1035 mm Table height above floor: 630 mm Ram surface: 1000 x 1200 mm Lateral column passage: 700 mm Max. mould weight: 7 t Max. load capacity of swivel plate: 3.5 t Ledjvuumcspfx Ab Tsri Oil capacity: 180 l Drive power: 9.0 kW Weight: 11.0 t Space requirements (WxDxH): 2.1 x 3.8 x 3.9 m With pivoting ram, extendable table, tiltable table, ejector in table, hydraulic ram locking Press can be inspected in operation at our warehouse

Stanje: rabljeno, Leto izdelave: 2014, obratovalne ure: 13.993 h, Fuel type: Diesel Unladen weight: 4,400 kg Dimensions (L x W x H): 240 x 120 x 228 cm Lrodpfjxcaq Eex Ab Tei Lifting capacity: 2,500 kg Lift height: 332 cm Fork dimensions: 1,400 x 950 mm - Year of manufacture: 2014 - Documentation available: Yes - CE marking present: Yes - CE certificate available: No - Serial number: FN466939 - Operating hours: 13,993 - Lifting capacity: 2,500 kg - Lift height: 3,320 mm - Clearance height: 2,280 mm - Free lift: 0 mm - Fork length: 1,400 mm - Maximum fork width: 950 mm - Minimum fork width: 0 mm - Number of wheels: 4 wheels - Attachment: 4th valve to fork carriage, side shift - Options: Half cab, radio, work lights, heater - Mast: Duplex - Drive: Diesel - Engine brand: Mitsubishi - Transport dimensions: 2,400 mm x 1,200 mm x 2,280 mm (L x W x H) - Transport weight [kg]: 4,400 kg - Transport packages [pcs.]: 1 Financial Information VAT: The stated price is exclusive of VAT VAT/Margin scheme: VAT is deductible for businesses Delivery and trade-in available at any time for all items from the industrial sector Tess van den Boom

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2015, obratovalne ure: 25.504 h, nosilnost: 5.000 kg, tip droga: simpleks, Oprema: bočni pomik, rabljen viličar Jungheinrich DFG S50s. - Nazivna nosilnost: 5.000 kg - Letnik: 2015 - Delovne ure: 25.504 h - Polna kabina - Bočni pomik - Imobilizator s čipom Lredpfexupqxex Ab Tei

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2008, obratovalne ure: 5.154 h, nosilnost: 2.500 kg, dvižna višina: 4.700 mm, vrsta goriva: dizel, tip droga: triplex, gradbena višina: 2.100 mm, moč: 37 kW (50,31 KM), vrsta pogona: Diesel, Dizelski viličar Tip droga: Triplex Stanje: Pripravljen za uporabo in popolnoma delujoč Tehnično stanje: dobro Tip sprednjih pnevmatik: polna guma Lrjdpfx Asyrv A Rob Tsi Stanje sprednjih pnevmatik: 80 - 100% Tip zadnjih pnevmatik: polna guma Stanje zadnjih pnevmatik: 80 - 100% Opis: Dizelski viličar KOMATSU FD25T-16R - - 2,5 t nosilnosti - - bočni pomik - - triplex prost dvig droga - - konstrukcijska višina 2,10 m - - višina dviga 4,70 m - - leto izdelave 2008 - - 5154 delovnih ur po števcu - - 4-valjni Komatsu dizelski motor 50 KM - - polne gumijaste pnevmatike cca 90% - - delovna luč spredaj - - mehanske hidravlične ročice - - novo sedež še bo vgrajen Bočni pomik, 3. ventil, delovna luč zadaj, delovna luč spredaj,