CNC stružnica

TAKISAWA TT-2600CMG (10")

Stanje: rabljeno, Leto izdelave: 2017, Turning diameter: 290 mm Turning length: 204 mm Control unit: Fanuc 31i - Model B Operating hours: 4,185 + 9,159 h Number of spindles: 2 units Maximum spindle speeds: 3,200 rpm X-axis travel: 230 mm Z-axis travel: 250 mm Distance between spindle noses: 450 mm Spindle nose: A 2 - 6 Spindle bore: 73 mm Turret: 2 x 10 tool stations Isdpfxev Rrrhj Af Tsht Workpiece magazine: 14 positions Maximum workpiece diameter: 200 mm Maximum workpiece weight: 2 x 8 kg Maximum workpiece length: 120 mm Rapid traverse: 24 m/min Feed rates (longitudinal & cross): 0 - 1,260 mm/min Spindle drive: 11/15 kW Driven tools: 3.7/5.5 kW Speed range of driven tools: 4,000 rpm Total power requirement: 61 kVA Machine weight: approx. 6.3 t Space requirements: approx. 3.1 x 2.9 x 3.6 m Front turning machine – Horizontal twin-spindle lathe with Raku Raku gantry loader and workpiece magazine on both sides, C-axis, and 10-station turret for both sides. Driven tools only on the right side, 14-position workpiece pallet magazine. This is a used machine, therefore we sell under exclusion of any warranty. STOCK-HOLDING DEALER WITH 1,600 m² SHOWROOM.

Stanje: rabljeno, Leto izdelave: 2006, X-travel: 600 mm Y-travel: 400 mm Z-travel: 400 mm Control: MSX 501 Mori Seiki Table clamping surface: 700 x 450 mm Max. table load: 350 kg Number of T-slots: 4 Iedpfx Afov Az Ucs Teht T-slot width: 18 mm T-slot spacing: 100 mm Spindle speed: 12,000 rpm Main spindle drive power: 18.5 / 15 / 11 kW Tool holder: BT 40 Max. torque: 110.5 Nm Front milling spindle bearing diameter: 70 mm Rapid traverse (X/Y/Z): 20,000 mm/min Feed rate: 1 - 20,000 mm/min Fine feed rate: 15 steps / 0 - 1,260 mm/min Number of magazine positions: 40 Max. tool width: 80 mm Max. tool diameter with free adjacent box: 125 mm Max. tool length: 250 mm Max. tool weight: 8 kg Tool change time (chip-to-chip): 2.8 sec Tool change time (tool-to-tool): 1.0 sec Total power requirement: 34 kVA Machine weight approx.: 7.2 t Space requirements approx.: 2.8 x 3.0 x 2.9 m Vertical machining center MORI SEIKI - NV 4000 DCG - approx. 14,000 operating hours

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.500 mm, pomik osi Y: 700 mm, pomik po osi Z: 610 mm, nazivna (navidezna) moč: 37 kVA, vrtilni moment: 236 Nm, proizvajalec krmilnikov: Heidenhain iTNC530, model krmilnika: iTNC530, širina mize: 700 mm, dolžina mize: 1.700 mm, obremenitev mize: 700 kg, največja hitrost vrtenja: 12.000 obr/min, skupna masa: 9.000 kg, največja hitrost vretena: 12.000 obr/min, delovne ure vretena: 16.580 h, moč vretenovega motorja: 37 W, število vreten: 1, število mest v zalogovniku orodij: 48, Oprema: dokumentacija / priročnik, transportni trak za ostružke, 3-axis CNC machining center, Heidenhain iTNC530 X-axis travel: 1500 mm Y-axis travel: 700 mm Z-axis travel: 610 mm Ihjdpjvz Tyusfx Af Tot Table size: 1700 x 700 mm Tool holder: SK40 Tool magazine: 48 positions Rapid traverse: 36 m/min Table load capacity: 700 kg Through spindle coolant: 20 bar Chip conveyor Manual pulse generator (handwheel)

Stanje: rabljeno, Leto izdelave: 2012, Technical details: Swing diameter over bed: 20 mm Spindle bore: 3–20 mm Turning length: 250 mm Control: FANUC 31 i-A Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm Main spindle power: 3.7 kW Counter spindle power: 2.2 kW Number of tools: 35 Approx. machine weight: 3.3 t Iodpjvivx Nefx Af Tsht Space requirement approx.: 2.11 x 1.2 x 1.89 m Used CNC long/short turning and milling center with B axis, Control: Fanuc 31i-A Max. machining length: 250 mm Number of controlled axes: 7 axes, max. 5-axis simultaneous machining B axis: 0°–130°, freely programmable Bar capacity: Ø 3 mm to max. Ø 20 mm Main spindle drive power: 3.7 kW Counter spindle drive power: 2.2 kW Main spindle speed: 10,000 rpm Counter spindle speed: 10,000 rpm C axis: main and counter spindles Number of linear slides: 2 pieces Total number of tools: 35 Dimensions (LxWxH) in mm: 2,110 × 1,200 × 1,885 Weight: 3,300 kg Convertible between sliding-head and fixed-head turning Deep-hole drilling stations NAKANISHI high-speed spindle Rear slide with Y axis Cross drilling, rear side Chip conveyor Fire extinguishing system FMB bar feeder Minimag 20, year 2012 Approx. 7,200 operating hours

Stanje: dober (rabljeno), Leto izdelave: 2006, obratovalne ure: 119.571 h, potovalna razdalja osi X: 650 mm, pomik osi Y: 600 mm, pomik po osi Z: 500 mm, hitro pomikanje X-os: 45.000 m/min, hitri pomik os Y: 45.000 m/min, hitri pomik na osi Z: 45.000 m/min, model krmilnika: Siemens 840 D, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Hermle C30 U Siemens 840D Machine ON: 119 571 h, vreteno ON: 56 792 h - Vreteno HSK-A63 10.000 min⁻¹ - 32 orodnih mest - Rotacijska miza SRT 280 mm z integriranim vpenjalnim sistemom HSK100 (če ni potreben, ga je mogoče zapreti ali predelati v sistem za vpenjanje na ničelni točki) - Zunanja dovod hladilne tekočine - Notranja dovod hladilne tekočine s trakastim filtrom iz papirja, 80 bar - Pištola za splakovanje ostružkov - Transporter za ostružke - Ročni upravljalni modul - Samodejna kabinska vrata - 32 orodnih mest plus 87 dodatnih mest ZM87 - Toplotna kompenzacija - BLUM merilna sonda za orodja (bočna) Iodpfxjxcp Sre Af Tsht - Merilna sonda Renishaw - Zabojnik za ostružke - Signalna luč za status Stroj je bil popolnoma preverjen in ima geometrijski protokol ter meritve krožnosti. Stroj si je mogoče kadarkoli ogledati in preizkusiti pod napetostjo. Zelo dobro vzdrževano stanje.

Stanje: rabljeno, Leto izdelave: 1999, Technical Details: X-axis travel: 3,500 mm Y-axis travel: 2,200 mm Z-axis travel: 1,200 mm C-axis: +/- 200° Control: Heidenhain TNC 426 Spindle speed (left rotation): max. 10,000 rpm Spindle speed (right rotation): max. 10,000 rpm Distance between columns: 2,500 mm Distance spindle / table (vertical): 1,230 mm Ihedpfx Afju Nc Eme Tet Clamping area (table): 3,000 x 2,000 mm Table load capacity: 10 t Tool holder: HSK A 63 Feed rate (X/Y/Z): max. 20 m/min Compressed air: 8 bar Total power requirement: approx. 100 kW Machine weight approx.: 40,000 kg Machine dimensions: 18.0 x 6.0 x 5.8 m 5-Axis Gantry Milling Machine Milling spindle: Manufacturer Hauser, type HS 256A-01 Uni, max. speed 10,000 rpm, direct drive Milling head: Manufacturer Hamül, fork-type design, A-axis integrated, rotation angle +/- 110° Tool changer: Manufacturer Hamül, rotary indexing table with turntable design, for 32 tool positions Chip conveyors: 2 piece(s) hinge-belt conveyor, manufacturer DGS with water tank, insert length 8,500 mm Combined oil-water chiller unit by BKW, type DL 55V-2KK, output 2.41 l/min, for hydraulic oil and spindle cooling Coolant system: Belt filter, manufacturer DGS, type SBF 150 Operation: via operator console type Heidenhain LE 426 X-, Y-, and Z-axis with Heidenhain linear encoders Handheld operating device HR 410 Hydraulic weight compensation (Z-axis) Equipment: Enclosure (protective walls with windows and safety doors) Hydraulic system Work area lighting

Leto izdelave: 1990, Stanje: dober (rabljeno), CNC 4th Axis Make: NIKKEN Type: CNC-200 Year: 1990 Isdpegabu Uofx Af Teht with tailstock and base plate.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2013, obratovalne ure: 1.265 h, Funkcionalnost: popolnoma funkcionalen, največja hitrost vretena: 20.000 obr/min, premer struženja: 4 mm, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, Citizen R-serija avtomatskih stružnic, namenjenih obdelavi majhnih premerov. Stroj je bil zelo malo uporabljen (izdelanih samo 15.800 kosov). Letnik 2013. Opremljen z avtomatskim podajalnikom palic ASP-04. Ijdevtancepfx Af Tjht DDV ni obračunan, če je prodaja izven Turčije.

Stanje: dober (rabljeno), Leto izdelave: 2004, Clamping knife head type (max.) 460 mm Knife head weight (max.) 150 kg Mounting plate diameter for knife heads (Ø) 360 mm Mounting taper for knife heads nominal diameter Ø 58.227 mm Travel path - z axis 200 mm Chart recording magnification ±10 - ±500 µm Machine weight approx. 2.3 t Space requirement approx. 2 x 1.5 x 2.03 m In the manufacturing process for spiral bevel gears, the quality of the gear manufacturing tools used plays a decisive role. Especially in dry milling, high gear quality and long tool life can only be achieved through precisely adjusted knife heads. The Oerlikon Knife Head Setting and Testing Device CS 200 enables quick and easy adjustment of individual blades, checks their position, and documents the measurement results. The measurement process on the CNC-controlled testing device is semi-automated: all actions required to perform the process are shown on the display for operator guidance. The positioning of the individual knives in the knife head, as well as setting the height of the knife tips, is largely automatic thanks to a special procedure, and is simultaneously documented via a run-out diagram. A subsequent measuring process checks the radial position of both the internal and external cutting edges of all knives in the knife head. If individual inspection parameters on the knives do not meet the tolerance requirements, these can be adjusted individually. Thanks to the combination of a semi-automated adjustment process, operator-guided setup actions, and automatic measuring processes, knife heads can be set quickly, conveniently, and with high precision. Operator-guided adjustment and inspection process: - Graphical display of the knife head design as well as measurement results with tolerance verification - Instructions for the operator in plain text (no coded information) - Simple allocation of measurement results to individual knives - Documentation of setup and measurement results via printer - Adjustment and inspection process suitable for stick blade heads of types ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® Isdpoul Efmefx Af Toht - Interface for neutral data

Stanje: novo, Extraction capacity at nozzle* (Filter unit): 350 m³/h Total power consumption*: 0.09 kW Operating voltage: 230 V, 50/60 Hz, 1PH + N + PE Sound level*: 52 dB(A) Dimensions L/W/H in mm: L 329 / W 374 / H 510 Colour: RAL 7035 Weight: 25 kg Manufacturer: ISI Industrieprodukte Ihodpfx Afsh Rdwxs Tjt *Depending on filter configuration Special voltages or special colours available on request Application: Extraction of oil mist and fumes, suitable for small to very large machine workspaces | Oil mist separator Your advantages of the ELBARON series: - 18 device variants available - Directly from the manufacturer - ISI-TRONIC standard (digital filter control) - Electronically controlled EC-fan as standard - Adjustable speed and air output - Available in simplex (single-stage) or duplex (two-stage) versions - Wide range of air performance options - Adaptable to pollutant load and air performance requirements - Large range of installation and connection accessories - Quality made in Germany The ELBARON® filter series has been designed for use in metalworking operations with pure oil as well as for the separation of oil mist and fumes (oil mist separator). For many years now, the digital electrostatic air filters of the ELBARON® series have ranked among the most efficient filter units on the market and are in use worldwide. Our filter units are already supplied with digital control as standard and can, for example, be operated via laptop. The ELBARON® product series includes 18 device variants and can be optimally configured for your application in both size and capacity. ELBARON® units convince with long service life and absolute operational reliability. Our electrostatic filter cells are dimensioned to achieve the best possible filtration efficiency, long service intervals and trouble-free operation from an economic perspective.