3D UV sušilnik

Superfici Poliedra x 2 + TU 3500

Stanje: generalkompletno obnovljen (rabljeno), SCHLATTER MG24 Electro-Welded Mesh Production Line Completely refurbished WORKING RANGE Panel width: max. 2500 mm Cross wire length: min. 900 mm Cross wire length with QF5 distributor: min. 300 - 1600 mm Distance between extreme longitudinal wires: max. 2400 mm Mesh length (longitudinal wire length): max. 2500 - 6000 mm Longitudinal wire spacing: min. 100 mm Cross wire spacing: 25-250 mm Adjustable via cutting device (0-1) Longitudinal wire diameter: 4.0 - 12.0 mm Cross wire diameter: 4.0 - 12.0 mm Number of longitudinal wires: max. 24 MG 24.1/8C MESH WELDING MACHINE, Basic equipment includes: - 1 Machine frame - 1 Upper support for press reception, infinitely adjustable by handwheel - 1 Magnet supports with holding magnets and monitoring of cross wires - 1 Row of pneumatic solenoid valves for press operation - 1 Air and water supply installation - 2 Pneumatic rotary actuators with oil damping - Static torque at 5 bar compressed air: 480 Nm - Front section continuously adjustable from: 25 - 250 mm, adjustable via cutting device (0-1) - 1 Forward feed carriage with panel lifting device - 1 Tool set for machine adjustment WELDING SECTION includes: 8 Type C transformers Rated power per transformer: 100 kVA Secondary no-load voltage: 7.1 V Rated secondary current: 14 kA 8 ES 130 thyristor contactors 12 Welding presses: 5.0 kN 12 Longitudinal current bridges for wire spacing: 50-100 mm 12 Longitudinal current bridges for wire spacing (for staggered wires): 100 mm 10 Longitudinal current bridges for wire spacing: 100-150 mm 8 Longitudinal current bridges for wire spacing (for staggered wires): 150 mm 6 Longitudinal current bridges for wire spacing: 150 - 200 mm 6 Longitudinal current bridges for wire spacing (for staggered wires): 200 mm Rsdpfx Aowu Tu Djg Tsp 24 Lower Cu electrode holders with standard angle electrodes, each with a water-cooled current cable, width: 58 mm 24 Wire holding clamps Panel width: max. 2500 mm Cross wire length: min. 900 mm Cross wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme longitudinal wires: max. 2400 mm Mesh length (longitudinal wire length): max. 2500 - 6000 mm Spacing between longitudinal wires: min. 100 mm Spacing between cross wires: 25-250 mm Longitudinal wire diameter: 4.0 - 12.0 mm Cross wire diameter: 4.0 - 12.0 mm Number of longitudinal wires: max. 24

Stanje: dober (rabljeno), Leto izdelave: 2003, Manufacturer: KUKA Model: KR 210 L 180 Redpsh Dw Dqjfx Ag Tsp Year of manufacture: 2003 Maximum load capacity: 150 kg

Stanje: rabljeno, Leto izdelave: 2014, Drive power 3 kW Operating pressure 7 bar Flow rate / l Weight 286 kg Chicago Pneumatic CPVR15 CE Screw Compressor – Year of manufacture 2014 The CPVR15 CE impresses with its robust construction, long service life, and low operating costs. Whether in craft businesses, workshops, or industrial applications – this compressor reliably delivers the compressed air you need. Drive power: 3 kW Operating pressure: 7 bar Air delivery: up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Dimensions: approx. 965 mm (L) × 620 mm (W) × 1,040 mm (H) Operating noise: approx. 50–58 dB(A) Voltage/Frequency: 415 V / 50 Hz Applications: Workshops, craft businesses, industrial applications with medium compressed air requirements Scope of delivery: Rsdpfxeh A Sfdo Ag Tsp 1x Compressor - Chicago Pneumatic CPVR15 CE 1x Refrigeration dryer - OMI ESD 108 - 0.70 kW 1x Beko Öwamat 2 - Oil-water separator Technical data taken from publicly available sources.

Stanje: zelo dobro (rabljeno), Independent machine – Universal machine (first & second in a machine line) Electronic control system – EasyLing programmer Safety and soundproof enclosure No. 3+3 vertical columns, supporting working units Minimum usable working width (mm): 240 Maximum usable working width (mm): 3100 Minimum usable working thickness (mm): 3 Maximum usable working thickness (mm): 150 Rjdpfswhmdfex Ag Top Retractable stop cams, spacing (mm): 800 Feed speed (stepless, min/max) (m/min): 4 – 24 Total power output 4 working units (for each side of the machine): - Scoring unit - Automatic scoring unit 1 x 3 kW (RPM 6000) - Planing unit 1 x 6 kW (RPM 6000), 0–10° - Universal milling unit (electropneumatically controlled) 1 x 6 kW (RPM 6000), 0°–90° - Universal milling unit 1 x 6 kW (RPM 6000), 0°–90°

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, We offer for sale a complete SCHLATTER multi-point automatic steel wire welding line. We have three fully operational production lines available. Automatic machines for the production of cross wires (so-called straightening and cutting machines) are also available. Redpfxjtvpilj Ag Top Additionally, we have a wide selection of individual spot welders for steel wires.

Stanje: zelo dobro (rabljeno), Line for door frames (casings), for cutting, milling of strike plates and insertion of hinges (ANUBA) comprising: X10030A) Discharge conveyor X10030B) Transfer unit Rodpfxoqwycls Ag Tep X10030C) Double cutting and drilling machine "AMS"      - Left side cut 45° - Drilling - 90° cut - Right side cut 45° - Drilling X10030D) Angle conveyor (90°) X10030E) Anuba hinge insertion machine "MASTERWOOD" Mod. MULTITEC X10030F) Strike plate milling machine "MASTERWOOD" Mod. Teknomat 3000

Stanje: dober (rabljeno), Leto izdelave: 2007, številka stroja/vozila: 94323, potovalna razdalja osi X: 3.060 mm, pomik osi Y: 1.260 mm, pomik po osi Z: 150 mm, skupna višina: 2.400 mm, skupna dolžina: 4.400 mm, skupna širina: 2.800 mm, skupna masa: 3.130 kg, For sale: CNC MACHINING CENTER IN CONTINUOUS OPERATION Biesse ROVER 3.03 CNC machining center Rodpfxewpthts Ag Tjp Fully operational, available for inspection in Wadowice X-axis travel: 3060 mm Y-axis travel: 1260 mm Z-axis travel: 150 mm Control type: CNC XP 600

Stanje: novo, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, Neu Friulmac EQ 004 2.5 mit Zuführband und Aufgabetrichter Rsdpfx Agevupm De Tep Touchscreen-Bedienung und automatische Einstellung Arbeitslänge – min. 190 mm, max. 2500 mm Arbeitsbreite – min. 30 mm, max. 250 mm Arbeitshöhe/Dicke – min. 12 mm, max. 35 mm Vorschubgeschwindigkeit – 6–25 m/min 2 x 2 Vorschubaggregat – 3 kW – 720 U/min Hauptprofilkopf – 4 kW – 7200 U/min Für weitere Informationen kann ich Ihnen die Originaldokumentation zusenden.

Stanje: dober (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, Bobst SP 142 ER Year: 1987 Max. sheet size: 1020 x 1420 mm Min. sheet size: 700 x 520 mm Max. speed: 6,000 sheets/hour Redpjvhcgqsfx Ag Tjp Max. cutting force: 600 t Centerline system Micrometric adjustment Currently in production

Stanje: dober (rabljeno), Leto izdelave: 1989, številka stroja/vozila: AN-No.: 89.04.019 A, 5 units Jakob Müller Frick AG NF 42 in 5x 4/42mm configuration with Müdata and Mütrans, without creel, exceptionally clean, from Germany, 2nd hand NF42 in 4/42mm from 1988-1990 AN. No.: 88.04.017 H ex.Alge, Müdata, 16 frames, very clean – €7,000 AN. No.: 88.04.169 D ex.Alge, Müdata, 16 frames, very clean – €7,000 No. 213 Rodpfxer I Am Ho Ag Tep AN. No.: 89.04.019 B ex.Alge, Müdata, 16 frames, very clean – €7,000 No. 223 AN. No.: 89.04.046 B ex.Alge, Müdata, 16 frames, very clean – €7,000 AN. No.: 90.00.066 B ex.Alge, Müdata, 16 frames, very clean – €7,000