POŠEVNA ŽAGA Z ELEKTRONSKIM POTISKALNIKOM

Stromab TR 500 MATRIX

Stanje: novo, Leto izdelave: 2024, Mitre saw with electronic pusher and controlled axis. Cutting capacity: 55 x 360, 80 x 340, 95 x 325, 125 x 295, 135 x 280 mm Minimum workpiece thickness: 10 mm Work table inclined at 8° Technical Features of the Saw Unit: Pneumatic up-cut saw TR500 Motor power: 10 HP (7.5 kW), 400V/50 Hz TCT blade diameter: 500 mm, bore: 30 mm, teeth: 144, thickness: 4.6 mm Cutting cycle speed: 4 seconds Technical Features of the Feed System: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feed via rack and pinion system and brushless motor Positioning accuracy: +/- 0.4 mm Powerful infeed motor for package weight up to 80 kg Maximum speed of feed system: 90 m/min Pneumatic raising of the pusher at the end of the cutting cycle with overhead return Data Input Management: 12-inch TOUCH-SCREEN controller (800x600 pixels) USB port Ethernet port Ljdpfxjhw Ng Ij Aa Sjhp Linux operating system Load and save machine parameters via USB port Edit and enter cut cycles (patterns) directly on the controller Upload cut lists created on PC via USB or Ethernet port Operating Software: Manual input of stock length Partial optimization without length reading of the board Cutting cycle with 3 optimization options (maximum length, sequence, and board order) Up to 1000 cut lists with 11 sizes each or one list with 10,000 consecutive sizes "OPTI" package: automatic board length detection and full optimization Piece length measurement via photocell Cutting cycle with 6 optimization criteria: (longest length, sequence, board order, volume, minimum waste, and priority length) "OPTI PLUS" package: complete optimization with knot and defect elimination (OPTION NOT INSTALLED ON THE MACHINE) Technical Description: "OPTI PLUS" package: for removing knots and defects Photocell for reading knots and defects for timber mapping Marking with fluorescent chalks/crayons (Note – only orderable in combination with ZA250) Pneumatic side clamping unit

Stanje: novo, Leto izdelave: 2025, Working width: 600 mm Working height: 220 mm Minimum workpiece length: 250 mm Units: 4 1. Saw cut unit (Random System): Saw cut optic Lsdpfshwrp Rox Aa Sjhp 2. Brush: Metal, diameter 220 mm 3. Brush: Tynex grit 60, diameter 220 mm 4. Brush: Tynex grit 120, diameter 220 mm Height adjustment: Handwheel Height display: Mechanical counter Feed speed: 4 - 12 m/min Motor power, saw roughing unit: 1.1 kW Motor power, brushes: 4 kW Motor power, feed: 0.37 kW Machine length: 2,800 mm Machine width: 1,500 mm Machine height: 1,600 mm Weight: 1,500 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L/W/H): 0 x 0 x 0 mm Weight: 1000 kg Total power requirement: 8.5 kW Fully optimizing automatic cross-cut saw TR-500 MATRIX-6000 - Motor drive power: 7.5 kW - Saw blade diameter: 500 x 30 mm Z=144 - Cutting capacity according to cutting diagram - Cutting capacities: - 135 x 280 mm - 125 x 295 mm - 95 x 325 mm - 80 x 340 mm - 55 x 360 mm - Cutting cycle: 4 seconds - Pneumatic cross-cut unit - 8° inclined work table - Minimum workpiece thickness: 10 mm - Safety cover over cross-cut unit - CE standard - Weight: 1000 kg Connection data: Lhodpfxsv A Htdj Aa Ssp - Supply voltage: 400 V / 50 Hz - Control voltage: 24 V - Extraction ports: 4 x diameter 100 mm - Extraction performance: 2400 m³/h - Air consumption per cycle: 4 Nl - Extraction air speed at port center: approx. 25-35 m/s Electronically controlled pusher: - Feed length: 6000 mm - Pusher speed: 90 m/min - Driven by brushless servo motor - Feed system with precision rack and mass measurement via servo motor - Pneumatic pusher lift at end of cycle and overhead return - Photocell for workpiece length measurement - Photocell for defect reading – marking with fluorescent chalk - Working surface inclination: 8° - Positioning tolerance: +/- 0.4 mm Control system: - High-resolution 12" touchscreen monitor (800 x 600 pixels) - Creation of cutting lists directly on the machine control - Up to 1000 cutting lists with 10 dimensions each - Single list with up to 10,000 dimensions in sequence - 3 optimization options (maximum length, sequence, and workpiece sequence) - 3 optimization options (volume, minimal waste, and priority) - Standard USB and Ethernet ports - Includes "OPTI" Automatic measuring function for the workpiece to be cut. Optimal solution for processing material with variable lengths, with single or pack feeding - 6 optimization options (maximum length, sequence, workpiece sequence, volume, minimal waste, and priority) - Includes "OPTI PLUS" Function for reading markings to ensure full optimization and removal of knots and defects. - Markings with chalk Option: - Pneumatic side clamp €850.00 - Cutting list creation via PC €360.00 - Outfeed table €360.00/m

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Machine in very good condition, low hours – fully equipped. Additionally, 20 saw blades included in the package. SPECIFICATION: WRAVOR BAND SAWMILL Type 1225 AC (angled cutting) Maximum log width: 1250/1090 mm Maximum cutting length: 8 m Main motor: 45 kW Cast iron wheels Wheel width: 130 mm Wheel diameter: 1200 mm Vertical lifting (up/down): dual TR60x9 (18) screw system + 11 kW Danfoss frequency inverter + Siemens 3-phase motor with brake Electrical motor for head up/down: 11 kW PV 45 bandsaw blade, length: 8685 mm, thickness: 1.2 mm, width: 140 mm / 150 mm Powered feed with electronic forward and reverse control, SEW gearbox with flat asynchronous controller KA87 / GDRL100L 4BE5 / TF / ES7S / V Manual-sensor thickness adjustment with electrical deactivation Digital thickness setting with Wravor V280 program Hydraulic power unit 40 l, tank with two pumps 13+6 l + 3 kW motor Complete hydraulic system Hydraulic bandsaw blade guide left and right HIWIN linear guides Hydraulic debarker / bark cutter 1 Hydraulic board ejector arm 1 Additional hydraulic ejector arm & board alignment guide Side-mounted control panel Multifunction joystick with 2 positions: 1 Multifunction joystick with 4 positions: 1 Laser 15 mW: 1 Cameras: 3 Fan 2.2 kW + 15 m sawdust pipe + 4 pipe holders: 1 Water cooling – automatic booster pump cooling (Aki Tech high-pressure pump): 1 Preparation for ramp and automatic table + spreader: 1 Diesel lubrication: 1 TRACK: Welded structure, 14 m length Hydraulic clamp with two cylinders: 6 Hydraulic log turner: 6 Mechanical supports: 2 Hydraulic roller – forward: 6 Hydraulic log lifter on holders (mechanical roller): 4 Hydraulic log lifter on holders (hydraulic roller): 7 Lsdpfx Aaow E Ei Us Sehp Set of lifting rollers: 7 hydraulic + 4 m: 1 New type hydraulic log turner: 3 Log centering device – 1 set: 4 Hydraulic aggregate 120 l, tank with single 50 l pump, 15 kW motor + Danfoss frequency inverter: 1 Cable carrier with energy chain: 14.5 C-profile support for ventilation – 4 double trolleys Belt outfeed conveyor 4 m with 1 m feed section + 3 kW electromotor, front part with hydraulic lifting

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SK-K-24001, 1 Optimisation cross-cut line with scanner Make: Dimter Model: OptiCut 450 Year of manufacture: 2015 Lhodpfewya Syex Aa Sep Item No.: SK-K-24001 DIMTER cross-cut saw line comprising: - 1 x OptiCut 450 - Infeed system F 100 - LuxScan CombiScan+ C 200 with curvature measurement The machine was in operation until 2024, has been professionally dismantled, and can be inspected in this condition.

Stanje: dober (rabljeno), Leto izdelave: 1993, obratovalne ure: 3.467 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 165, skupna masa: 18.000 kg, skupna širina: 2.550 mm, skupna dolžina: 12.000 mm, skupna višina: 3.000 mm, transportna širina: 2.550 mm, transportna dolžina: 12.000 mm, transportna višina: 3.000 mm, moč: 243 kW (330,39 KM), secondary shredding basket, 150 mm diamond mesh Lhsdpfowh Tdxjx Aa Ssp

Stanje: rabljeno, Leto izdelave: 2006, Proizvajalec: Weinig Model: Unimat Super 4 Leto izdelave: 2006 Štiristranski skobeljni stroj Ledpfxsqprk To Aa Sshp Proizvajalec: WEINIG obnovljen Model: UNIMAT SUPER 4 z avtomatsko mehanizacijo kratkih obdelovancev EM15 - Leto izdelave: 2006 Tehnične specifikacije - Delovna širina: največ 150 mm - Delovna širina: najmanj 25 mm - Delovna višina: največ 50 mm - Delovna višina: najmanj 15 mm - Število vreten: 3 - Moč zgornjega vretena: 22 kW - Moč spodnjega vretena: 11 kW - Hitrost vrtenja vretena: največ 7.000 min⁻¹ - Premer vretena: 40 mm - Dolžina mize: 2.000 mm - Največja hitrost podajanja: 24 m/min - Neprestano nastavljivo podajanje - Poseben motor za vsako vreteno - Kardansko gnano podajanje valjev - Podajanje iz zalogovnika - Motorni pomik višine skobljanja - Avtomatska mazalna črpalka - WEINIG čelni rezkar - WEINIG EM 15 - Skupna priključna moč: 45 kW

Stanje: delavnici obnovljeno (rabljeno), Krimptunnel / foliewikkelaar Fabrikant: Kallfass Type: semi-/automatische krimptunnel Model: Combimatic 600 Frame: gelakt staal Bereik: max. pakket B x L x H = 600 x 380 x 400 mm Capaciteit: max. 600 verpakkingen/min Afmetingen: L x B x H = 4.200 x 1.550 x 2.000 mm Gewicht: 850 kg Stroomvoorziening: 380 Volt – 50Hz – 23,5 kW Uitvoering: Lsdpfx Ajg D Nyhoa Sohp - mobiel - watergekoelde lasbalk - automatisch / semi-automatisch - tweehandbediening Opmerking: in uitstekende staat

Leto izdelave: 2010, Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, The following machines, all in excellent condition, are available for sale – ideal for professional use in wood processing. Saw line consisting of: Lsdpew Stiuefx Aa Sshp • Infeed Device ZV21, Model EV 50 • Profiling Chipper ZD31, Model VM50 • Outfeed Device AV31, Model VZM • Centering Device VZ21, Model VZV • Log Rotator DV21, Model DV70-2 • Infeed and Centering Unit EVP • Profiling Chipper VM50 • Profiling Unit VMP450 F61 (4x110kW) • Microtec Measuring System Additionally Available Further used woodworking machinery ?️ Additionally available: Further used woodworking machinery Log Handling Springer  • 5-arm design  • Log Sorter (5-arm)  • Receiving Log Feeder (26 m) Log Rotator LINCK DV35/DV1 (new)  • Dimensions: 2.0 m (L) x 2.4 m (W) x 2.5 m (H)  • Weight: approx. 1.5 t  • State-of-the-art rotation technology for precise positioning 2 Units of Chipper Infeed – Infeed and Centering Unit EV30  • Dimensions: 5.5 m x 2.2 m x 2.1 m  • Weight: 8 t each Separating Conveyor  • Dimensions: 8.6 m x 2.0 m x 2.6 m  • Weight: 7 t 2 Units LINCK Chipper V30 (incl. spare chipper discs)  • Dimensions: 5.5 m x 2.3 m  • Weight: 11 t each Saw VS 66 – Left & Right Side  • Dimensions: 2.8 m x 2.1 m x 2.5 m each  • Weight: 3 t each LINCK Pre-centering Unit  • Dimensions: 3.0 m x 2.0 m x 1.1 m  • Weight: 0.8 t Log handling system with feeder and log conveyor Location & Availability All machines are located in our warehouse at A-3525 Lugendorf Nr. 38 and are available for immediate delivery. Price on request For further information or to arrange a viewing appointment, please feel free to contact me.

Stanje: rabljeno, Leto izdelave: 2007, No. 3177 Grecon Dimter OptiCut 200-1 Optimizing Crosscut Saw Used, year of manufacture: 2007 For cutting fixed lengths Wood dimensions to be processed: Infeed lengths min./max. 3,000 – 5,000 mm Infeed widths min./max. 80 – 200 mm Infeed thicknesses min./max. 38 – 80 mm Max. wood cross-section: 200 x 50 mm End product length min./max. 700 – 1000 mm Average number of cuts per board: 5 Wood types: softwood or hardwood Performance data: Feed speed max. 180 m/min, infinitely variable Time per crosscut incl. braking: 0.7 – 1.2 s Component overview: Pos. 1: Infeed conveyor belt in front of the saw Length 1.5 m, linked to the saw’s feed motor Pos. 2: Automatic crosscut saw OptiCut 200-1, left-hand version With integrated length measuring wheel and built-in waste extraction unit Graphical input terminal, 1/4 VGA display, with numeric keypad and function keys, including OptiCom software package for system control The machine is loaded from the left Pos. 3: Outfeed conveyor/sorting station with drive unit, without ejector Belt length approx. 1.5 m The machine is already dismantled and in storage. The infeed table was not used by the previous owner. Two feed rollers were installed for material feed. The conveyor table is included, only the rubber belt is missing. Sale on behalf of client, ex location Austria, without transport and assembly Subject to errors in description and price Optional transport and loading by us possible Lodpfxju Atmuo Aa Sehp To avoid misunderstandings, an on-site inspection by appointment is possible and recommended Sale in as-is condition Technical data, condition description, year of manufacture and scope of supply according to manufacturer’s brochure and/or previous owner, without guarantee Subject to prior sale No warranty given for used machines; the sale is governed by “purchased as seen” Pictures and videos are for reference only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment before collection or shipping Delivery terms: ex location