Kapovalna žaga

Stoll CrossCut 1000

Stanje: rabljeno, Leto izdelave: 2026, obratovalne ure: 15 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 204065, skupna širina: 2.900 mm, skupna višina: 3.300 mm, Rabljeni stroj CNC-rezalnik/plotter, rezalna površina v X in Y: 2.500 x 2.100 mm. Multifunkcijski CAM-rezalni sistem s CNC-rezilno tehnologijo za 2D rezanje usnja, tkanin, tehničnih tekstilij, pene in drugih ploščatih, polfleksibilnih ali togih, nemetalnih materialov. Oprema rabljenega stroja: • 1 rezalni most in 1 večnamenska nosilna glava za orodja Stroj se prodaja z motornim krožnim nožem, električnim oscilacijskim nožem in rezkalnikom (vključno z odsesovalno napravo). • Večnamenska glava omogoča uporabo do 3 zamenljivih orodij • Zmogljiv vakuumski ventilator za fiksiranje materiala • Standardno opremljen s sivo transportno mizo (trakasti transporter). Po želji možen zamenljiv zeleno-modri transporter (nudi visok kontrast za temnejše materiale). Možnost dodatne opreme (po povpraševanju): • EOT električni oscilacijski nož • POT pnevmatski oscilacijski nož • PRT motorni krožni nož • UCT univerzalni (vlečni) nož • KCT Kiss-Cut orodje • CTT utorni valj • V-Cut kotni rezalni nož • Prepoznavanje tiskarskih oznak • Kamera za registracijo • Prebijalno orodje za zareze ali luknje • Rezkalnik z odsesovalno napravo Enostavna uporaba • Enostavna menjava rezalnih orodij, "PLUG & CUT" • Intuitiven uporabniški vmesnik • Hitra menjava rezil Hfjdpsif Ek Rsfx Adksk • Vakuumske cone se aktivirajo s klikom Hitro povračilo investicije • Nizki stroški pri visoki dodani vrednosti • Optimalen izkoristek materiala s programsko opremo nest expert (ni vključena v obseg dobave) • Visoka hitrost • Konstantna natančnost Tehnični podatki: • Kratki časi rezanja zaradi visoke pozicijske hitrosti do 90 m/min • Ponavljiva natančnost +/- 0,25 mm • Reže enoslojno ali večslojno • Primeren za pločevino ali kolute (možna nadgradnja z ustreznim odvijalcem) • Hitra amortizacija (Slika izdelka je simbolična) Stroj je CE-certificiran.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, delovna širina: 3.000 mm, VROČA STISKALNICA MANNI - Dimenzije mize: 3000x1300 mm - Št. 6 cilindrov Hfjdpfsx Rqtiex Adkjk - Popolna z grelnikom za toplo vodo na lesne odpadke

Stanje: novo, Leto izdelave: 2023, New machine Year of manufacture: 2023 Partnership Edition Technical specifications: Cutting height: vertical: 0–2,150 mm, horizontal: 80–2,000 mm Cutting length: 5,300 mm Cutting depth: 80 mm (with clamps: 55 mm) Saw blade: diameter 303 mm, bore 30 mm, Z=60 hollow ground tooth Saw blade speed: 5,000 rpm Required air pressure: 6 bar Measurement readout for horizontal cuts: - via scale from 0–2,070 mm - via strip cutting stop from 75–500 mm Measurement readout for vertical cuts: - via scale from 0–1,300 mm Extraction ports: 1 x 100 mm, 1 x 120 mm Features: - ADVANCE clamping system consisting of: 2 pneumatic clamping tongs, motor-driven along vertical axes on a recirculating ball screw from top to bottom. The tongs handle panels up to a maximum weight of 150 kg. - Torsion-resistant, free-standing machine frame - Round bar guides, vertical and horizontal - Pneumatically retractable slatted frame - Fine-adjustable folding stop with stop extension - Fine adjustment for horizontal cuts via handwheel - Strip cutting stop - Manual programming rail with 5 T-slot stones - Pneumatic plunging of the saw unit Hfedpfxsw I U D Ee Adkok - 25 material support rollers - 1 infeed and 1 outfeed roller - Pneumatic workpiece clamping device between the support rollers - 3 central support elements, pneumatically folding out - Pneumatic saw head lock - Control panel with document holder - Switch unit on saw carriage: start button, stop button - Tool cabinet - Scale lighting for vertical cuts Partnership Edition features: - Digital display for the folding stop - Digital display for the saw unit, with incremental function - Pneumatically swiveling saw unit - Scoring system with controlled counter-air nozzle, numeric display for scoring or grooving depth setting, and activation indicator - 5.5 kW motor including star-delta starter - Cutting line laser Availability: short-term Location: Flörsheim

Stanje: novo, Leto izdelave: 2024, nosilnost na konzolno roko: 500 kg, višina police: 3.200 mm, skupna dolžina: 2.100 mm, skupna višina: 3.200 mm, razmak osovin: 1.000 mm, nosilnost na stojalo: 2.500 kg, Cantilever Rack in Hot-Dip Galvanized Design: Hfedpfx Adjqt Dmyjksk Scope of delivery: - 3 uprights, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) - 12 cantilever arms with 1.8 m usable depth (for chipboard panels approx. 2.1 m deep) - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Mounting material (bolts, nuts and washers) Net price: €2,490.00 plus VAT Detailed Description: - Robust steel construction made of IPE profiles (bolted system) - Rack height: 3,200 mm - Load capacity per upright: 2,500 kg - Base section and cantilever arms with 1,800 mm usable depth (for 2,100 mm chipboard depth) - Cantilever arms height adjustable in 100 mm increments - 4 bolted cantilever arms per upright as standard (= 5 storage levels) - Load capacity per cantilever arm: 500 kg - Including longitudinal and diagonal bracing for 1,000 mm upright spacing - Rack length = 2,100 mm - Includes mounting material (excluding floor anchors) - Supplied with assembly instructions and load signs C4 according to DIN standard - Made in Germany - Short delivery times Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. Material is sensibly packed for easy unloading. Delivery for stock items can be made approximately 1 week after receipt of order. When installed outdoors, the load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for dowelling, and capable of supporting the applied loads. The customer is responsible for checking and ensuring soil condition, bearing capacity, and any necessary official permits. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to occupational safety regulations, it is recommended that the uprights provide at least 500 mm projection above the top storage level.

Stanje: novo, VKM supplies spare parts for VKM and Oswald’s complete product range, as well as selected Bezner-Oswald and Wema Probst machines, BÖGLI band saws, and replacement knives manufactured according to drawing specifications for various woodworking machines. Some parts are available directly from stock. Below, you’ll find a selection of our most frequently requested parts: Centering roller, 40 mm bore €112.00/each Centering roller, 50 mm bore €156.00/each Feed roller, 40 mm bore €118.00/each Feed roller, 50 mm bore €138.00/each Outfeed roller, 40 mm bore €102.00/each Feed roller, 50 mm bore €126.00/each Bezner WP35 peeling disc €3,920.00/each Oswald RM162 slide carriage RM7072W €302.00/each Hfsdpfx Aog Rn Avedksk Oswald RM162 knife carrier RM7066W €215.00/each We are happy to provide a formal quotation including terms and conditions upon request. Additional spare parts available on inquiry.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, obratovalne ure: 2 h, Deutz TCD 4.1 L4 Deutz TCD 4.1 L4 EU Stage V / U.S. Tier 4 – EPA (115kW) Charge Air and Water Cooler Electronic Direct Injection / Common Rail Advanced Idle Automation with Engine Shutoff Function ECO and Power Mode Temperature-Controlled Fan Drive with Reversing Fan Spatially Separated High-Performance Cooling System Cooling System with Temperature-Controlled Fan Drive Reversing Fan for Hydraulic Oil Cooler External Jump-Start Terminals on Uppercarriage Maintenance Flaps, Gas Spring Supported with Soft-Close Assist Automatic Central Lubrication System, Grease Reservoir Fillable from Ground Level Rear View Camera Side Camera LED Lighting Package Equipment LED Lighting Package for Cab Support Blade on Oscillating Axle Side, 3m Width, with Integrated Cylinder Protection Travel Direction Detection and Steering Direction Reversal Electronic Steering Lock for Rigid Axle All-Wheel Drive and All-Wheel Steering Dual-Circuit Brake System Powershift Transmission Twin Pneumatic Tyres, without Intermediate Rings 10.00-20 16PR (Trelleborg T900) Wireless Tyre Pressure Monitoring Automatic Oscillating Axle Lock Front and Roof Protective Grille for Timber Loading Machines Rigid Cab System (Viewing Height 4.00 m) Cab Privacy Glazing (Side and Rear Windows) Single-Pane Safety Glass Sliding Window in Cab Door Clear Glass Roof Window Windscreen Washer System Low-Frequency Suspended Comfort Driver Seat incl. Seat Heating and Seat Ventilation with Synchronous Armrests / Joysticks Joystick Steering Automatic Climate Control Multifunction Display Document Clip Outreach at Stick Pin 13m at Grab Tip 10.7m Short-Range Extension for Loading Stick Level Monitoring for Coolant and Hydraulic Oil Attachment Tool Filter System Hfodpoyh A Iijfx Adksk Pipe Burst Valves for Hoist Cylinder Pipe Burst Valves for Stick Cylinder Basic Overload Warning Device Quick Coupler on Loading Stick Timber Grab on Request 1 or 1.25m³

Stanje: rabljeno, Leto izdelave: 2007, ENAOSNI DROBILEC WEIMA MODEL WLK15 GLAVNI MOTOR 90KW REZILA ROTORJA 50X50 (NOVA REZILA) DOLŽINA ROTORJA 1500MM Hfsdpfjtqdxfox Adkjk PREMER ROTORJA 370MM STROJ JE 100% FUNKCIONALEN PRIPRAVLJEN ZA DELO

Stanje: novo, Measuring lengths: up to 5700 mm Tube length: 6000 mm Number of supports: 7 Material: stainless steel tube Hedpfx Adefv Atlokefk Dimensions (L x W x H): 6.0 x 0.3 x 0.2 m The length measuring system is available as a retrofit for existing roller conveyors in lengths ranging from 2 to 6 meters. The guide rail is made from rectangular tube 60 x 30 x 3 mm. The steel measuring tape is self-adhesive. The magnifier with 6x magnification facilitates precise adjustment to the desired length. Note: This offer is for the stop system only, without roller conveyor!

Stanje: rabljeno, Adhesive application Glue application Adhesive application Hedpfx Adecht Nyeksfk - Glue application specified for package heights up to 300 mm via 1 application roller - Drive via 0.37 kW worm gear motor - 1 pc left - 1 pc right - suitable for DIMTER HK 200 and HK 400 Dimter spare parts Dimter accessories

Stanje: rabljeno, Leto izdelave: 1972, Premer vrtenja nad posteljo 1650 mm Premer vrtenja nad podporo 1350 mm Dolžina struženja 10000 mm Hitrost vrtenja 1,4 - 280 min⁻¹ Premer kroženja nad posteljo 1580 mm Višina konice nad ravno tirnico 825 mm Dolžina postelje 13.350 mm Širina postelje 1.120 mm Premer vretena v prednjem ležišču 260 mm Premer vretena 82 mm Pomik zgornje podpore 500 mm Premer konjičeve palice 200 mm Maks. teža obdelovanca med konicama 10.000 kg Teža stroja pribl. 25,5 t Moč 45 kW Stroj je iz prve roke, brez napak in v zelo dobrem stanju. Leta 2023 je bil menjalnik vretena obnovljen, zamenjana so bila tudi glavna vretena ležišča, kromiranje in obnovljena glavna vretena ter osnova (ležajno sedišče). Vodilne postelje so prav tako, glede na starost, v zelo dobrem stanju. Dodatna oprema - Zaščita za vpenjalo Oprema Hjdpfx Ajy S Duvedkofk - 3-osni digitalni prikazovalnik - 1 kos luneta - 1 kos podporni valjčni blok - Transporter za ostružke (energetska veriga 300/100)