Stroj za rezanje z vodnim curkom

STM 2030 PremiumCut 3D-68

Leto izdelave: 1988, Stanje: rabljeno, številka stroja/vozila: 103.071.3156.78192, Saw blade diameter: 400 and 425 mm Cutting capacity at 90° round: 130 mm Cutting capacity at 90° square: 120 x 120 mm Mitre cutting capacity at 45° round: 130 mm Mitre cutting capacity at 45° square: 110 x 110 mm Codpfx Aoz N Amofxepu Cutting speeds: 11 and 22 m/min Feed rates: 670 mm/min Cut-off length: with automatic feed up to 1200 mm Electrical connection: 380 V, approx. 4 kVA Saw drive: 1.6/2.5 kW Space requirement: 1800 x 3800 x 2000 mm Weight: approx. 1800 kg

Leto izdelave: 2002, Stanje: rabljeno, Diameter 180 mm Workpiece length 0 mm Workpiece width 1350 mm Total power requirement 65 kW Machine weight approx. 7,500 kg Required floor space approx. m T I M E S A V E R S (Netherlands) Wide Belt Deburring and Finishing Machine Model 41 Series 1350 WRDOW-N Year of manufacture 2002 Serial No. 2313-03 _____ Sanding width approx. 1,350 mm Max. workpiece height approx. 1 – 50 mm Feed speed variable approx. 1 – 10 m/min Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, 780 mm vacuum track in the center of the belt. Belt feed motor approx. 3 kW, frequency controlled for continuously variable feed rate 1 – 10 m/min. Selector switch for forward and reverse belt run, digital display for belt speed and continuous table height adjustment. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, belt speed approx. 11-22 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 3.) Vertical sanding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive nonwoven abrasive in various grades available, specially for deburring and cleaning surfaces as well as for radii rounding on workpieces. Also suitable for workpieces with varying heights. Drive approx. 7.5 kW, disc oscillates motor-driven (2.2 kW) across the entire belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, belt speed approx. 11 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 5.) Wet processing version = complete coolant system consisting of belt filter unit with pump installed in machine base, rotary union on top Cpodpfx Afjt Hw Shoxju of the deburring disc spindle, return of coolant via the vacuum table, and water mist separator above the machine, with blower approx. 5.3 kW. Side doors in V2A stainless steel sheet, oil skimmer, etc. 6.) Side-mounted control panel with clear controls and digital position and speed display. Joystick for feed belt and table adjustment, 3 x ammeters, etc. as well as front and rear workpiece pressure rollers, emergency stop Total drive power approx. 65 kW - 400 V – 50Hz Weight approx. 7,500 kg Required room height approx. 3.50 m Condition: good – available for demonstration under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Leto izdelave: 2024, Stanje: novo, This laser cutting machine is capable of processing sheet metal with a thickness of 3-4 mm. The Wattsan 1325 can cut stainless steel, carbon steel, galvanized steel, copper, aluminum, and titanium. It offers a working area of 1300 x 2500 mm. The precision infeed rollers of the Wattsan 1325 E facilitate material feeding. The E-series laser metal cutting machine achieves a maximum traverse speed of 80 meters per minute. Laser power can be up to 1.5 kW. The machine bed is made of steel. Cpedjiicw Eepfx Afxsu For further details, please contact our sales representatives! Wattsan 1325 E – Key Specifications: - Working area: 1300 x 2500 mm - Laser power: up to 1,500 W - Weight: 1,620 kg Virmer offers not only first-class machinery but also professional service and delivery. Our engineers and managers are ready to answer any questions you may have and can provide video support when necessary. Additionally, owners of Wattsan systems receive lifetime online support. Virmer is headquartered in the Netherlands and operates throughout Europe. Virmer is the official distributor for Wattsan. Besides laser engravers, we supply metal cutters, welding machines, marking systems, and cleaning equipment. Wattsan is a Chinese manufacturer with nearly 15 years of expertise in laser technology, continuing to develop based on customer feedback. Over 50 design upgrades have made Wattsan machines even more reliable, accurate, and efficient—enabling you to take your business to the next level. CONTACT US NOW! WE WILL SELECT THE RIGHT MACHINE FOR YOUR APPLICATION If you are seeking the right laser or CNC milling machine, we are happy to assist you. Discover our range of laser machines and accessories: - CO2 laser cutters - Metal laser cutting machines - Metal laser cutters - Fiber laser systems for metal - Fiber laser engraving machines for metal - CNC milling machines for metal - Wood milling machines - CNC router machines - Laser engravers - Laser cutting machines for plywood - Laser cutting machines for metal - CNC milling machines - Laser marking systems - Lenses - Chillers - Machine cooling systems - S&A chillers - IPG, MAX Photonics, Raycus laser sources - Compressors - Rotary devices - Laser mirrors

Stanje: rabljeno, • Load capacity: 350 kg • 6 suction pads, 250 mm diameter, adjustable • Vacuum lifter can rotate 90° and tilt 90° • Suction pads with guide tube and electric trolley • 4 units available, new and unused • Available immediately IV: + Design Standards 1. The construction of the system strictly complies with the European CE standard EN13155:2016, the American ASME (Mechanical Engineering Association) B30-20-2006 standard, and the German UVVI8 standard, with the key design parameters exceeding those required by the above standards. 2. Safety factor: The main structure features a safety factor of 4.0; the vacuum safety level is 65%, with the standard at 85%, which is 20% above the minimum safety standard. V+ Equipment Testing and Standards 1. General requirements Whether all materials are complete, whether the equipment’s exterior is painted or scratched, whether any suction pads or tubes are damaged. Cpjdpfxoxnvq Es Afxeu 2. Items tested before leaving the factory © Equipment suction test © Pressure retention test © Alarm function test © Various control components • Price on request

Stanje: novo, Leto izdelave: 2023, Beschreibung OREE S-1530: (3 kW) ab Lager Europa. Tischlänge: 3.060 mm Tischbreite: 1.530 mm Laser-Kopf: RayTools Autofocus Laserleistung: 3 kW Gesamtanschlusswert: 25–30 kW Lieferbar von 1 bis max. 6 kW Außenmaße: 4.950 x 2.280 x 2.130 mm Maschinengewicht: ca. 4.550 kg Ausstattung: - Maxphotonics 3 kW Laserquelle - CypCut-Steuerung (Vollausstattung) - Hochintegriert, einfache Bedienung, führende Technologie - RayTools Autofokus-Schneidkopf - Nesting-Funktion, Leapfrog, Kantenerkennung, Fly-Cutting - 27" Touchscreen, Tastatur, Bedienfeld - Zentrales Schmiersystem Schneidleistungen: - Baustahl: 18 mm - Edelstahl: 10 mm - Aluminium: 10 mm - Messing: 8 mm - Kupfer: 8 mm Achsen: - Maschinenachsen: 3 (X, Y, Z) - Verfahrweg X-Achse: 3.000 mm - Verfahrweg Y-Achse: 1.500 mm Cpodpfei Dbq Esx Afxeu - Verfahrweg Z-Achse: 100 mm - Achsgeschwindigkeit X/Y: 80 m/min - Positioniergenauigkeit: +/- 0,03 mm - Wiederholgenauigkeit: +/- 0,02 mm - Maximale Beschleunigung: 0,8 G Tischwechsel: manuell - Tischbelastung: 800 kg Schneidgase: - Baustahl: Sauerstoff (0,5–25 bar) - Edelstahl: Stickstoff (0,5–25 bar) - Aluminium: Druckluft oder Stickstoff (0,5–25 bar) Inklusive: - Kompatibles Absaugsystem - Grundausstattung Ersatzteilpaket - Schneiden von reflektierenden Blechmaterialien möglich Warum CNC Top Ten bv? - Über 50 Jahre Erfahrung mit CNC-Maschinen - Mehrere Service- und Vertriebsstandorte in West- und Osteuropa - Unser Service-Team kennt von Anfang an den Wert von Service, Installation & Schulung - Installation & Schulung für diese Maschine: 1 Woche (nicht im Maschinenpreis enthalten) - Preis richtet sich nach Einsatzort und Land des Endnutzers - Maschinen zum Blechschneiden - Achsen ausgestattet mit japanischen Servomotoren von YASKAWA - Servomotoren erreichen bis zu 100 m/min - Beschleunigungen bis 0,8 G - Faserlaser: Zukunftsweisende, energiesparende Lasertechnologie (mindestens 50% Energieeinsparung) - Komponenten sind extrem wartungsarm - Bis zu 50% Ersparnis je Bauteil durch effiziente Produktion - Zudem: präzise Schnitte und glatte Oberflächenqualität - Massiv gefertigtes Maschinenbett - Ausgerüstet mit hochwertigen, langlebigen Markenkomponenten: - Yaskawa Servoantriebe - Hiwin Linearführungen - Tongfei Doppelfunktions-Wasserkühler - Zwei CCTV-Kameras auf Monitor - Automatische zentrale Schmierung - Touchscreen - YYC/APEX Zahnstange & Ritzel - Standardmäßig mit Spannungsstabilisator - TBI Hochpräzisions-Kugelumlaufspindel für Z-Achse - Tisch mit Sägezahnbelag - Luft- & Gasdrucküberwachung in Echtzeit - CE-Konformitätserklärung Offizieller Händler: CNC Top Ten bv Denekamp, Niederlande

Leto izdelave: 1997, Stanje: dober (rabljeno), Material dimensions max. round: Ø 380 mm max. square: 380 x 380 mm Cutting lengths with single stroke: 10 - 510 mm with multiple stroke: max. 4590 mm Cjdpfxjha Hdhs Afxepu Dimensions (LxWxH): 3100 x 2200 x 1850 mm Weight: 3,100 kg

Stanje: generalkompletno obnovljen (rabljeno),

Stanje: novo, Leto izdelave: 2025, Obratovalno območje: 1000*1500 mm Skupne dimenzije stroja: 3630×2200×1940 mm Izhodna moč laserja: 3000 W / 2000 W / 1500 W Natančnost pozicioniranja osi X/Y: ±0,05 mm Natančnost ponovljivega pozicioniranja osi X/Y: ±0,03 mm Maks. hitrost povezave osi X/Y: 60 m/min 1. Kompaktna zasnova s popolno zaščito Majhna zasedenost prostora omogoča popolno zaščito in večjo varnost. Codog Db Uqepfx Afxjpu 2. Brez tresljajev pri rezanju tanke pločevine Serija i omogoča rezanje tankih pločevin brez sledov tresljajev.

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Several used high-pressure pumps available for sale individually or as a package Manufacturer Ingersoll/KMT – Type SL-IV50 / SLV50 / SLV50Plus Manufacturer UHDE – Type HP19/45S Manufacturer FLOW – Type 12X Due to legal reasons, these are offered strictly as parts donors Cpjdev I S Azspfx Afxju Inspection by appointment only Price on request

Stanje: rabljeno, Leto izdelave: 2020, x-travel, mm y-travel, mm z-travel, mm MASTERCUT Waterjet Cutting Systems The all-round system for demanding requirements ----- MASTERCUT waterjet cutting systems are the perfect all-rounders for advanced cutting tasks. MasterCut waterjet machines offer the ability to perform three-axis 3D cuts or complex 2D cuts. The machines are resource-efficient and are characterized by extremely low electricity, water, and air consumption. All structural components and screws are made of wear-resistant stainless steel or aluminum. Notable features include the flat underbody and smooth sidewalls with concealed linear guides without bellows, and a high-pressure tube routed within the axes. The fully digital drive consists of a brushless AC servo motor with multi-axis NUM or Eckelmann CNC control. The associated software runs on MS Windows and only requires a standard PC. ----- Advantages of MasterCut Waterjet Cutting Systems Maximum process reliability Automatic sensing of the workpiece as well as collision protection enable safe operation. STM waterjet cutting systems can mark as standard, and workpieces can be easily positioned using the positioning laser. Profitable and sustainable STM machines are distinguished by low operating costs. The waterjet cutting systems are designed to require as little compressed air, electricity, and water as possible. SmartCut cutting software The user-friendly SmartCut waterjet cutting software can be modularly extended to meet your requirements. All parameters can be intuitively set within the graphical user interface and dxf files imported directly. Superior user convenience STM waterjet cutting systems are accessible from three sides. Operation is performed via a classic Windows PC, and additional features such as manual control provide maximum ease of use. ----- Cpsdpfx Afjxtqxbsxou Technical Specifications: Travel speed: 15 m/min Positioning accuracy: ± 0.08 mm (per meter at 20°) Repeatability: ± 0.05 mm (per meter at 20°) Z-axis clearance: 180 / 240 mm ----- Price of the above-mentioned machine on request! ----- (Technical data according to manufacturer – no guarantee!)