Električni viličar

STILL R20-18I

Stanje: novo, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Temperature range: -45°C to +130°C Medium: Water/glycol mixture Dimensions LxWxH (without connections): 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Chjdpfxjg Ezarj Agtoa Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg *EQUIPMENT HIGHLIGHTS: - Control: temperature control (standard) - Controlled via PLC with touchscreen - Analog and digital interfaces - Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) - Heating control via solid-state relay (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: In case of incorrect water/glycol mixture, the system automatically issues a warning and then shuts down) - Pressure-controlled cooling water regulator (INFO: Significantly more accurate than temperature control) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metals) (optional: non-ferrous metal-free) - All medium-carrying components and pipelines insulated for low-temperature applications - Water-cooled condenser (air-cooled on request) *OPTIONS: - Volume flow control: up to 100 l/min, >4 l/min +/- 5% of reading - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring - Test piece draining via compressed air - Cooling water monitoring - Supply pressure limitation - Additional special options available upon request and subject to technical review Visit our website for more details or for other performance classes. *This device complies with European directives. Other directives and standards are only fulfilled if stated in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from the standard are specified in offers or order confirmations.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, obratovalne ure: 2.963 h, Funkcionalnost: popolnoma funkcionalen, največja hitrost vretena: 6.000 obr/min, potovalna razdalja osi X: 140 mm, pomik osi Y: 70 mm, pomik po osi Z: 235 mm, prehod palice: 42 mm, skupna višina: 1.700 mm, skupna dolžina: 2.220 mm, skupna širina: 1.460 mm, skupna masa: 3.100 kg, Miyano BNA-42 DHY3 CNC stružni center, letnik izdelave 2022, v odličnem in popolnoma delujočem stanju. Stroj je takoj pripravljen za uporabo in ima le 2.963 obratovalnih ur. Cjdsw Igyrspfx Agtjha POMEMBNE LASTNOSTI - 2 vretena: glavno vreteno in pomožno vreteno - 2 revolverja - Os Y na zgornjem revolverju - Pogonske orodja - Največji premer obdelovanca, glavno vreteno: 42 mm - Največji premer obdelovanca, pomožno vreteno: 34 mm - Požarni sistem Kraft & Bauer - Sistem za odsesavanje - Transportni sistem za струžine Knoll TEHNIČNI PODATKI Glavno vreteno - Največji premer obdelovanca: 42 mm - Gib osi: 100 mm - Hitrost vretena: 6.000 vrt/min - Moč pogona vretena: 7,5 / 5,5 kW - Ločljivost osi C: 0,001° Pomožno vreteno - Največji premer obdelovanca: 34 mm - Hitrost vretena: 5.000 vrt/min - Moč pogona vretena: 5,5 / 3,7 kW - Ločljivost osi C: 0,001° Zgornji revolver - 8 postaj - Gib osi X: 140 mm - Gib osi Z: 235 mm - Gib osi Y: 70 mm (+/- 35 mm) - Hitrost pogonskih orodij: 5.000 vrt/min - Moč pogonskih orodij: 1,0 kW Spodnji revolver - 6 postaj - Gib osi X / Z: 140 / 310 mm Električno napajanje - Skupna priključna moč: 30 kVA Dimenzije in teža - Površina, ki jo zaseda stroj: 2.220 x 1.460 mm - Višina stroja: 1.700 mm - Teža stroja: približno 3.100 kg Stroj se nahaja v naših prostorih v Hornbergu. Za dodatne informacije in dodatne slike nas kontaktirajte.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, največja dovoljena obremenitev: 2.500 kg, dvižna višina: 17.000 mm, Leto izdelave: 2022, obratovalne ure: 1.522 h, This is a unit in very good condition – operated by our own operators. When purchasing from the exclusive distributor, you are assured of the quality of the machine, spare parts availability, and after-sales service. A presentation or rental can be arranged. Key equipment information: Chjdpfxjwnd Nls Agtoa The M250 model is currently the most popular crane in Poland for installing aluminum joinery above 10 meters. Compared to competitors, it stands out primarily for: - YAN-MAR diesel engine, more powerful than the popular Maeda mini crane - Fully hydraulically extendable jib, ready for immediate operation - Remote control included as standard (brand: Scanreco, used in the world’s best machines) - Horizontally extendable tracks (in competing models, the tracks extend at a 45-degree angle, which increases the crane’s height when fully extended) - The most powerful searcher hook for the main boom available on the market (2000 kg) - Winch rope assembly mounted to the mast as needed. If the rope block is not required (working with a searcher hook), the end of the rope is secured to the side of the main boom - Very compact design (all ropes and sensors routed inside the mast) The offer concerns the mini crane BG Lift M250 with the following equipment: • 900 kg winch (65m) • Electric motor (single-phase – 220V) • Hydraulic jib • Searcher hook (for the jib) • Pulley set (single rope reeving) • Pulley set (triple rope reeving) • White tracks Operating hours on diesel engine: 11,522 Operating hours on electric motor: 321 M250/2

Leto izdelave: 2022, stanje: kot nova (razstavni stroj), Aluminium angle conveyor belt including mobile undercarriage Horizontal section: 1,100 mm Inclined section: 1,500 mm Angle of incline at bend: 60° Total belt length: 1,750 mm Discharge height: approx. 1,600 mm Chodpsi Igikefx Agtsa Height of horizontal section: 300 mm (infeed height) Conveyor belt width: 500 mm PU conveyor belt incl. carriers and wave edge, petrol matt finish Drive: Motor 0.25 kW, speed 0.2 m/sec Connection: 220/240V, 50Hz, protection class IP54 Drive and components ready to connect, motor control optional 4x fully swivelling transport castors with parking brake 2 pcs. wave edge 50x35 mm 11 pcs. T-50 cleats centrally welded – 481 mm pitch 2-ply, especially cross-stable Usable width 290 mm, calculated as follows: Crosswise arrangement -70+30-5+290-5+30-70 mm

Stanje: skoraj kot novo (rabljeno), Manufacturer: Flender Model: K2S-2,5 Backstop: Yes Power: 78 kW Chodog Stz Aepfx Agtsa Gear Ratio: 44.16:1 Input/Output Speed: 1,400 / 31.7 rpm Input Shaft Diameter: 65 mm Output Shaft Diameter: 140 mm

Leto izdelave: 1980, stanje: dober (rabljeno), A very well-preserved, cycle-controlled lathe from Weisser Heilbronn equipped with SIEMENS control system. Centre distance: 2000 mm Centre height: 295 mm Swing diameter over bed: 600 mm Swing diameter over cross slide: 260 mm Swing diameter in the gap: 800 mm Total length of gap: 375 mm Bed width: 450 mm Travel X-axis: 350 mm Travel Z-axis: 1850 mm Spindle nose according to DIN 55022: Size 8 Number of spindle speeds: 18, range 14 – 1400 rpm Spindle bore: 71.5 mm Front bearing diameter: 110 mm Feed range: 0.01 – 40.95 mm/rev Chjdpjgyy I Asfx Agtsa Rapid traverse: 8 m/min DC drive: 15 kW, 400V, 50Hz Max. allowable torque at the spindle: 2500 Nm Tailstock quill diameter: 80 mm Quill stroke: 250 mm Quill taper: MK 5 Length x width x height Machine weight: 5500 kg Accessories: — Tailstock — Pneumatic 3-jaw chuck with exchangeable jaws, 315 mm — "MULTIFIX" quick-change tool post in front of the centre, size "C" — 4-position turret behind the centre — Tool holder — Coolant system — Follow rest, pneumatically operated Technical data and dimensions subject to change and errors. Video conference via WhatsApp possible by appointment.

Leto izdelave: 2007, obratovalne ure: 4.100 h, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stroj ni več potreben za našo proizvodnjo, zato je naprodaj. Stroj je v naši lasti od leta 2007 in je redno vzdrževan. Vse deluje normalno. Razstavljanje in nakladanje na tovornjak sta vključena v ceno. Dodatne informacije: Chedpfxjwwtw De Agtoa 5-osni stroj za obdelavo profilov Namenjen za fleksibilno in učinkovito obdelavo aluminija Avtonomno pozicioniranje sponk Maksimalna delovna dolžina: 9.300 mm 12 pnevmatskih sponk Magazin za orodje s kapaciteto 20 orodij in žagin list 500 mm Delovne ure vretena: 4100 h Dodatne tehnične specifikacije na zahtevo

Leto izdelave: 2002, stanje: dober (rabljeno), Manufacturer: Matsuura Model: LX-O Control: YASNAC Year of manufacture: 2002 Specifications Csdpfx Agjlz Rvletoha Metric US Standard X-axis travel: 330 mm Y-axis travel: 300 mm Z-axis travel: 250 mm Table length: 540 mm Table width: 320 mm Table load capacity: 100 kg Feed rate X-axis: 90,000 mm/min Feed rate Y-axis: 90,000 mm/min Feed rate Z-axis: 90,000 mm/min Tool holder: 30 ISO/BT/MK Spindle power: 7.5 kW Spindle speed: 40,000 rpm Tool changer: 30 positions Chip conveyor: Yes Dimensions (approximate): Length: 2,800 mm Width: 2,600 mm Height: 2,800 mm Please note: The information on this page has been provided to the best of our knowledge and, where possible, sourced from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contractual terms. We recommend verifying all important details.

Leto izdelave: 1981, stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Previous application: Production of TPE films up to 6 mm thick. Many other polymers can be processed. The line has been in operation until now and is available for inspection at any time in Nuremberg. The line consists of: Single-screw extruder Kuhne K45-24D Cjdju Ttf Nopfx Agtjha Screw diameter: 48 mm Process length: 24D Drive power: Heating power: 6.0 kW Net weight: 1,150 kg Flat die: Films up to max. 330 mm width Calender Gross roller width: 1,200 mm Net roller width: 1,100 mm (max. film width) Take-off unit and flying shears

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, potovalna razdalja osi X: 495 mm, pomik po osi Z: 780 mm, moč vretenovega motorja: 37.000 W, največja hitrost vretena: 2.000 obr/min, skupna višina: 3.636 mm, skupna širina: 2.860 mm, proizvajalec krmilnikov: FANUC, model krmilnika: 0i-F Plus iHMI-Touch, največja dolžina izdelka: 2.005 mm, število osi: 3, Ta 3-osna vertikalna stružnica tipa DN SOLUTIONS PUMA V8300MR je bila izdelana leta 2023. Stanje je kot novo, primerna za razstavni prostor. Ima maksimalni premer obdelovanca 830 mm in dolžino obdelovanca 690 mm. Stroj je opremljen z zmogljivo vreteno, ki zagotavlja navor 2.592 Nm in hitro premikanje 20 m/min. Če iščete visokokakovostno stružnico, razmislite o modelu DN SOLUTIONS PUMA V8300MR, ki ga ponujamo v prodajo. Za več informacij nas kontaktirajte. • Stanje: Razstavni eksponat, kot novo • Velikost vpenjalne glave (glavno vreteno): do 15" (380 mm) (ni vključeno v dobavo) • Premer obdelovanca (palica): 60 mm • Hitro premikanje (X/Z): 20 / 20 m/min • Navor vretena: 2.592 Nm • Maks. premer obdelovanca: 830 mm • Maks. dolžina obdelovanca: 690 mm • Število orodij: 12 • Nosilec orodja: BMT 75P • Tip vodil: pravokotno vodilo • Velikost monitorja: 19" • Glavne značilnosti: • Zmogljivo, zelo kompaktno vertikalno stružnico • Statično vreteno; optimalno obremenitev z žerjavom in dobra dostopnost za operaterja • Izjemno trden liti postel • Glavno vreteno z visokim navorom • Kompaktna konstrukcija stroja • Po želji pogonjena orodja z visokim navorom (možnost) • Kakovostna, robustna pravokotna vodila • Hitro premikanje do 20 m/min Dodatna oprema • Črpalka za hladilno tekočino, 10 barov • Ločevalnik olja • 3-barvna opozorilna luč Chodpfx Agsyrr Rwstja • Po želji: odvajalec sekancev (tekoči trak). Cena na zahtevo • Stroj je dobavljen z standardnim osnovnim paketom: vrtljak je popolnoma opremljen, vključno z osnovno montažo. Tehnične specifikacije Pogonska orodja: Ne