Obdelovalni center

Starrag-Heckert HEC400D

Stanje: dober (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 650 mm, pomik osi Y: 650 mm, pomik po osi Z: 650 mm, Make: STARRAG HECKERT, Model: HEC 400D, Year: 2014, Ijdpfx Aouav Hpjf Tsht Control system: Siemens, Model: Sinumerik 840D, Travels X/Y/Z = 650 x 650 x 650 mm, 2-station pallet changer, pallet size 400 x 400 mm, NC rotary table 360° x 0.001°, 60-position tool changer, tool holder HSK 63, spindle speed 20,000 rpm, through-spindle coolant 50 bar, belt filter, coolant temperature control, spindle cooling, chip conveyor, electrical and control cabinets – Operating hours: 26,558.

Stanje: dober (rabljeno), Leto izdelave: 2000, obratovalne ure: 10.000 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.105 mm, premer struženja: 610 mm, največja hitrost vretena: 3.500 obr/min, izvrtina vretena: 70 mm, potovalna razdalja osi X: 580 mm, pomik osi Y: 210 mm, pomik po osi Z: 1.137 mm, montažni premer: 63 mm, največja hitrost vrtenja: 6.000 obr/min, vrsta vhodnega toka: Klimatska naprava, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, The machine is in good condition. Major maintenance work in recent years: - 30.04.2020 Spindle overhaul CHF 35,000 - 16.07.2021 Software update (Wenk AG) CHF 1,600 - 20.06.2022 Central lubrication pump replaced CHF 400 (All prices are in CHF) Known defects: - Error message during startup - Coolant leaks out at the rear side of the milling spindle when internal cooling is activated - Overload message when the machine is cold and running at 100% rapid traverse - Over 150 various tool holders - Spare bushings for tool magazine - Spare limit switches for tool changer position monitoring - 2 pcs 3-jaw chucks, diameter 250 mm (installed during inspection) - 1 pc 3-jaw chuck, diameter 250 mm - 1 pc 3-jaw chuck, diameter 300 mm - 1 pc 4-jaw chuck, diameter 400 mm - 2 sets of hard jaws for external clamping, short version - 1 set of hard jaws for external clamping, long version - Several sets of used soft jaws - Spare filters for high-pressure system Kowap (5 pcs in stock, approx. 2 available at delivery—1 filter approx. CHF 20–25) - Coolant purification system or oil separator (custom-built) - Cabinet adapted to the tool magazine for KM63 holders, numbered with 80 slots - Specific clamping devices suitable for KM63 holders, providing direct clamping for indexable inserts - Iscar slot cutter suitable for a holder, D160 mm, width 4 mm - Gear milling cutter suitable for a holder (custom-built, for soft jaws p=1.5 mm) Ihodpsxp Hmaefx Af Tjt - Cleaning/deburring brush suitable for a holder We are happy to provide you with leasing and financing options for the machine. A viewing appointment can be arranged by mutual agreement.

Stanje: dober (rabljeno), Leto izdelave: 2015, potovalna razdalja osi X: 650 mm, pomik osi Y: 650 mm, pomik po osi Z: 650 mm, 1 Horizontal machining center Make: STARRAG HECKERT, Model: HEC 400D, Year: 2015 Control system: Siemens Sinumerik 840D Travel X/Y/Z = 650 x 650 x 650 mm Iedpfsuav H Nox Af Toht 2-station pallet changer, pallet size: 400 x 400 mm NC rotary table 360° x 0.001° 80-position tool changer Tool holder: HSK 63 Spindle speed: 15,000 rpm Internal coolant supply (IKZ) 50 bar Chip conveyor, band filter, coolant temperature control, spindle cooling Sound and control cabinets Operating hours: 43,698 Spindle hours: 5,401

Stanje: rabljeno, Leto izdelave: 2000, Tehnične podrobnosti: Pomik po osi x: 500 mm Pomik po osi y: 400 mm Pomik po osi z: 400 mm Os b: ročno pozicionirana ° Os c: ročno pozicionirana Krmiljenje: Heidenhain TNC 124 Orodni magazin: ne, ni mest Vpenjalni stožec: SK40 Hitrost vretena: 4500 obr/min Brezstopenjske pomične hitrosti X/Y/Z: maks. 14.000 mm/min Hitri pomik: 5,0 m/min Velikost mize: 700 x 500 mm Skupna priključna moč: 17 kVA Teža stroja pribl.: 2,91 t Dimenzije stroja pribl. D x Š x V: 2,0 x 2,0 x 2,5 m Ijdpou Idffjfx Af Toht CNC univerzalni vertikalni rezkalni stroj Stroj ima 5 osi. B- in C-os sta ročno pozicionirani z merilnim sistemom. B-os – nagib mize -10° / +95°, C-os – vrtenje mize 360° (ni interpolabilno, ročno izbirno preko krmiljenja). Hladilni sistem (brez črpalke). Upravljanje preko vrtljivega izmeničnega nosilca. vklj.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 14.500 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 11779, stružna dolžina: 700 mm, premer struženja: 250 mm, moč vretenovega motorja: 26.000 W, hitrost vretena (min.): 3.200 obr/min, največja hitrost vretena: 3.200 obr/min, izvrtina vretena: 65 mm, skupna masa: 8.500 kg, includes 2x Hainbuch/Ortlieb chucks, Ihjderdy Uqspfx Af Tot conveyor belt, swivelling probe with 2 heads, MANUAL GUIDE dialog programming, high-pressure pump 18 bar/20 l/min, SBS tool breakage monitoring, wear control Machine year: 2013 – Commissioned: 05/2014 good & well-maintained condition original price approx. €300,000 !!! ATTENTION -> Sale without loader !!!

Leto izdelave: 1979, Stanje: pripravljen za uporabo (rabljen), Maks. brusni premer: 300 mm, Maks. brusna dolžina: 1950 mm, Maks. dolžina obdelovanca: 2000 mm Maks. hitrost podajanja: 1 – 30 m/min Dovod hladilne tekočine: 100 l/min Neskončno nastavljiv razpon hitrosti: 2.000 – 6.000 min⁻¹ (vrt/min) Iedpfx Ajhq Uigof Tsht Vreteno: 88 mm Višina konic: 150 mm Brusni koluti: 100 – 250 mm Moč vretena: 3,5 kW Moč brusilke: 15 kW – 380 V – 50 Hz

Leto izdelave: 2020, Stanje: novo, DESCRIPTION The so-called half water is produced from the demineralized water station using ion exchange technology. The station consists of 3 columns: - Strongly acidic cation exchanger operated in the sodium cycle, - Strongly basic anion exchanger operated in the chloride cycle, - Carbon filter Our demineralization stations RDI-2 / RDI-4 are equipped with fully automatic control heads. Pipes The columns are made of AISI316L stainless steel. Ihedjfz Nakopfx Af Tjt

Leto izdelave: 1999, Stanje: pripravljen za uporabo (rabljen), Travel path X/Y/Z: 1050mm/800mm/880mm, B-axis: 360°, table dimensions X/Y: 630mm/630mm, number of pallets: 2, max. workpiece weight: 1500kg, spindle speed: 7000rpm, tool holder: SK50, power: 30kW, tool stations: 80, max. tool diameter: 135mm/260mm, max. tool weight: 30kg, rapid traverse: 40m/min. Machine dimensions X/Y/Z: approx. 6400mm/2600mm/3200mm, weight: approx. 19700kg, control: Mazatrol 640M PC-Fusion-CNC. Includes double pallet changer for 630mm/630mm pallets. Documentation available. On-site inspection possible. Ihodpfxovnd Sue Af Tjt

Stanje: rabljeno, Leto izdelave: 1999, Technical Details: X-axis travel: 3,500 mm Y-axis travel: 2,200 mm Iedpou Nc Emjfx Af Toht Z-axis travel: 1,200 mm C-axis: +/- 200° Control: Heidenhain TNC 426 Spindle speed (left rotation): max. 10,000 rpm Spindle speed (right rotation): max. 10,000 rpm Distance between columns: 2,500 mm Distance spindle / table (vertical): 1,230 mm Clamping area (table): 3,000 x 2,000 mm Table load capacity: 10 t Tool holder: HSK A 63 Feed rate (X/Y/Z): max. 20 m/min Compressed air: 8 bar Total power requirement: approx. 100 kW Machine weight approx.: 40,000 kg Machine dimensions: 18.0 x 6.0 x 5.8 m 5-Axis Gantry Milling Machine Milling spindle: Manufacturer Hauser, type HS 256A-01 Uni, max. speed 10,000 rpm, direct drive Milling head: Manufacturer Hamül, fork-type design, A-axis integrated, rotation angle +/- 110° Tool changer: Manufacturer Hamül, rotary indexing table with turntable design, for 32 tool positions Chip conveyors: 2 piece(s) hinge-belt conveyor, manufacturer DGS with water tank, insert length 8,500 mm Combined oil-water chiller unit by BKW, type DL 55V-2KK, output 2.41 l/min, for hydraulic oil and spindle cooling Coolant system: Belt filter, manufacturer DGS, type SBF 150 Operation: via operator console type Heidenhain LE 426 X-, Y-, and Z-axis with Heidenhain linear encoders Handheld operating device HR 410 Hydraulic weight compensation (Z-axis) Equipment: Enclosure (protective walls with windows and safety doors) Hydraulic system Work area lighting

Leto izdelave: 2002, Stanje: zelo dobro (rabljeno),