Obdelovalni center

Starrag-Heckert HEC400D

Stanje: dober (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Make: STARRAG HECKERT, Model: HEC 400D, Year of manufacture: 2008, CNC control by Siemens, Type Sinumerik 840D, Travel distances X/Y/Z: 650 x 650 x 650 mm, 2-station pallet changer, Pallet size: 400 x 400 mm, NC rotary table 360° in 0.001° increments, 80-position tool changer, Tool holder: HSK 63, Maximum spindle speed: 15,000 rpm, Internal coolant supply (ICS) 50 bar, Coolant temperature control, Belt filter, Chip conveyor, Spindle cooling, Preparation for infrared probe, Operating hours: 56,194; Spindle hours: 9,196 Gtodpfx Aeuav Igjfqst

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, transportni trak za ostružke, Control: FANUC 18i-MB Travel X / Y / Z: 1,020 / 510 / 510 mm Godetz T Smopfx Afqett Feed rate X / Y / Z: 1 - 10,000 mm/min Rapid traverse X / Y / Z: 48,000 mm/min Table size (W x D): 1,200 x 510 mm Spindle speed: 15,000 rpm Internal coolant: 20 bar Tool holder: BT 40 Tool changer: 48 positions Weight: approx. 7,500 kg Dimensions (W x D x H): approx. 3,100 x 2,200 x 2,900 mm Hours: Spindle hours: 9,310 Accessories: RENISHAW tool measurement system Type: OMP 40, coolant tank, machine manual, machine lamp, chip conveyor

Stanje: dober (rabljeno), Leto izdelave: 2015, potovalna razdalja osi X: 650 mm, pomik osi Y: 650 mm, pomik po osi Z: 650 mm, 1 Horizontal machining center Make: STARRAG HECKERT, Model: HEC 400D, Year: 2015 Control system: Siemens Sinumerik 840D Travel X/Y/Z = 650 x 650 x 650 mm 2-station pallet changer, pallet size: 400 x 400 mm NC rotary table 360° x 0.001° 80-position tool changer Tool holder: HSK 63 Spindle speed: 15,000 rpm Internal coolant supply (IKZ) 50 bar Chip conveyor, band filter, coolant temperature control, spindle cooling Sound and control cabinets Gtjdpsuav H Nsfx Afqst Operating hours: 43,698 Spindle hours: 5,401

Leto izdelave: 2020, Stanje: novo, DESCRIPTION Gedpfx Afofz Naksqett The so-called half water is produced from the demineralized water station using ion exchange technology. The station consists of 3 columns: - Strongly acidic cation exchanger operated in the sodium cycle, - Strongly basic anion exchanger operated in the chloride cycle, - Carbon filter Our demineralization stations RDI-2 / RDI-4 are equipped with fully automatic control heads. Pipes The columns are made of AISI316L stainless steel.

Stanje: rabljeno, Leto izdelave: 2010, potovalna razdalja osi X: 1.800 mm, pomik osi Y: 700 mm, pomik po osi Z: 700 mm, proizvajalec krmilnikov: Heidenhain, model krmilnika: iTNC 530, obremenitev mize: 1.500 kg, vrtljajska hitrost (min.): 20 obr/min, največja hitrost vrtenja: 1.800 obr/min, skupna masa: 14.000 kg, - Krmiljenje Heidenhain iTNC 530 - 5 osi Gedpfxex Ni Ezo Afqjtt - Fiksna miza z integrirano vrtljivo mizo premera 750 mm (500 kg) - Notranje hlajenje pri 40 bar - Menjalec orodij za 60 orodij (SK 40) - Rezkalna glava z osjo B - Transporter za odrezke - Razpršilna pištola - 3D Quick Set - BLUM laserski merilni sistem - Neposreden merilni sistem pomika - 2 rotirajoči čistilni okni Vpenjalna površina mize: 2100 x 700 mm Vpenjanje ISO: SK 40 Pogon vretena: 35 / 25 kW Hitri pomik: 40 m/min Menjalec orodij: 60 mest Potreben prostor cca. 5,5 x 3,5 x 2,7 m

Leto izdelave: 1999, Stanje: pripravljen za uporabo (rabljen), Travel path X/Y/Z: 1050mm/800mm/880mm, B-axis: 360°, table dimensions X/Y: 630mm/630mm, number of pallets: 2, max. workpiece weight: 1500kg, spindle speed: 7000rpm, tool holder: SK50, power: 30kW, tool stations: 80, max. tool diameter: 135mm/260mm, max. tool weight: 30kg, rapid traverse: 40m/min. Machine dimensions X/Y/Z: approx. 6400mm/2600mm/3200mm, weight: approx. 19700kg, control: Mazatrol 640M PC-Fusion-CNC. Includes double pallet changer for 630mm/630mm pallets. Documentation available. On-site inspection possible. Gtodpovnd Suefx Afqot

Leto izdelave: 2002, Stanje: zelo dobro (rabljeno),

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Control: Siemens 840-D Travel X: 1450 mm (longitudinal) Travel Y: 1100 mm (vertical) Travel Z: 1300 mm Pallet size: 800 x 1000 mm Table load capacity: 2000 kg NC rotary table with direct drive Positioning accuracy: 0.001° Max. rotary table speed: 60 rpm Rapid traverse: 60 m/min Spindle motor: 50 kW (25%) / 28 kW (100%) Spindle torque: 1210 Nm / 680 Nm Spindle speed: 6000 rpm Spindle taper: HSK 100 Tool changer: 80 positions Max. tool diameter: 325 mm Max. tool length: 800 mm Max. tool weight: 35 kg Workpiece diameter: 1600 mm Workpiece height: 1400 mm Workpiece weight: 2000 kg Coolant through spindle Coolant shower Tool breakage detection in tool changer Godpfevgxfyox Afqott Spindle motor load monitoring Spindle extension by 100 mm Electronic handwheel The machine is supplied with many tools.

Stanje: dober (rabljeno), Leto izdelave: 2000, obratovalne ure: 10.000 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.105 mm, premer struženja: 610 mm, največja hitrost vretena: 3.500 obr/min, izvrtina vretena: 70 mm, potovalna razdalja osi X: 580 mm, pomik osi Y: 210 mm, pomik po osi Z: 1.137 mm, montažni premer: 63 mm, največja hitrost vrtenja: 6.000 obr/min, vrsta vhodnega toka: Klimatska naprava, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, The machine is in good condition. Major maintenance work in recent years: - 30.04.2020 Spindle overhaul CHF 35,000 - 16.07.2021 Software update (Wenk AG) CHF 1,600 - 20.06.2022 Central lubrication pump replaced CHF 400 (All prices are in CHF) Known defects: - Error message during startup - Coolant leaks out at the rear side of the milling spindle when internal cooling is activated - Overload message when the machine is cold and running at 100% rapid traverse - Over 150 various tool holders - Spare bushings for tool magazine - Spare limit switches for tool changer position monitoring - 2 pcs 3-jaw chucks, diameter 250 mm (installed during inspection) Gsdpfx Aexp Hmaefqjtt - 1 pc 3-jaw chuck, diameter 250 mm - 1 pc 3-jaw chuck, diameter 300 mm - 1 pc 4-jaw chuck, diameter 400 mm - 2 sets of hard jaws for external clamping, short version - 1 set of hard jaws for external clamping, long version - Several sets of used soft jaws - Spare filters for high-pressure system Kowap (5 pcs in stock, approx. 2 available at delivery—1 filter approx. CHF 20–25) - Coolant purification system or oil separator (custom-built) - Cabinet adapted to the tool magazine for KM63 holders, numbered with 80 slots - Specific clamping devices suitable for KM63 holders, providing direct clamping for indexable inserts - Iscar slot cutter suitable for a holder, D160 mm, width 4 mm - Gear milling cutter suitable for a holder (custom-built, for soft jaws p=1.5 mm) - Cleaning/deburring brush suitable for a holder We are happy to provide you with leasing and financing options for the machine. A viewing appointment can be arranged by mutual agreement.

Stanje: dober (rabljeno), Leto izdelave: 2002, Control system HEIDENHAIN TNC 430 Spindle speed 20 - 9,000 rpm Travels X = 500, Y = 400, Z = 400 mm Tool holder SK 40 Tool changer with 16 stations Gtjdpfx Ajwglfxofqst Rotary table with B and C axis Clamping area Ø 700 x 500 mm Max. table load 200 kg Infrared probe for workpiece measurement