Avtomatski stružnica

STAR Micronics SV-38R

Stanje: rabljeno, Leto izdelave: 2005, x-os: 600 mm y-os: 500 mm z-os: 600 mm Nedsvxwq Eopfx Abielg Nadzorni sistem iTNC 530 Heidenhain Površina za namestitev obdelovanca: 900 x 500 mm Število vrtljajev vretena – brezstopenjsko: 0–12.000 vrt/min Motor vretena: 10 kW Nosilec orodja: SK40 DIN 69871 Magazin za orodja: 24 Skupna potrebna moč: 22 kW Teža stroja: pribl. 6,4 t Potreben prostor: pribl. 5,3 x 3,5 x 3,5 m Odstranjevalnik stržen: verižni transporter Sistem za hlajenje: 3 črpalke / vložkovni filter Visokotlačna črpalka Grundfoss, tip CRK2-220/22 A-W-A-AUUV

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 25.4 mm - Max. machining length: 200 mm - Spindle speed: 10,000 rpm - Minimum C-axis resolution: 0.1° SUB SPINDLE - Max. bar diameter: 20 mm - Spindle speed: 10,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.1° - Number of toolholders: 2 TOOLHOLDER 1 - Number of stations: 5 TOOLHOLDER 2 - Number of stations: 5 - Number of driven stations: 4 - Driven tool speed: 8,000 rpm FRONT TOOL POST - Number of stations: 4 - Number of driven stations: 4 - Driven tool speed: 6,000 rpm BACK MACHINING - Number of stations: 7 - Number of driven stations: 3 - Driven tool speed: 8,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 14 kW WEIGHT AND DIMENSIONS - Floor space required: 2270 x 1650 mm - Machine height: 2200 mm - Machine weight: 3,500 kg MACHINE HOURS Nedpfxjuha Ugs Abiolg - Operating hours: 80,490 h EQUIPMENT - Control system: Fanuc - Driven tool motorization at: S2, S3, S5, S6 - Driven guide bushing - Parts catcher - Parts ejector - Chip conveyor - Coolant tank * with high-pressure pump - Bar feeder: ROBOBAR SBF 532 - Oil mist extraction - Coolant reservoir

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, 3 stružna centra Miyano ABX-51SYY2 Letnik izdelave: 2016, 2018, 2019, 2021 Naprava za podajanje materiala Alps ASR RX45/51EV Nadzorni sistem Fanuc 31i-B Odstranjevalec ostankov 1 glavna vretena 1 protiveno 2 neodvisni vrtljaki, vsak z 12 položaji Y-os na obeh vrtljakih Motorizirana orodja Kompenzacija temperature Komplet orodij Nledpfxozq Aqdj Abijg Naprava za podajanje materiala Alps Tool ASR RX 51Ev Navodila za uporabo Stroji so na voljo od oktobra 2026.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2015, Max. premer obdelovanca: 400 mm Max. dolžina obdelovanca: 300 mm Max. premer vpenjalne glave: 500 mm Obodni premer: 520 mm Pomik osi X: 1.110 mm Nledpoxy Ac Ssfx Abieg Pomik osi Z: 595 mm Glavno vreteno: moč (pri 40 / 100 % ED): 47/34 kW Glavno vreteno: navor (pri 40 / 100 % ED): 600 Nm Glavno vreteno: največje število vrt./min: 2.850 Krmilje: Fanuc 31i Brez Y osi

Stanje: novo, Pressure: 8.5 kN Stroke: 40 mm Throat depth: 95 mm Working height from/to: 95 - 240 mm Table surface: 160 x 110 mm Spindle diameter: 25 mm Machine weight: approx. 27 kg Dimensions (L x W x H): 160 x 230 mm Direct-acting pneumatic presses deliver the full pressing force throughout the entire stroke length. They are used primarily when long-stroke parts need to be processed with consistent force. Outstanding Engineering: Nsdpfsfv Awajx Abijlg • Long and precise spindle guidance for maximum dimensional accuracy • Hardened and ground piston rod for virtually unlimited service life • Double-acting cylinder with end position cushioning on both sides • Double guide rings on the piston for constant, smooth operation • Oil-resistant sealing elements Special features of the PND series: • Spindle secured against rotation • Spindle return on PND 85/S via only one cylinder chamber – saves additional air • Working height fine adjustment is easy, fast and precise in 2 steps: – Basic adjustment by simply loosening the clamping screws on the stand – Precision fine adjustment via the stroke limitation ring on the piston rod Additional advantage: Faster cycle times and air savings

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 1.200 mm, pomik po osi Z: 1.500 mm, največja hitrost vretena: 3.000 obr/min, hitrost vretena (min.): 20 obr/min, širina mize: 1.000 mm, dolžina mize: 4.200 mm, RepairFIT by Dornhöfer The Difference. Including installation & commissioning! Nsdpfxey T Ellj Abielg TECHNICAL MAIN DATA Year of manufacture: 2007 Capacities / Travels: Longitudinal (X): 4,000 mm Transversal (Y): 1,200 mm Vertical (Z): 1,500 mm Table size: Length: 4,200 mm Width: 1,000 mm T-slot width: H9 Reference slot: H7 Paint finish: RAL 5010 and RAL 9002 Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Drive power: 30 kW Spindle speed range: Spindle speed: 20–3,000 rpm Feed rates: X, Y, and Z axes: 2 – 12,000 mm/min Max. rapid traverse speed: X, Y, and Z axes: 15,000 mm/min Weight: approx. 22,000 kg HEIDENHAIN iTNC 530 Automatic MTE Diagonal Milling Head Coolant system RepairFIT is our proven offering for a profitable entry into our product lines. Machines available in this line are sourced through a strict selection process and subjected to a thorough inspection (Deep-Dive-Check) by our team. After intensive cleaning, any obvious defects and faults detected are professionally rectified by our expert service team.

Stanje: dober (rabljeno), Leto izdelave: 2004, Peripheral devices Brand: Tool-Temp Model: TT-157E Available: 14 units Nljdoh Hbpwepfx Abisg

Stanje: rabljeno, Leto izdelave: 1966, max. pulling force 5 t, max. stroke 850 mm, max. cutting speed 12 m/min, max. return speed 25 m/min, clamping area 410 x 575 mm, groove width 3 - 90 mm, bore diameter 13 - 500 mm, workpiece weight: 6,000 kg, depth of machine base below floor level 1,400 mm Nledpfxjcm Elno Abisg

Leto izdelave: 2005, stanje: rabljeno, Os X: 500 mm, os Y: 450 mm, os Z: 400 mm, mere vrtljive mize: 630 x 500 mm, največja nosilnost mize: 200 kg, obseg vrtenja: -5 do 110°, brezstopenjsko nastavljiva hitrost vrtenja: 20–10.000/min, nazivna moč pogona (100%/40% ED): 9 kW/13 kW, navor (40% ED): 82 Nm, natančnost vhoda: 0,01 mm, toleranca položaja: 0,010 mm, hitrost hitrega premika: 24 m/min, hitrost podajanja: 20 m/min, število mest za orodje SK40 (DIN 69871): 30, premer orodja (odvisno od hitrosti vrtenja): D80–D130, največja dolžina orodja: 290 mm, največja teža orodja: 6 kg, priključna moč: 17 kW, upravljalni sistem: Siemens 840D Powerline Shop Mill, dolžina: 4860 mm, širina: 4350 mm, višina: 2424 mm, dimenzije za transport: 2210 x 2120 x 2150 mm, teža: 4,05 t, skupno število delovnih ur: 35.880 ur, število ur delovanja vretena: 9609 ur. Oprema: digitalni pogon in hidravlična vpenjalna glava (samo za pozicioniranje), elektronska indikacija kota in transformacija ravnine, verižni magazin z dvojnim prijemalom, dodatna vrata kabine na desni strani, sistem za hlajenje 80 l, preklop med pihanjem hladilnega sredstva in zračnim curkom, brizgalna pištola, shema za zbiralnik olja, vmesnik MDE (stroj vklopljen, stroj deluje, števec kosov), dokumentacija v nemškem jeziku, 3D model stroja za kinematiko simulacije v programskem sistemu CAM (format iges, STEP), številni držali za orodje SK40 (DIN 69871), merilni senzor infrardeči Heidenhain TS641, elektronsko ročno kolo, dodatni vmesnik V24 RS232 na omarici. Ogled na kraju samem je mogoč. Nljdpfezxr Rcjx Abieg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, obratovalne ure: 29.000 h, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, The INDEX C200 – year of manufacture 2009 – is a high-performance CNC production turning machine equipped with a FANUC 31i control, main spindle and counter spindle, and a 65 mm bar capacity. The machine features a premium three-turret configuration: Turrets 1 and 2 each offer X, Z, and Y axes, while Turret 3 is dedicated to operations on the counter spindle. All three disk turrets are fitted with 10 stations each and support driven tools up to 6,000 rpm, allowing for highly flexible complete machining operations. With a gantry loader, conveyor belt, C-axis on both main and counter spindles, and powerful spindle drives, this machine is especially suitable for productive series manufacturing of complex turned and milled parts. Control: FANUC 31i Configuration: Machine with 3 tool carriers / 3 disk turrets Bar capacity: 65 mm Machine bed: vertically arranged grey cast iron bed Main spindle: Spindle 4 Counter spindle: Spindle 5 with Z-axis Spindles Main spindle Bar capacity: 65 mm Front bearing spindle diameter: 110 mm Spindle nose: ISO 702/1, size 140 cylindrical Chuck diameter: 160 mm Power: 25 kW at 100% duty cycle / 33 kW at 40% duty cycle Torque: 112 Nm at 100% duty cycle / 150 Nm at 40% duty cycle Speed: 5,000 rpm C-axis: Resolution 0.001° Counter spindle Bar capacity: 65 mm Front bearing spindle diameter: 110 mm Spindle nose: ISO 702/1, size 140 cylindrical Chuck diameter: 160 mm Power: 25 kW at 100% duty cycle / 33 kW at 40% duty cycle Torque: 112 Nm at 100% duty cycle / 150 Nm at 40% duty cycle Speed: 5,000 rpm C-axis: Resolution 0.001° Z-axis (counter spindle): 700 mm travel Rapid traverse Z-axis: 50 m/min Tool carriers / Turrets Equipped with 3 disk turrets, each with 10 stations. Tool system for 10 stations: DIN 69880 cylindrical shank – Ø30 x 55 mm. Nsdpfx Asy Tmhzsbiolg Tool carrier 1 X, Z, Y axes 10 stations X-axis: 110 mm Z-axis: 320 / 550 mm (as per documentation) Y-axis: 100 mm, ±50 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Tool carrier 2 X, Z, Y axes 10 stations X-axis: 110 mm Z-axis: 550 mm Y-axis: 100 mm, ±50 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Tool carrier 3 X-axis 10 stations Dedicated exclusively for machining on the counter spindle X-axis: 180 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Further technical equipment as per documentation: - Gantry loader system with numerically controlled Z-axis - Workpiece unloading from main or counter spindle to conveyor belt - Remnant part removal from the main spindle into remnant container Gantry loader: Traverse speed: 100 m/min Traverse range: 70 mm Max. workpiece diameter: 90 mm Max. workpiece length: 250 mm Max. remnant length: 250 mm Max. workpiece weight: 3.5 kg Hydraulic system: Delivery rate: 19 l/min System pressure: 90 bar Hydraulic tank: 40 l Cooling circuit: Delivery rate: 19 l/min Cooling unit power: 13 kW Coolant system: Pump output: 80 l/min / 8 bar Tank capacity: 300 l Chip conveyor: Chip discharge height: 1,250 mm