Avtomatski stružnica

STAR Micronics SB-20 type E

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, obratovalne ure: 346 h, število osi: 5, This 5-axis Hurco CNC TMX 8 MYSi was manufactured in 2023. It features a maximum turning diameter of 508 mm and a turning length of 560 mm, with a main spindle speed of 4,500 rpm and a sub-spindle speed of 6,000 rpm. The machine is equipped with a 12-station tool turret and a rapid traverse rate of 24 m/min on the X-axis. If you are looking for high-quality turning and milling capabilities, the Hurco CNC TMX 8 MYSi turning-milling center should be considered. Contact us for further details. • X-axis travel: 203 mm • Y-axis travel: ±55 mm • Z-axis travel: 560 mm • W-axis travel: 640 mm • Rapid traverse X/Y/Z/W: 24 / 12 / 30 / 30 m/min • Positioning accuracy: 0.01 mm • Repeatability: 0.005 mm • Max. turning diameter: 508 mm • Max. turning length: 560 mm • Max. workpiece diameter over bed: 335 mm • Tool turret: VDI 40 • Number of stations: 12 • Max. driven tool speed: 5,000 rpm • Driven tool power: 6.3 kW • Driven tool torque: 28 Nm • Max. main spindle speed: 4,500 rpm • Max. sub-spindle speed: 6,000 rpm • Synchronizing spindle speed: 2,500 rpm • Main spindle power (S6 / S1): 25 / 17.2 kW • Sub-spindle power (S6 / S1): 15 / 11 kW • Main spindle torque (S6 / S1): 239 / 164 Nm • Sub-spindle torque (S6 / S1): 102 / 75 Nm • Main spindle chuck size: 203 mm • Sub-spindle chuck size: 150 mm • Main spindle bar capacity: 64.5 mm • Sub-spindle bar pass-through: 46 mm • Electrical supply: 400 V, 50 Hz, 3 phase • Largest motor: 22 kVA Hedpfx Aqoym T Itstot • Maximum motor current: 32 A • Full load: 58 kVA • Full load current: 83 A • Short-circuit resistance: 5 kA RMS symmetric • Interruption capacity: 10,000 A • Maximum ambient temperature: 35 °C • Coolant tank capacity: 203 L • Machine weight: 7,500 kg • Transport weight: 8,250 kg • BMT65 holders are included; swiveling holders are not included.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, Na voljo je vertikalni visokozmogljiv rezkalni in navojni obdelovalni center DMG Mori. Pomik X/Y/Z: 700mm/420mm/380mm, največje dimenzije obdelovanca X/Y: 880mm/550mm, dimenzije mize X/Y: 840mm/420mm, največja obremenitev mize: 400kg, hitrost vretena: 10000 vrt/min, moč vretena: 25kW, navor: 45Nm, število orodij: 15, vpenjalno mesto orodja: BT30, hitro pomikanje: 60m/min, podajalna sila: 5kN. Dimenzije stroja X/Y/Z: pribl. 1650mm/2350mm/2500mm, masa: pribl. 4000kg, krmiljenje: Siemens Sinumerik 840D Solutionline, delovne ure stroja: 28892h, ure vretena: 12674h. Dokumentacija je na voljo. Ogled na lokaciji je mogoč. Hsdpfeynlu Uox Aqtst

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 25.4 mm - Max. machining length: 200 mm - Spindle speed: 10,000 rpm - Minimum C-axis resolution: 0.1° SUB SPINDLE - Max. bar diameter: 20 mm - Spindle speed: 10,000 rpm - Spindle drive power: 3.7 kW - Minimum C-axis resolution: 0.1° - Number of toolholders: 2 TOOLHOLDER 1 - Number of stations: 5 TOOLHOLDER 2 - Number of stations: 5 - Number of driven stations: 4 - Driven tool speed: 8,000 rpm FRONT TOOL POST - Number of stations: 4 Hjdpouha Ugofx Aqtst - Number of driven stations: 4 - Driven tool speed: 6,000 rpm BACK MACHINING - Number of stations: 7 - Number of driven stations: 3 - Driven tool speed: 8,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 14 kW WEIGHT AND DIMENSIONS - Floor space required: 2270 x 1650 mm - Machine height: 2200 mm - Machine weight: 3,500 kg MACHINE HOURS - Operating hours: 80,490 h EQUIPMENT - Control system: Fanuc - Driven tool motorization at: S2, S3, S5, S6 - Driven guide bushing - Parts catcher - Parts ejector - Chip conveyor - Coolant tank * with high-pressure pump - Bar feeder: ROBOBAR SBF 532 - Oil mist extraction - Coolant reservoir

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Nakamura Super Mill WY-250 CNC Lathe Capacity: Max. turning diameter: 215 mm Standard turning diameter: 150 mm Distance between centres: max. 870 mm / min. 250 mm Max. turning length: 580 mm Bar capacity left/right: L: 65 mm R: 51 mm Chuck size: left: 210 mm (8″) right: 165 mm (6″) Axis travels: Slide travel (X1 / X2): 160.5 mm / 160 mm Slide travel (Z1 / Z2): 580 mm / 580 mm Slide travel (Y1 / Y2): ±50 mm / -50 mm, +20 mm Slide travel (B2 axis): 620 mm Rapid traverse X1 / X2: 18 m/min Rapid traverse Z1 / Z2: 36 m/min Rapid traverse B2 axis: 36 m/min Rapid traverse Y1 / Y2: 10 m/min Main and sub spindle: Spindle speed: 4500 rpm / 5000 rpm Speed range: stepless / stepless Spindle nose: A2-6 / A2-5 Spindle bore: 80 mm / 63 mm Front bearing internal diameter: 110 mm / 90 mm Draw tube bore: 66 mm / 52 mm C-axes: Minimum input increment: 0.001° Minimum command increment: 0.001° Max. indexing speed: 600 rpm Feed speed: 1–4800 mm/min Hodsy Ipp Rjpfx Aqtot C-axis brake: disc brake C-axis positioning time: 1.5 s Upper/lower turret: Turret type: 12-station drum turret Number of tool stations: 48 (2 x 24) Tool size, square shank: 25 mm Tool size, round shank: 32 mm Driven tools: Drive system: single drive Tool spindle speed: 6000 rpm / 3600 rpm Speed range: stepless Number of tool stations: 12 × 2 Collet size: ER32 Straight tool holder range: 2 mm – 20 mm Cross tool holder range: 2 mm – 20 mm Drive power and torque: Left spindle: 18.5 / 11 kW 225 / 185 Nm Right spindle: 15 / 11 kW 120 / 120 Nm Tool spindles: 7.5 / 3.7 kW 40 / 16 Nm General: Machine height: 2395 mm (without extraction) Floor space: 4436 mm × 2674 mm / 4905 mm × 3331 mm Machine weight: 14,000 kg Scope of delivery as per photos, includes among others: Nakamura lathe, tool holders (driven and static), collets, complete operating documentation, gantry loader and loading robot, Iemca Master 880 Verso bar feeder, peripheral devices (chip conveyor, transformer, oil mist separator, etc.) No guarantee is given for the accuracy, completeness, or currency of the information provided.

Stanje: rabljeno, Leto izdelave: 2001, STAR vzdolžni stružni stroj S16-R, letnik 2001 naprej. Vzdolžni stružni stroj SA16-R, Ø16mm z magazinom FMB Minimag. Odbirno vreteno. Transportni trak za dele. Hladilni sistem je deloval samo z oljem. Brez transporterja za ostružke. Hsdoxmurrspfx Aqtet

Stanje: skoraj kot novo (rabljeno), Bezsrediščni brusilni stroj ESTARTA 301 CNC Hedpexfqzmofx Aqtet

Stanje: rabljeno, Leto izdelave: 1996, Technical Details: Grinding diameter: 1.5 - 75 mm Grinding wheel diameter: 400 mm Grinding wheel width: 160 mm Work stroke: 0 - 1 mm Feed rate: stepless / continuous mm/min Grinding wheel speed: 1300 rpm Control system for program: Num 1020 GC Total power requirement: 14 kW Hedpfxeu Ngyzj Aqtjt Machine weight approx.: 3.8 t Machine dimensions: 3.0x2.2x2.2 m Dimensions control cabinet (LxWxH): 1.5x0.4x2.0 m CENTERLESS EXTERNAL CYLINDRICAL GRINDING MACHINE for alloyed round steels as well as (plunge-cut method) through-feed method - Maximum plunge length in the plunge-cut method: 160 mm. - Automatic workpiece discharge via rail (its function/operation is not known to WMW AG) - Grinding wheel with dresser device, speed = 1300 rpm. - Regulating wheel with dresser device, approach angle right 0-6° and left 0-2°; wheel size 280x160 mm - Automatic grinding wheel balancing system Condition: Reference run not possible Machine does not operate in automatic mode Accessories: Various grinding and regulating wheels available on request

Stanje: dober (rabljeno), Leto izdelave: 2004, Peripheral devices Brand: Tool-Temp Model: TT-157E Hedpfxsh Hbpwo Aqtot Available: 14 units

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, največja hitrost vretena: 3.300 obr/min, moč vretenovega motorja: 30.000 W, skupna masa: 9.100 kg, proizvajalec krmilnikov: MAZATROL, model krmilnika: Mazatrol Matrix, število osi: 3, This 3-axis Mazak QT Nexus 350 II M was manufactured in 2008. It is equipped with a Mazatrol Matrix control unit, offering a maximum swing over bed of Ø 830 mm and a turning length of 1500 mm. The spindle supports speeds up to 3300 rpm with a power output of 30 kW. The machine comes fitted with a chip conveyor and a tool presetter. If you are looking for high-quality turning capabilities, you should consider the Mazak QT Nexus 350 II M we have for sale. Contact us for further information. Additional Equipment • Chip conveyor • Tool presetter • Autoblock chuck • Tool holders • User and maintenance manuals Machine Advantages Technical Machine Advantages • Max. turning diameter: Ø 420 mm • Max. turning length: 1500 mm • Bar capacity: Ø 102 mm • Spindle nose: ASA 11" • Chuck type: Autoblock Ø 315 mm • Tool size: 25 × 25 mm / Ø 50 mm • Driven tooling motor power: 7.5 kW Hsdpfsx D I Riox Aqtst • Max. speed of driven tooling: 4000 rpm Additional Information The machine is still under power

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen,