Hurco CNC TMX 8 MYSi
Hurco CNC TMX 8 MYSi

Name: Hurco CNC TMX 8 MYSi
Brand: Hurco
Availability: InStock

Leto izdelave

2023

Stanje

Rabljeno

Lokacija

Nemčija

Hurco CNC TMX 8 MYSi Hurco CNC TMX 8 MYSi

Podatki o stroju

Oznaka stroja:: Hurco CNC TMX 8 MYSi

Proizvajalec:: Hurco

Model:: CNC TMX 8 MYSi

Leto izdelave:: 2023

Stanje:: pripravljen za uporabo (rabljen)

Obratovalne ure:: 346 h

Cena in lokacija

Lokacija:: , Nemčija

Pokliči

Tehnične podrobnosti

Število osi:: 5

Podrobnosti ponudbe

ID oglasa:: A21330767

Referenčna številka:: DE-TUR-HUR-2023-00001

Posodobitev:: nazadnje dne 26.02.2026

Opis

This 5-axis Hurco CNC TMX 8 MYSi was manufactured in 2023. It features a maximum turning diameter of 508 mm and a turning length of 560 mm, with a main spindle speed of 4,500 rpm and a sub-spindle speed of 6,000 rpm. The machine is equipped with a 12-station tool turret and a rapid traverse rate of 24 m/min on the X-axis. If you are looking for high-quality turning and milling capabilities, the Hurco CNC TMX 8 MYSi turning-milling center should be considered. Contact us for further details.

• X-axis travel: 203 mm
• Y-axis travel: ±55 mm
• Z-axis travel: 560 mm
• W-axis travel: 640 mm
• Rapid traverse X/Y/Z/W: 24 / 12 / 30 / 30 m/min
• Positioning accuracy: 0.01 mm
• Repeatability: 0.005 mm
• Max. turning diameter: 508 mm
• Max. turning length: 560 mm
• Max. workpiece diameter over bed: 335 mm
• Tool turret: VDI 40
• Number of stations: 12
• Max. driven tool speed: 5,000 rpm
• Driven tool power: 6.3 kW
• Driven tool torque: 28 Nm
• Max. main spindle speed: 4,500 rpm
• Max. sub-spindle speed: 6,000 rpm
• Synchronizing spindle speed: 2,500 rpm
• Main spindle power (S6 / S1): 25 / 17.2 kW
• Sub-spindle power (S6 / S1): 15 / 11 kW
• Main spindle torque (S6 / S1): 239 / 164 Nm
• Sub-spindle torque (S6 / S1): 102 / 75 Nm
• Main spindle chuck size: 203 mm
• Sub-spindle chuck size: 150 mm
• Main spindle bar capacity: 64.5 mm
• Sub-spindle bar pass-through: 46 mm
• Electrical supply: 400 V, 50 Hz, 3 phase
• Largest motor: 22 kVA
• Maximum motor current: 32 A
Ndodpfx Aoym T Itol Dsb
• Full load: 58 kVA
• Full load current: 83 A
• Short-circuit resistance: 5 kA RMS symmetric
• Interruption capacity: 10,000 A
• Maximum ambient temperature: 35 °C
• Coolant tank capacity: 203 L
• Machine weight: 7,500 kg
• Transport weight: 8,250 kg
• BMT65 holders are included; swiveling holders are not included.

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.

Ponudnik

Registriran od: 2017

1.384 Oglasi na spletu

Pokliči

Pošlji povpraševanje

Telefon & Faks

+49 631 7... oglasi

Ti oglasi bi vas prav tako lahko zanimali.

Mali oglas

Ennepetal

802 km

CNC stružnica
HURCOTM6

Pokliči

Stanje: rabljeno, Leto izdelave: 2010, Premer struženja nad ležiščem: 316 mm Dolžina struženja: 340 mm Krmiljenje: ultimax Hurco Premer struženja nad vozičkom: 240 mm Obhodni premer: 402,5 mm Vretena hitrost - brezstopenjsko: 0-6000 obr/min Vrtina vretena: 45 mm Pomiki: 0-30 m/min Nedpsydqpiefx Al Djdb Obratovalna napetost: 400 V Priključna moč: 14 kW Prehod sani: 185 mm Prehod vzdolžni: 340 mm Prostorske zahteve pribl.: 3,76 x 2,92 x 2,15 m Premer vpenjanja VDI: 20 mm Glavni pogonski motor: 11,5 kW Teža stroja pribl.: 3,2 t Z 12-pozicijsko revolversko glavo in podajalnikom palic.

Poglej podrobnosti

Mali oglas

Skladiščno dvigalo Kardex Shuttle NT2000 Shuttle NT2000

Lutterworth

1.365 km

Skladiščno dvigalo
Kardex Shuttle NT2000Shuttle NT2000

Pokliči

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: NT2000, skupna višina: 4.300 mm, skupna širina: 3.300 mm, skupna dolžina: 2.980 mm, nosilnost na odsek shranjevanja: 250 kg, gradbena višina: 435.000 mm, vhodna napetost: 415 V, trajanje garancije: 12 meseci, nosilnost: 250 kg, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, Kardex 500 Shuttle NT2000 1 kos na voljo Potreben je izolator za priključitev na omrežje 415 V, trifazni sistem, z zaščitnim vodnikom in ozemljitvijo, 16 amperov. Barva: modra in siva Največja obremenitev na eno polico: 250 kg Število polic na stroj: 20 Dimenzije stroja: višina 4300 mm, širina 3300 mm, globina 2980 mm Ndjdpsrgqxmjfx Al Dsb Dimenzije police: širina 3000 mm, globina 860 mm Možnost dostave, namestitve in 12-mesečne garancije Možnost dobave samo stroja, brez garancije Na voljo so tudi pogodbe o servisu in vzdrževanju za te stroje.

Poglej podrobnosti

Mali oglas

DOOSAN Puma 2600 SY II DOOSAN Puma 2600 SY II

Nemčija

653 km

DOOSAN Puma 2600 SY II
DOOSANPuma 2600 SY II

Pokliči

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, obratovalne ure: 18.845 h, največja hitrost vretena: 4.000 obr/min, potovalna razdalja osi X: 260 mm, pomik osi Y: 53 mm, pomik po osi Z: 830 mm, moč vretenovega motorja: 33.000 W, proizvajalec krmilnikov: SIEMENS, model krmilnika: 828D, število osi: 3, This 3-axis DOOSAN Puma 2600 SY II was manufactured in 2018 and is designed for precision horizontal turning. The machine is ideal for complex machining tasks, ensuring robust performance and durability. If you are looking for high-quality turning capabilities, you should consider the DOOSAN Puma 2600 SY II that we have for sale. Contact us for further information. Additional Equipment • Mekiload gantry loader • Renishaw Equator • Renishaw Equator • The machine comes with a rotary indexing magazine • The machine is equipped with a portal robot Advantages of the Machine Qualitative Advantages • Tool change time: 1.0 second • Maximum speed (station): 5,000 rpm • Holder for turning tools: 25 x 25 mm • Holder for boring bar: Ø50 mm • Coolant pump power: 1.5 kW Technical Advantages • Max. turning diameter over bed: 780 mm • Max. turning diameter over carriage: 630 mm • Max. turning length: 760 mm • Main spindle torque: 719 Nm • Spindle nose (main spindle): A2-8 • Sub spindle speed: 6,000 rpm • Sub spindle power (30 min): 18.2 kW • Sub spindle torque: 220 Nm • Spindle nose (sub): A2-5 • Number of stations: 24 (12 driven) Ndodpjyr R A Eofx Al Dob Additional Information Machine is still under power

Poglej podrobnosti

Mali oglas

Contamine-sur-Arve

667 km

Center za struženje/frezanje
INDEXR200

Pokliči

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Minimum C-axis resolution: 0.001° COUNTER SPINDLE - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Minimum C-axis resolution: 0.001° - Travel: 390 / 600 mm TURNING-MILLING SPINDLE - X-axis travel: 350 mm - Y-axis travel: ±80 mm - B-axis stroke: 270° - Minimum B-axis resolution: 0.001° - Tool type: HSK-T40 - Spindle speed: 18,000 rpm - Spindle drive power: 11 kW - Fixed tools on electrospindle for milling: 6 x VDI25 LOWER TURNING AND MILLING SPINDLE - Y-axis travel: ±80 mm - B-axis stroke: 270° - Minimum B-axis resolution: 0.001° - Tool type: HSK-T40 - Spindle speed: 18,000 rpm Njdjv Ig Avopfx Al Dedb - Spindle drive power: 11 kW - Fixed tools on electrospindle for milling: 6 x VDI25 TOOL CHANGER - Tool changer type: Bar loader - Number of tools in magazine: 80 - Tool change time: 4.5 s ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 68 kW WEIGHT AND DIMENSIONS - Machine height: 2,500 mm - Machine weight: 11,000 kg MACHINE HOURS - Spindle hours: 19,781 h - Turning-milling spindle hours: 9,713 h ACCESSORIES - Control: Siemens Sinumerik 840D SL - Coolant tank * with high-pressure pump * with paper filter * internal coolant supply (ICS) - Chip conveyor - Spindle cooling - Parts removal

Poglej podrobnosti

Mali oglas

Nemčija

653 km

Hurco VMX 50i
HurcoVMX 50i

Pokliči

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, obratovalne ure: 30.222 h, skupna višina: 3.240 mm, skupna masa: 8.880 kg, Ta 3-osna obdelovalna naprava tipa Hurco VMX 50i je bila izdelana leta 2014 in ima robustno delovno mizo z dimenzijami 59 x 26 palcev ter največjo hitrost vretena 12.000 vrt/min. Ponuja kapaciteto za 40 orodij in hitro menjavo orodij (ATC) v 2 sekundah. Idealna je za natančno obdelavo z visokimi zahtevami in največjo obremenitvijo mize 4.410 lb. Če iščete obdelovalno napravo visoke kakovosti, razmislite o modelu Hurco VMX 50i, ki ga ponujamo v prodajo. Za dodatne informacije nas kontaktirajte. • Revija za orodja s 30 mesti • Velikost mize: 1500 x 660 mm • T-utori: 6 x 18 mm • Največja obremenitev mize: 2000 kg • Razdalja od konice vretena do mize: 101 mm Ndsdox D E Eqjpfx Al Deb • Največja hitrost vretena: 12.000 vrt/min • Moč vretena (15 min/neprekinjen obrat): 15 kW / 11 kW pri 720 vrt/min • Navor vretena (15 min/neprekinjen obrat): 198,9 Nm / 116,7 Nm pri 720 vrt/min • Tip orodja: CAT 40 / Big Plus® • Kapaciteta za orodja: 40 • Največji premer orodja: 76 mm • Največja dolžina orodja: 300 mm • Največja teža orodja: 7 kg • Čas menjave orodja (ATC): 2 sek. Dimenzije Globina naprave: 5055 mm

Poglej podrobnosti

Mali oglas

Root

516 km

Podpredsednik
GOODY

Pokliči

Mali oglas

Vertikalni obdelovalni center HURCO VMX 42 i

Mögglingen

481 km

Vertikalni obdelovalni center
HURCOVMX 42 i

Pokliči

Mali oglas

Švedska

653 km

Okuma Multus B300-W
OkumaMultus B300-W

Pokliči

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, največja hitrost vretena: 5.000 obr/min, potovalna razdalja osi X: 580 mm, pomik osi Y: 80 mm, pomik po osi Z: 935 mm, proizvajalec krmilnikov: OKUMA, model krmilnika: OSP-P200L, število osi: 5, This 5-axis Okuma Multus B300-W was manufactured in 2006. It features a robust turning-milling center with a bed overhang of 630 mm and a maximum turning diameter of 450 mm. Equipped with a bar feeder, tool changer, and a tool magazine for 40 tools, it ensures efficient operation. The control system is an advanced Okuma OSP-P200L. If you are looking for a high-quality turning machine, you should consider the Okuma Multus B300-W we have for sale. Contact us for more information. Ndsdpfx Ajx D Rvhol Djb • ATC / tool magazine: 40 positions • Tool changer • Maximum distance between chucks: 900 mm • Maximum turning diameter: 450 mm • Sub spindle: A2-6 nose; 38–5000 rpm • Indexing: C-axis 0.001°; B-axis 0.001° Additional equipment • Bar loader IF • Approximately 60 HSK 63 tool holders • Half a pallet of soft and hardened chuck jaws • 3 spindle stops (various lengths) • Various collets

Poglej podrobnosti

Mali oglas

Mazak QT Nexus 350 II M Mazak QT Nexus 350 II M

Italija

653 km

Mazak QT Nexus 350 II M
MazakQT Nexus 350 II M

Pokliči

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, največja hitrost vretena: 3.300 obr/min, moč vretenovega motorja: 30.000 W, skupna masa: 9.100 kg, proizvajalec krmilnikov: MAZATROL, model krmilnika: Mazatrol Matrix, število osi: 3, This 3-axis Mazak QT Nexus 350 II M was manufactured in 2008. It is equipped with a Mazatrol Matrix control unit, offering a maximum swing over bed of Ø 830 mm and a turning length of 1500 mm. The spindle supports speeds up to 3300 rpm with a power output of 30 kW. The machine comes fitted with a chip conveyor and a tool presetter. If you are looking for high-quality turning capabilities, you should consider the Mazak QT Nexus 350 II M we have for sale. Contact us for further information. Additional Equipment • Chip conveyor • Tool presetter • Autoblock chuck • Tool holders • User and maintenance manuals Machine Advantages Technical Machine Advantages • Max. turning diameter: Ø 420 mm • Max. turning length: 1500 mm • Bar capacity: Ø 102 mm • Spindle nose: ASA 11" • Chuck type: Autoblock Ø 315 mm Nodpfox D I Riex Al Dsdb • Tool size: 25 × 25 mm / Ø 50 mm • Driven tooling motor power: 7.5 kW • Max. speed of driven tooling: 4000 rpm Additional Information The machine is still under power

Poglej podrobnosti

Mali oglas

Haiger

715 km

CNC stružnica
PinachoCobra 180

11.500 €

VB plus DDV

Pokliči

Leto izdelave: 2001, stanje: dober (rabljeno), Universal CNC cycle lathe by Pinacho, suitable for tooling, fixture construction, training, and mold making. Swing diameter: 360 mm Control unit: Fagor 8055 Technical Specifications: - Swing diameter: 360 mm - Distance between centers: 1000 mm - Control: Fagor 8055 - Tailstock: Morse taper 3 - Tool turret: Barufaldi, 6-position - Spindle speed: 1–4000 rpm - Electrical connection: 380 V, 5.5 kW Contact: Ndodpfxjfglzge Al Dob AWM GmbH Mr. Mario Wurm

Poglej podrobnosti

Oglašujte tukaj