Vertikalni obdelovalni center CNC

Stama MC 520

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1994, Glavni pogon Število osi: 5 Dodatna oprema Revolver za orodje: 60 pozicij SK40 z navpično verigo in dvojnim prijemalom Vrtalna zmogljivost v jeklu: 25 mm Navojna zmogljivost v jeklu: M24 Rezkalna zmogljivost v jeklu (SK30): 150 cm³/min Rezkalna zmogljivost v jeklu (SK40): 180 cm³/min Rezkalna zmogljivost v aluminiju: 500 cm³/min Transportni trak za odrezke: strgalo Kjdpfex D Sqgex Af Noll Izplakovalna pištola za spiranje odrezkov Preklop hladilno sredstvo/zrak: zunanje preko M-funkcije Infrardeča merilna sonda: Heidenhain TS 649 DMG 3D quickSET: orodje za preverjanje in korekcijo kinematične natančnosti Ta petosni STAMA MC 520 je bil proizveden leta 1994. Gre za robusten vertikalni obdelovalni center z vpenjalno površino do 3000 x 430 mm in dovoljeno nosilnostjo mize 1600 kp. Opremljen je z visokohitrostnim vretenom, ki omogoča 6000 obr/min oziroma opcijsko 10000 obr/min za učinkovito obdelavo. Stroj vključuje 60-mestni SK40 revolver za orodje ter transportni trak za odrezke s strgalom. Za več informacij o stroju nas kontaktirajte. Tip uporabe Rezkanje

Leto izdelave: 2015, Stanje: pripravljen za uporabo (rabljen), A CNC dual-spindle lathe by Traub, fully overhauled in 2025, is available. Turning length: 450 mm, spindle bore: 65 mm, max. speed: 4,000 rpm, main spindle/sub spindle power: 18.5 kW/11 kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5,000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8,000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8,000 N, feed travel: +/- 35 mm. Machine dimensions X/Y/Z: approx. 4,150 mm/2,000 mm/1,800 mm, weight: approx. 4,750 kg, control: Traub System TX 8F, operating hours: 12,938 h. Included: chip conveyor and LNS Quick Load bar feeder. Documentation available. On-site inspection possible. Kledsv Scrbopfx Af Njl

Stanje: rabljeno, Leto izdelave: 1994, Technical Details: Number of spindles: 8 Spindle passage: 32 mm Item: Cam-controlled multi-spindle automatic lathe Brand: Schütte Model: AF32 S DNT Year of manufacture: 1994 Eight-spindle automatic lathe with 8 main spindles Max. nominal bar capacity: D=32 mm Control system: Siemens SIMATIC S7 Electronic cam controller: Balluff Gripper in position 8 for rear-side machining CNC cross slide at position 6 CNC cross slide at position 7 Kedpfx Asl Su Rxjf Njll Workpiece conveyor belt KSS cooling system (Schimpke) Chip conveyor with magnetic separator Thread-cutting clutches The tooling shown may differ from the scope of delivery! Please contact us for further information and photos via email (at) or *

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, 5-osni obdelovalni center - univerzalni DECKEL MAHO DMU 70 EVO Leto izdelave: 2002 Krmiljenje: MillPlus iT Heidenhain Delovne ure stroja: 33.289,6 h Delovne ure vretena: 10.533,5 h Klsdpfx Asxf Hlhsf Nsl Tehnični podatki: x-hod: 750 mm y-hod: 600 mm z-hod: 520 mm Glavno vreteno: Območje vrtljajev glavnega vretena: 20 - 18.000 min⁻¹ Pogonska moč glavnega vretena: 35 / 25 kW Maks. navor: 130 / 87 Nm NC rotacijsko-nagibna miza: Vpenjalna površina mize: 700 x 500 mm Območje nagiba osi B: 180 ° Obračanje v osi C: 360 ° maks. obremenitev mize: 350 kg Centrična odprtina: 30 H6 mm T-utor: 7x 14H7 x 63 mm Območje vrtljajev mize: 21,5 min⁻¹ Orodni magazin: Število orodnih mest: 32 pozicij maks. dolžina orodja: 315 mm maks. premer orodja: 105 mm maks. premer orodja pri prosti sosednji posodi: 130 mm maks. teža orodja: 6 kg

Stanje: rabljeno, Leto izdelave: 2002, Swing diameter: 820 mm Turning length: 2,000 mm Control: SIN 810 D Center height over flat bed: 400 mm Swing diameter over cross slide: 500 mm X-axis travel: 540 mm Z-axis travel: 2,100 mm Feed rate X/Z axis: 0.01 - 50 mm/min Rapid traverse X-axis: 5.00 m/min Rapid traverse Z-axis: 10.00 m/min Feed force, facing: 12,500 N Feed force, longitudinal: 20,000 N Spindle speeds: 6.4 - 1,600 rpm Spindle speed gearbox stage 1: 6.40 - 376 rpm Spindle speed gearbox stage 2: 27.40 - 1,600 rpm Drive power at 60% / 100% duty cycle: 46.00 / 37.00 kW Torque at 60% / 100% duty cycle: 5,073 / 4,069 Nm Constant cutting speed: 1 - 9,999 m/min Spindle nose to DIN 55027 - size 11 Spindle diameter at front bearing: 170 mm Spindle bore: 128 mm Tailstock quill taper: MT 6 Quill diameter: 125 mm Quill stroke: 280 mm Thread pitch: 0.1 - 400 mm Klsdpfow Dvipsx Af Nol Total power requirement: 35.00 kW Machine weight approx.: 11.00 t Space requirement approx.: 6.00 x 3.00 x H2.60 m Controls: SIEMENS Sinumerik 810D, chip conveyor, tailstock, extraction system, 2 steady rests. Spindle bearing refurbished by the manufacturer in 04/2023. Machine can be inspected under power.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, This multi-axis lathe CMZ TTL-66-66-T1Y-T2Y was manufactured in 2021. It features a maximum bar diameter of 66 mm (both spindles), a turning diameter of up to 220 mm, and a main spindle power of 35.5 kW. The machine is equipped with 2 high-performance spindles with a 66 mm bar capacity, 2 turrets with 12/24 tool stations, driven tools with 14 kW and 12,000 rpm, and Y-axis for both upper and lower turret. A 35-bar high-pressure coolant system with filtration and an additional tank is included. Please refer to the attached brochure for further details or contact us directly. Equipment: - LPS for left spindle - Reduction tube for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for right spindle - Tool presetter - Side chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75 µm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75 µm filter - Coolant washing nozzle - TA/06000/10 coolant chiller, 8000 W - Machine status light - Tool life management - Tool load monitoring - Programmable automatic part catcher (pneumatic) - The parts extractor is equipped with a pneumatic gripper for part removal (opens and closes pneumatically) - Pneumatic ejector for sub spindle with 100 mm adjustable stroke, end position detected by sensor - Coolant supply through right-hand spindle - Interface for bar loader (unimag) - Preparation for extraction unit, connection flange Ø100 The machine is supplied with chip conveyor, coolant unit and tool package. It can be inspected under power and is available immediately. Operated in single-shift mode only. Klodpfsxmhdnjx Af Njl Further information available on request.

Stanje: dober (rabljeno), Leto izdelave: 2004, TRAUB TX8H CONTROL Weight: 3500 kg Dimensions (LxWxH): 3960 x 1640 x 1800 mm Power: 11 kW Spindle Speed: 5600 / 4000 rpm Torque: 200 / 280 Nm The TRAUB TNA 300 lathe is designed for machining workpieces with a turning length of up to 450 mm. --> Suitable for chip-forming metal and plastic machining with defined cutting edges using appropriate tools. --> For clamping in jaw chucks from size 160 up to approx. 250. --> For machining bar stock up to a diameter of 42 or 65 mm, respectively. --> With special EHS version workpiece removal unit --> Chip conveyor extended by 800 mm --> Technical Data Working Area Spindle bore: 42 mm --> Spindle head DIN 55026, size: A5 --> Chuck diameter: 160-175 mm / 200-250 mm --> Max. turning diameter: 275 mm --> Clearance above spindle center: 35 mm --> Max. turning length: 450 mm --> Swing diameter over cross slide: 395 mm --> Swing diameter over bed: 520 mm --> Tool Carrier Tool holders for cylindrical shank DIN 60880: 12 pcs --> Shank diameter: 30 mm --> Tool cross-section: 20x20 mm --> Indexing time, 1st position: 0.5 sec. --> Indexing time, each subsequent position: 0.15 sec. --> Feed Drives X-Axis: --> Slide travel: 210 mm --> Feed force: 5000 N --> Rapid traverse/Path speed: 15 m/min --> Z-Axis: --> Slide travel: 450 mm --> Feed force: 6000 N Klsdewwl Iuspfx Af Nol --> Rapid traverse/Path speed: 18 m/min --> Y-Axis: --> Slide travel: ±35 mm --> Feed force: 6000 N --> Rapid traverse/Path speed: 10 m/min --> C-Axis: --> Speed: 100 rpm --> Torque: 140 / 196 Nm --> Electronic resolution: 0.001 degree --> Tailstock Quill diameter: 70 mm --> Quill stroke: 60 mm --> Rapid retraction travel: 280 mm --> Quill clamping force at 55 bar: 8600 N --> Mounting per DIN 228: Mk 4 --> Steady Rest Clamping range: 8 - 95 mm --> Parts Removal Device Max. part length: 250 mm --> Max. part weight: 3 kg

Stanje: rabljeno, Leto izdelave: 1987, Technical details: Number of spindles: 8 Klodemf Aw Aspfx Af Nel

Stanje: dober (rabljeno), Leto izdelave: 1995, Stroj je v dobrem delovnem stanju. Krmilna enota TNC 426. Klsdpfxouzimno Af Nsl

Stanje: dober (rabljeno), Leto izdelave: 1997, potovalna razdalja osi X: 1.000 mm, pomik osi Y: 750 mm, pomik po osi Z: 750 mm, CNC control: Heidenhain TNC426 30-slot tool changer Electronic handwheel Chip conveyor Coolant system Technical data: Travel X / X-axis travel: 1000 mm Travel Y / Y-axis travel: 750 mm Travel Z / Z-axis travel: 750 mm Table size: 1150 x 700 mm Spindle taper: SK40 Spindle speed range: 12000 rpm Number of tool stations in ATC: 30 Machine weight approx.: 10,500 kg Klsdjua S Hrepfx Af Nel Technical data, accessories, and machine description are non-binding.