Začetna prizma 9 kosov

Stahl 240/125/H63 mm

Stanje: rabljeno, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.500 mm, pomik po osi Z: 1.500 mm, največja hitrost vretena: 6.000 obr/min, RepairFIT by Dornhöfer The Difference. Including installation & commissioning! TECHNICAL KEY DATA Year of manufacture: 2020 Travel/capacities: Longitudinal (X): 3,000 mm Vertical (Y): 1,500 mm Cross (Z): 1,500 mm Clamping surface NC rotary table: Rotary indexing table: 2,400 x 1,900 mm Max. transport load (with centrally supported load): 10,000 kg Positioning accuracy arc/sec: ± 2.5" Max. swing diameter: approx. 2,900 mm Paintwork: RAL 7024 graphite grey RAL 7038 agate grey Tool holder: DIN 69871 AD (ISO50) Big Plus Pull stud: DIN 69872 Form A Main spindle drive: Motor/brand main spindle drive Heidenhain Max. drive power: 32 kW from 376 rpm Max. torque: 1,085 Nm (constant up to 376 rpm) Speed control/gearbox: 3-stage (oil-cooled) with automatic shifting Spindle speeds 6,000 rpm: low range rpm 0-738 mid range rpm 739-1,842 high range rpm 1,843-6,000 Axis drives/axis feed rates: Axis drive motors: brand Heidenhain (digital drives) Rapid traverse max.: X, Y, and Z axis 25,000 mm/min Feed rate max.: X, Y, and Z axis 15,000 mm/min Max. average acceleration: 2 m/s² Max. feed force: X, Y, and Z axis 26,000 N Linear axis drive systems: X-axis (longitudinal): preloaded ball screw Ø 63 x 40 Z-axis (vertical): preloaded ball screw Ø 63 x 20 Y-axis (cross): preloaded ball screw Ø 50 x 20 Guide system: X-axis (longitudinal) 6 pcs. type INA RUE 55 EL Z-axis (vertical) 4 pcs. type INA RUE 65 EL Y-axis (cross): 8 pcs. type INE RUE 55 E-HL and additional damping unit Clamping table / table surface: T-slot size 10x: 22 H 12 mm Reference slot center 1x: 22 H 8 mm T-slot spacing: 150 mm (pitch spacing outer slots 1,800 mm) Weight: Weight RT3000: approx. 32,000 kg Connected load: approx. 53 KVA Heidenhain TNC 640HSCI Automatic tool changer with 80 positions Automatic oil-cooled milling head 2.5° x 1° 2 chip conveyors Coolant system with boost to 37 bar IKZ Special operating mode 4 RepairFIT is our proven offer for a profitable entry into our product lines. Cedpfx Afoygiwqsnopw Machines offered in this line are sourced by us following a strict selection process and subjected to a thorough inspection (deep-dive check). After intensive cleaning, any identified obvious defects and faults are professionally rectified by our expert service team.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, 600 kg load capacity height-adjustable welding positioner with through bore 100 - 200 mm Table diameter 700 mm Horizontal height min. 0.65 m, max. 1.25 m Tilted height min. 0.45 m, max. 0.95 m Speed from 0.01 – 1.1 rpm Tilting angle up to 135° Cpsdod Anz Rjpfx Afnjw Hand and foot remote control with speed display Very robust construction

Stanje: novo, Leto izdelave: 2025, THE PRACTICAL HAND TUBE BENDER: The compact, mobile design allows for precise and consistently repeatable bending operations in a bench vice. Operation is performed via a screw-in handle. A lockable setting ring ensures consistent, repeatable bending angles. The easily exchangeable plug-in tool system makes tool changes straightforward. The 'stationary tube and rotating tool' principle enables bending with minimal space requirements. For thin-walled tubes, slide shoes are used for crease-free bending, enabling the production of bends with minimal deformation from materials such as stainless steel and copper tubes. The optional hexagonal drive version allows, in addition to vice operation, the use of the drive force from the 3000 and 6000 bending systems. The KBV can simply be mounted onto the machine’s bending shaft for this purpose. POSSIBLE APPLICATIONS: Cjdpfx Afjng Amkonjpw • Hydraulic piping installation • Prototype fabrication • Plumbing and heating installation TECHNICAL DATA: • Bending capacity: Ø 6 to 18 mm • Manual bend angle limitation • Maximum bending angle: 180º OPTIONAL ACCESSORIES: • KBV with hexagonal drive for bending on models 3000 or 6000 • Machine case • Length stop OUR LOCAL SERVICE FOR YOU: • Welcome to test production at our on-site demonstration room • Consultation and information meeting at your facility • Consultation and processing of lease/financing purchase through JUTEC • Trade in of your current machine • Service contracts and on-site maintenance

Stanje: novo, Leto izdelave: 2024, nosilnost: 300 kg, Welding Turntable KT 300 Load capacity horizontal: 300 kg, tilted: 150 kg Power supply: 220V, 50 Hz Table diameter: 450 mm Height: 500 mm Tilting range: stepless via geared motor with hand crank, 0 - 90° Cjdpfx Aoc Ug Tlefnspw Speed: 0.3 to 2.5 rpm Includes foot pedal remote control Optional extra: Quick-release chuck Diameter 300 mm, €450

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, uporabna prostornina rezervoarja: 15.000 l, Eksterne mål: Diameter Ø 2300 mm, total højde 5500 mm. Vertikal rustfri ståltank – ét stk. tilbydes. Konisk bund, 35°, med 4" udløb. Cjdoq A R S Djpfx Afnopw Konisk top, 15°, med mandehul. Materiale: AISI 304.

Leto izdelave: 2020, stanje: skoraj kot novo (rabljeno), Welding positioner KT 300 Horizontal load capacity: 300 kg, tilted: 150 kg Power supply: 220V, 50 Hz Table diameter: 500 mm Cjdpfxjd A Etws Afnjpw Hollow shaft diameter: 140 mm Table height: 600 mm, tilted to center: 450 mm Length: 650 mm, Width: 650 mm Infinitely variable tilt range via worm gear motor: 0 – 90° Rotational speed: 0.3 – 2.5 rpm Including foot remote control Surcharge: Quick-change chuck Diameter: 400 mm, €550

Leto izdelave: 1995, stanje: dober (rabljeno), For sale is a presetting device from Mahr, model V 420. The unit is fully functional and in good condition. Technical data: Year of manufacture: 1995 Control system: Zoller DA6052B Measuring range X-axis: 150 (300) mm Measuring range Z-axis: 450 mm Magnification: 20x Fine adjustment: +/- 5mm Projection area: 80 mm Scale control: Heidenhain LS 403 Air pressure: 6 bar Weight: approx. 150 kg Space required: 2m x 1.5m x 2m Loading and/or shipping available at extra cost. Prices plus VAT. Inspection possible by appointment. Contact us – our team will be happy to assist you. Cpjdomf T Aajpfx Afnew Trade-in or exchange possible! Machinery purchase & sales BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Stanje: rabljeno, Machine weight approx. 110 kg Space requirement approx. 950 x 435 x 980 mm Cedpfxswf Rg So Afnspw The newly developed "mti inverter series" from ESS for single-phase welding machines, which has already proven itself thousands of times, is now being extended to a three-phase system. The combination of semiconductor technology, resonant inverter circuits, and classical transformer technology once again enables the integration of their respective advantages into state-of-the-art welding equipment. --> Technical data Mains connection: 3/PE AC 400 V --> Maximum primary power: 14 kVA --> Mains fuse: T 16 A --> Adjustment range: 5 - 300 A --> Stick electrodes: Ø 1.5 - 5 mm --> Protection class: IP 23 --> Water cooling unit for the welding torch: integrated

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Brand: Luna Model: 8835 18/05 Year of manufacture: 2004 Capacity: 1890 x 0.5 (250 N/mm²) Mains voltage: 3x400V / 3x230V Roller diameter: Ø 35 mm Motors: 0.75 kW Max. working speed: 7.1 m/min Machine weight: 900 kg Item no.: 6812 Complete, well-functioning CNC sheet metal roller for rolling thin material up to 0.5 mm sheet metal (250 N/mm²). Especially suitable for rolling aluminium sheets. Previously used for rolling lampshades. Machine description – Luna: "The 8835 is a roll bending machine for the production of slats and reflectors with a small radius, designed to meet the requirements of the latest small-diameter light tubes. The machine is equipped with three independent lower rollers to minimise production time. All rollers run in adjustable support bearings, allowing for easy roller adjustment for materials of different hardness and thickness. The deflection of the upper roller is corrected by a crossbar that tilts to make space for the curved piece. All rollers are hardened and chrome-plated with polished surfaces to prevent marking. The control system allows programming of parts with a constant radius and parabolic shapes. 100 programmes can be stored." Cpedpfx Ash Ngd Rofnsw Full documentation available: - Operating manual (in English) - Electrical schematics

Stanje: rabljeno, Leto izdelave: 2000, Ref. No. 24489 Technical Data: Cpjdpfx Afju Uqbkjnow - Load capacity (vertical): 100 kg - Faceplate diameter: 400 mm - Through-hole: 60 mm - Faceplate manually infinitely tiltable: 0 – 135 ° - Rotary movement infinitely variable, motor-driven: 0.05 – 5 m/min - Electric foot switch for start - stop - Table height in horizontal position (without rollers): approx. 750 mm - 3-jaw chuck - Drive: 220 V - Required space: approx. W 450 x H 850 x D 650 mm - Weight: approx. 60 kg