Varilni gramofon, gramofon,

Heinrichsglück KT 600

Stanje: dober (rabljeno), nosilnost: 600 kg, Oprema: nožno daljinsko upravljanje, Welding positioner 600 kg load capacity complete set with chuck Nodpew Ex Ahofx Abbjcl - Infinitely variable speed and tilt adjustment - Diameter: 850 mm - Height to center (vertical plate): 700 mm - Height (horizontal): 950 mm - Length: 1450 mm - Width: 950 mm - Hand and foot remote control - Tilting angle: 135° - Net weight: 750 kg - Additional charge for chuck: €400

Stanje: novo, Leto izdelave: 2024, 600 kg load capacity Ncodpfxjg Tdpgo Abbel Height-adjustable welding positioner with 100 mm through-hole Plate diameter: 700 mm Horizontal height: min. 0.65 m, max. 1.25 m Height when tilted: min. 0.45 m, max. 0.95 m Rotation speed: 0.01 – 1.3 rpm Tilting angle up to 135° Hand and foot remote control with speed display Very robust construction

Stanje: zelo dobro (rabljeno), nosilnost: 600 kg, Oprema: nožno daljinsko upravljanje, Welding turntable with 600 kg load capacity with foot remote control Nodpfxotumf Ij Abbecl Large clamping plate diameter: 950 mm Small clamping plate diameter: 600 mm Horizontal height: 1070 mm incl. feet (250 mm) Tilted height to center: 820 mm incl. feet (250 mm) Continuously variable speed from 0.01 to 2 rpm Length: 1200 mm Width: 800 mm

Stanje: novo, Bending capacity: 6.0 mm Working length: 3100 mm Material thickness: 8.0 mm Ncsdpfx Abod Ab H Hebel Total power requirement: 11.0 kW Weight approx.: 6.7 t Dimensions (LxWxH): 4,88 x 1,16 x 1,18 m Image similar Bending performance: 8.0 mm » at 3x top roll diameter. Pre-bending: 6.0 mm » at 1.5x top roll diameter. Top roll diameter: 230 mm Lower roll diameter: 210 mm Side roll diameter: 190 mm Max. opening: 30 mm Working height: 825 mm • Fully hydraulic drive of the top and bottom rolls via planetary gearboxes • Digital display for side roll positions • Hydraulic drop-end bearing • Cone bending device • Hardened rolls • Hydraulic adjustment of the side rolls, synchronized via PLC • Hydraulic adjustment of the lower roll via torsion shaft • Pressure-adjustable lower roll • Electric and hydraulic overload protection • Movable control panel • Operating manual in GERMAN and ENGLISH • Machine and equipment in compliance with CE regulations Catalog, see the following link: Important points for cone rolling: • The max. sheet thickness is 50% of the nominal capacity • Cone length must be a max. of 30% or more than 60% of the roll length • Hardened rolls are recommended

Stanje: novo, Article: Welding Positioner 50 kg Type: KT-50 without chuck Max. load: 50 kg horizontal Max. load: 25 kg vertical Rotational speed: 1–7.5 rpm Rotation direction: left and right Turntable speed: manually adjustable Turntable diameter: 315 mm Turntable height: 375 mm Turntable tilting angle: 0–90° Motor power (operating): 0.08 kW Motor power (standby): N/A Dimensions: 430 x 430 x 375 mm Weight: approx. 38 kg Ncsdpfx Asbambrobbol Power supply: AC 110V / 220V 50/60Hz Price does not include quick-release chuck and height-adjustable workbench Surcharge for quick-release chuck: €195 Packaging and shipping within Germany: approx. €80

Stanje: novo, Thread diameter M3 - M16 mm Infinitely variable speed up to max. 187 rpm Working range: 180 - 2000 mm Motor power: 0.7 kW Electric tapping machines for M3 - M16 threads, Angle adjustable. 9 quick-change chucks with slip clutch. Adjustable via display: Njdpfofg U Sqjx Abbecl Variable speed, adjustable depth, material selection, choice of main rotation direction, thread selection. Optional: Clamping table with T-slots: 990x700x800mm. Magnetic base. Also available for: M14 to M24 and M27 to M33.

Stanje: novo, Bernardo Universal Lathe Titan 660 x 2000 Technical Specifications Centre distance: 2,000 mm Centre height: 330 mm Swing diameter over bed: 660 mm Swing diameter over gap: 900 mm Swing diameter over cross slide: 460 mm Bed width: 400 mm Spindle bore: 105 mm Spindle mount: DIN 55029, D1-8 Ncjdpfx Absfbbx Robel Speed range (16): 25 – 1,600 rpm Longitudinal feed range (25): 0.044 – 1.48 mm/rev Cross feed range (25): 0.022 – 0.740 mm/rev Metric threads (54): 0.45 – 120 mm Inch threads (54): 7/16 – 80 TPI Quill diameter: 90 mm Quill travel: 235 mm Quill taper: MT 5 Motor power: 7.5 kW (10.0 HP) Machine dimensions (W x D x H): 3,630 x 1,200 x 1,520 mm Weight: approx. 2,900 kg Features Versatile applications in general engineering, production, single-part manufacturing, etc. Central, easy-to-use control for feeds and threads using leadscrew and feed shaft Prism bed made of cast iron, induction-hardened and precision-ground Modern main spindle bearing with precision angular contact roller bearings Hardened and ground gears and shafts, including in the feed gearbox Rapid traverse for longitudinal and cross feeds as standard to reduce idle times Large spindle bore (105 mm) for workpieces with large diameters Smooth start via mechanical multi-disc clutch Electromechanical foot brake for reduced idle times Excellent cutting performance even for facing operations The machine bed is reinforced with sturdy ribs to increase rigidity and minimize vibration influences Scope of delivery 3-axis digital readout ES-12 V with LCD display Slip clutch Rapid traverse longitudinal and cross LED machine light 3-jaw steel chuck PO3-315 mm / D8 Faceplate 450 mm Fixed steady rest – max. dia. 180 mm Travelling steady rest – max. dia. 120 mm 2 centre points Motor with magnetic brake according to CE standards Foot pedal with brake function according to CE Initial fill with Shell Tellus 46 Coolant system Quick-change tool post with 4 holders Protection device for quick-change tool post Change gears Reducing sleeve Chip guard Cable routing via energy chain Operating tools

Leto izdelave: 2023, Stanje: kot nova (razstavni stroj), Technical data: - Load capacity: 15,000 kg - Dead weight: 960 kg - Workpiece diameter (insertable): approx. 50 – 3,200 mm - Roller diameter: 250 mm - Roller width: 240 mm - Rotation speed: approx. 100–2,000 mm/min Ncodpfx Ajd Iuqaebbjl - Two-pedal foot switch - Potentiometer for stepless speed control

Stanje: novo, Leto izdelave: 2024, nosilnost: 300 kg, Welding rotary table Protec KT 300 H, 170/400 special version Horizontal load capacity: 300 kg, tilted load capacity: 150 kg Nedpfx Aorypmgsbbocl Power supply: 220 V, 50 Hz Table diameter: 450 mm Hollow shaft diameter: 170 mm Table height: 500 mm Welding current transmission: 400 A Quick-action chuck diameter 300 mm, surcharge €550 Quick-action chuck diameter 400 mm, surcharge €750 Crank gear motor with stepless adjustment 0–90° Infinitely variable speed: 0.01 to approx. 5 rpm Incl. foot remote control Digital display with welding time limitation (optional)

Stanje: novo, Welding positioners (turntables) increase work flexibility, productivity, and quality. Turntables also assist the welder during operations, ensuring a safe working environment and improved ergonomics. The main advantage of PEMA positioners is that workpieces can always be set to the optimal welding position. This can increase welding productivity by up to 70%. 50 years of productive, high-quality welding – for half a century, we have been designing and manufacturing welding positioners for demanding and heavy workpieces. Pemamek welding positioners combine modern design with reliable, efficient technology and can be seamlessly integrated into any other PEMA solution. Each of our welding positioners is designed in-house and manufactured using high-quality components. We are the official PEMA representative for Southern Germany. We still have several APS older generation positioners in stock. The new APSI generation is already available from stock. Nodpfx Absg Urz Hjbjcl