Stojalo za ovratnik

Stahl 2,1 m Regal Hoehe 2,17 m

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance Lodoh Ek Daopfx Ac Uoaf - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Leto izdelave: 1990, stanje: zelo dobro (rabljeno), used T-slot angle plate Technical data: Dimensions Ljdpfjgwxmxsx Ac Ueaf Height: 1120 mm Width: 320 mm Slot width: 20 mm with - 7 horizontal T-slots used, in good condition

Stanje: pripravljen za uporabo (rabljen), Dolžina 6000 mm Širina 2500 mm Skupna potrebna moč / kW Brez PC-ja in programske opreme D׊×V: 6000×2500×350 mm brez vakuumske plošče Lasdsud Il Sopfx Ac Uef Izvedba po DIN876/II

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Technical data: Maximum clamping force: 3,500 kN Maximum holding force: 3,850 kN Opening stroke: 725 mm Minimum mould installation height: 400 mm Maximum mould installation height: 900 mm (extended) Clamping platen (H x V): 1,168 x 1,144 mm Clear tie bar distance (width x height): 830 x 830 mm Maximum mould weight: 6,600 kg Maximum weight on movable clamping platen: 3,800 kg Maximum weight on fixed clamping platen: 5,100 kg Ejector stroke: 250 mm Increased ejector force: 100 kN Maximum ejector speed: 270 mm Screw diameter: 60 mm Injection pressure: 2,426 bar Maximum injection volume: 891 cm³ Maximum injection speed: 160 mm/s Maximum dosing stroke: 315 mm Maximum nozzle stroke: 520 mm Nozzle immersion depth: 20 mm Back pressure programmable over dosing stroke Installed cylinder heating: 23.1 kW Material hopper volume: 110 l Weight: approx. 21 t Accessories: Robot: Manufacturer: SEPRO ROBOTIQUE (France) Model: 5T35 2000/900/TE-1800 Year of manufacture: 2023 Stroke: 2,000 mm Speed: 3.5 m/s Horizontal demoulding stroke Y-axis: 900 mm Vertical demoulding stroke X-axis: 1,800 mm Robot console on fixed clamping platen Gripper function R1 (C) axis pneumatic 0° - 90°, including quick-change plate Weight: 583 kg MuCell integration (special option includes): • Plastification cylinder with pneumatic shut-off nozzle without mixing element and without non-return valve; • Interface (communication and emergency-stop interface); Lsdpfxjy Hmfyo Ac Ujaf • Software including functional screens for MuCell control; • Adapted nozzle chamber guard; • Position-controlled high-speed screw (analogous to ZE388) Conveyor belt: Width: 870 mm Useful width: 800 mm Length: 3,500 mm Height: 880-1,220 mm Load capacity: 38 kg/m² Belt speed: 5.7 m/min Number of frames: 2 Clear tunnel height: 500 mm This injection moulding machine is fully equipped!! Condition: As new condition, only 5,290 operating hours

Stanje: rabljeno, Leto izdelave: 2001, Tehnične podrobnosti: Premer struženja nad posteljo: 410 mm Premer struženja nad prizmatičnim suportom: 200 mm Dolžina struženja: 950 mm Širina postelje: 330 mm Premer struženja nad suportom: 410 mm Hod suportne sani: 630 mm Višina konice: 200 mm Krmiljenje: Siemens/Weiler D2 Premer rezkalne vretena v prednjem ležaju: 90 mm Premer vretenine: 54 mm Območje vrtljajev: 1 - 3000 min⁻¹ Pomikalna hitrost: 0 - 20 mm/obrat Hitri pomik - vzdolž/prizmatično: 10/5 m/min Konjiček, vpeta glava: MK 4 Premer pinole: 65 mm Hod pinole: 120 mm Lajdpfx Aozd Sg Isc Usf Teža stroja ca.: 2,1 t Dimenzije stroja pribl. D x Š x V: 2,3 x 1,4 x 1,7 m E35 ni zgolj ročni stroj in tudi ne klasični CNC, ampak hibrid: Delo kot na konvencionalnem stružnici Samodejni cikli s pritiskom na gumb Brez zapletenega programiranja Izjemno hiter pri izdelavi posameznih kosov in manjših serijah Primeren tudi za operaterje brez CNC-znanja Weiler sam opisuje takole: Preprosti deli kot konvencionalno Kompleksni deli kot CNC, vendar enostavneje

Stanje: novo, Leto izdelave: 2026, Metalclean - P100 naprava za pršenje iz nerjavnega jekla Enorezervoarska naprava za pranje s pršenjem z vrtljivim košarom. S pnevmatskim ločilnikom olja z membransko črpalko Lsdpfx Acoir Aqds Usaf - Premer košare: 970 mm - Uporabna notranja višina: 540 mm - Nosilnost košare: 200 kg - Kapaciteta polnjenja: 210 l vklj. dodatna oprema: - Neposreden pogon - Kontrola nivoja - Zaklep pokrova - Filter za ostružke/delce s pokrovno pločevino za kopel Tlak pršenja = 5 bar Obratovalna napetost = 3 x 400 V/N/PE 50 Hz Odvod pare

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1975, travelling arm 1200MM, head travel on bed 1400MM, universal head, portable radial Laodpfx Acevm Akgo Ujf

Leto izdelave: 1984, stanje: zelo dobro (rabljeno), Technical Data Manufacturer: Stiefelmayer Model: C-MAN Serial No.: 432309901 Lajdpfehpzbcox Ac Ujf Year of manufacture: 1990 Column cross-section: 160/160 mm Cross arm: 80/80 mm Measuring Range X = 4400 mm Y = 1600 mm Z = 1800 mm The machine can be upgraded with new accessories according to customer requirements. Price: on request! Setup and commissioning available! We would be happy to provide you with a detailed quotation. Note: Our offer is directed exclusively at professional customers. (Specifications, information, and prices are subject to change and prior sale!)

Stanje: rabljeno, Tehnične podrobnosti: Ledsv S Ay Sspfx Ac Usaf Sposobnost vrtanja v jeklu (premer): 32 mm Izravnava: 1000 Maksimalna višina obdelovanca: - mm Premer stebra: 300 mm Horizontalni pomik vrtalnega vozička: 400 mm Razdalja miza-spodaj vretena: 200 mm Vpenjalni konus vretena: MK 4 Hod vrtalnega vretena: 200 mm Območje vrtljajev - brezstopenjsko: 18 stopenj 14-710 obr/min Zasukalno območje izravnave: 360 stopinj Pomik: 0,09/0,12/0,25/0,5 mm/obrat Teža stroja pribl.: 2,0 t Dimenzije stroja pribl. DxŠxV: 2,4 x 0,9 x 2,4 m Prenosljivo! Upravljanje preko pritiskalnega stikala Podporne noge 4x D=16x30mm, po višini nastavljive 60 mm z ragljo ključem

Leto izdelave: 1986, stanje: rabljeno, x-axis travel 2400 mm y-axis travel 1600 mm z-axis travel 1800 mm Total power requirement kW Machine weight approx. 3300 kg Space requirement approx. m S T I E F E L M A Y E R Manually movable 3D measuring and marking machine Type: System C - 160 Year of manufacture: 1986/1999 Measuring stand no. 2429 08 85 Working area: X-axis (horizontal) approx. 2,400 mm Y-axis (cross) approx. 1,600 mm Z-axis (vertical) approx. 1,800 mm Worktable size: 3,000 x 2,000 x 360 mm Height of worktable above floor: 700 mm Thickness of worktable approx. 360 mm Total machine height: 2,800 mm Weight approx. 3,300 kg Special features / Accessories: • Measuring table divided into 2 halves of 1,500 x 2,000 mm each • Side-mounted measuring carriage system System C with cross-section 160 x 160 mm or 80 x 80 mm for the Y measuring arm • Lateral ruler stops approx. 2,200 mm long • Mounted MZ 2000 digital display with network connection and RS232 interface, and all functions for model making • 10 height-adjustable leveling feet • Extensive accessories for marking and measuring • Including RENISHAW touch probe Condition: Good to very good – as inspected, available from stock under power Delivery: ex stock – as seen Payment: strictly net – upon receipt of invoice Ledpfxot Hwxns Ac Ujaf We look forward to receiving your order. We also have other measuring machines and plates in various sizes available from stock. Please contact us for more information.