Mobilni ekstrakcijski sistem

Spänex SMU 45

Stanje: novo, Exhibition machine Type A according to DIN EN 16770:2018 Without fire extinguishing system, tested in accordance with GS-HO-07 test principles of the BGHM. The dust extractor is a mobile extraction and filtration unit for industrial applications, designed for placement in the work area. The dust extractor is suitable for collecting, conveying, and separating dry wood, paper, or plastic chips and dust at various processing machines. Comprising a vacuum-resistant housing with suction nozzle and non-return flap, antistatic filter elements with jet-pulse cleaning, a high-performance radial fan with three-phase motor (energy efficiency class IE3) located on the clean air side, as well as integrated exhaust silencing and air outlet grille. Equipped with 2 swivel and 2 fixed castors, 2 chip containers with collection bags, and a control system with 5 m connection cable and CEE appliance plug. The control system is designed for automatic operation. Automatic start control for up to 6 machines and automatic filter cleaning with runtime extension are included. For automatic startup, either monitoring coils or volt-free machine contacts can be used. Single-coat PVC paint finish in RAL 9006 (white aluminum). Delivery in fully assembled, ready-to-operate condition. For filter cleaning, adequately prepared compressed air must be provided on-site (connection via plug nipple NW 7 / 6 bar). Technical data: Suction nozzle: Ø 250 mm Residual dust content: < 0.1 mg/m³ H3 Filter area: 21 m² Cleaning: Offline - compressed air jet pulse Compressed air supply: 6 bar (connection via plug nipple NW 7) Airflow: 4,500 m³/h Rated airflow (at 20 m/s at the suction nozzle): 3,530 m³/h Negative pressure (at suction nozzle, rated airflow): 2,700 Pa Sound pressure level MAX (distance to unit 1m): 67 dB (A) Fan motor: 5.5 kW, 230/400 V, 50 Hz, 3,000 rpm, IP 54 Operating mode: continuous, intermittent Collection drum volume: 2 x 165 l Dimensions (L x W x H): 2,130 (2,540) x 900 x 1,962 mm Weight: approx. 705 kg Accessories: 1 frequency converter 5.5 kW for the fan of the SMU dust extractor, manufacturer Eaton (Item no. 114004) with control integrated into the dust extractor’s control panel to maintain constant airflow during filter saturation, including safe fan shutdown during filter cleaning. Individual adjustment of suction pressure / airflow as required. The converter increases system efficiency, saves energy, and reduces wear on materials and machinery. Technical features: - Motor rating 5.5 kW, - Integrated PID controller, - Automatic energy optimization, - Integrated manual/automatic changeover, - Commissioning menu for rapid parameter setup, - Integrated radio interference filter according to EN 55011-1B, - Synchronization with freely rotating motor shaft, - Including pressure transducer 0-50 mbar (pressure cell). Prodpfx Anovwfu Nopjc 1 slide valve control for 1 – 8 processing machines (Item no. 113197) Activation of up to 8 electro-pneumatic shut-off valves in the extraction ductwork at the respective processing machines, triggered by volt-free contacts or monitoring coils on the machines. 8 monitoring coils STWA1 (Item no. 600668) for contact monitoring at the processing machines, suitable for all STW types.