Stiskalnica za furnir

SORMEC 350X130

Stanje: rabljeno, Število vreten: 10 kos. Delovna širina: 230 mm Višina skobljanja: 160 mm Motor podajalnika: 5,5 kW Podajalna hitrost: 6-36 m/min. Lodsw H Iv Tspfx Ab Tsri Stružno-kalibracijski avtomat Weinig Unimat 23EL za štiristransko skobljanje in profiliranje lesa z mobilnim vretenom za samodejno nastavitev ter utornim ležiščem za kratke in ukrivljene obdelovance ter z dolgo ravnalno mizo. Vreteno 1: spodaj / 5,5 kW / 40 mm Vreteno 2: desno / 11 kW / 40 mm Vreteno 3: levo / motor skupaj z vretenom 2 / 40 mm Vreteno 4: desno / 11 kW / 40 mm Vreteno 5: levo / 5,5 kW / 40 mm Vreteno 6: zgoraj / 11 kW / 40 mm Vreteno 7: spodaj / 11 kW / 40 mm Vreteno 8: zgoraj / 7,5 kW / 40 mm Vreteno 9: spodaj / 7,5 kW / 40 mm Vreteno 10: univerzalno / 4 kW / 40 mm

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1991, Torwegge multi-blade saw Ledsucnukspfx Ab Teri Chain width: 250 mm Cutting height: 100 mm Total connected load: 39 kW

Leto izdelave: 2003, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Drying chamber Manufacturer: Mühlböck Model: ZLSM Year of manufacture: 2003 Internal dimensions approx. 7400 x 4500 x 4250 mm (LxWxH) 3 fans, each 3 kW 10 measurement points With frequency converter With control system Heating capacity: 223 kW Water temperature: 85 °C Water throughput: 14 m³/h Voltage: 230/400 Volt Connected load: 12 kW Lodpfx Aewr Tzfjb Tsri Fans: 3 x 3 kW Control system: MB Intellevent 5000 program

Stanje: dober (rabljeno), Throughfeed line for processing door leaves, high-performance machine, processing of one leaf—lock case, handle, and hinges—in approximately 30 seconds. Lrsdouq Scpjpfx Ab Tsi The machine consists of two units, each with a left and right section performing specific operations. In the first unit, the left section mills the faceplate recess for the lock and drills holes for the handle and key; simultaneously, the right section drills the hinge holes. In the second unit, the left section makes and deepens the lock pocket, while at the same time the right section installs the hinges.

Stanje: dober (rabljeno), Koda: 0136 Znamka: ITALPRESSE Model: FORMATIC 20.9 Hidravlična membranska stiskalnica Obojestransko lepljenje furnirja na panele, ki so na eni strani oblikovani ali profilirani, na drugi pa ravni – za lepljenje vhodov na omarice, čelne stranice predalov, pisalniške in konferenčne plošče, kuhinjske delovne plošče ipd. 3D lepljenje plastičnih folij (PVC, PPE, ABS, transfer folije) na panele, ki so oblikovani ali profilirani na eni strani – za izdelavo vrat omaric, čelnih stranic predalov, pisalniških in jedilnih površin, kuhinjskih pultov, prodajnih pohištvenih elementov, notranjih vrat itd. Dimenzije plošče: 2000 x 900 mm Razmak (daylight): 325 mm Lrodopbvqvopfx Ab Tsi Hod cilindra: 325 mm Grelec – električni kotel: 27 kW Tlačna sila: 300 ton Število tlačnih cilindrov: 3 Moč hidravlične enote: 5,5 kW Manometer za kontrolo tlaka Avtomatska ponastavitev tlaka Časovnik odpiranja Skupne dimenzije (DxŠxV): 3300 x 1400 x 2400 mm Teža: 8100 kg

Stanje: rabljeno, Weinig Unimat 23 Technical data Lredpfx Abjncc Igj Tsi Working width: 30 - 230 mm Working height: 19 - 200 mm mounted on a pedestal u- re-li-o-u.o Without feed unit machine only The machine is dismantled and immediately available Transport can be arranged

Stanje: dober (rabljeno), Leto izdelave: 1973, Weinig Planing Machine 4-sider / U250 / Unimat 250 Planing width: 250 mm Planing height: 120 mm Bottom spindle 7.5 kW Right spindle 5.5 kW Left spindle 7.5 kW Right spindle 7.5 kW Top spindle 7.5 kW Bottom spindle 7.5 kW Saw unit spindle 7.5 kW Includes planing heads Includes milling tools Includes knives Lredpfsrigq Sex Ab Tji Includes all accessories Good condition - immediately available Location: Austria, near Sankt Pölten

Leto izdelave: 1998, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Vanicek drying chamber with log wagon with entrance and exit gates (hinged doors) with control system and electrical control cabinet Dimensions: internal length 13.05 m, width 4.00 m, height 2.80 m Fan VMR 71-05-4, electric motor 1.1 kW/400V Dehumidification Ø 50 with actuator Dehumidification Ø 40 with actuator UGL sensors, humidification, heating valve (provided by customer) Control unit, heating coil, fan frame Ledpfx Aowxdqkob Tsri Stacking dimensions 1x12.5, 2x1.20, 2x1.00 m

Stanje: dober (rabljeno), Item: D-1035 Double Bulk Feeder with Portion Weigher. Completely stainless steel. Dimensions: Hopper L 1800 x W 850 x H 1300 mm Lift: 460 mm, Small lift 100 mm, Flight 80 mm Lodpfed Nk Ucsx Ab Teri Length 2700 mm + Weigher 500 mm, Total Length 3200 mm

Stanje: rabljeno, Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, dolžinski omejevalnik: 3.200 mm, premer orodja: 400 mm, premer vretena: 50 mm, pomik vretena: 640 mm, največja hitrost vretena: 3.000 obr/min, dolžina vretena za rezkanje: 320 mm, premer žaginega lista: 400 mm, vrsta nastavitve višine: električni, vrsta vhodnega toka: Klimatska naprava, delovna višina: 130 mm, delovna širina: 200 mm, SCM Windor 60/100 – Angular Processing Centre Manufacturer: SCM Group Lredex Nqqxspfx Ab Tei Year of manufacture: 2005* 1. General Plant Description This production line is a window and door manufacturing line of the type Windor 60/100 by SCM Group, year of manufacture 2005. It is a CNC-controlled angular processing centre designed for industrial machining of frame and sash components. The system is engineered for series production, enabling precise and reproducible machining through integrated process steps. 2. Main Components of the System 2.1 Angular Processing Centre SCM Windor 60/100 The SCM Windor 60/100 features a modular design and is constructed as an angular system. Machining takes place on a tenoning side and a profiling side arranged at right angles to one another. The plant combines multiple operations such as milling, drilling, grooving, rebating, and tenoning in a continuous CNC-controlled process. Key Features: * CNC multi-side machining * Multiple milling and processing spindles * Automated tool guidance and changeover * High dimensional accuracy and repeatability 2.2 Fleximat Drilling Centre The Fleximat drilling centre is integrated into the system and serves for the precise drilling of joints and hardware fittings. Machining is CNC-controlled with vertical and horizontal drilling units. 2.3 Profiler Centre The profiler centre is designed for profile milling operations, consisting of two processing sides: Right Side: * Lifting spindle with height adjustment * For variable profile and contour processing Left Side: * 24-position tool changer * Automatic tool change to minimise setup times * Suitable for complex profile milling tasks 2.4 Löwer Surface Sander A surface sanding machine from Löwer is integrated into the production line. The machine is used exclusively for surface sanding and improves the surface quality of the machined components. 3. Control, Operation, and Safety The plant is equipped with a CNC control system, which manages all machining sequences, tool changes, as well as feed and spindle movements. Operation is semi- or fully-automated by trained specialist personnel. The safety features correspond to the state of the art at the time of installation (year 2005) and include in particular: * Mechanical safety guards and enclosures * Emergency stop devices * Safety interlocks on moving machine parts 4. Optional Expansion: SCM Topset XL Planer (10-spindle) For expansion of the existing machinery, installation of a 10-spindle SCM Topset XL planer is intended. The machine will be operated as a stand-alone processing station at a separate location within the production hall and will not be directly connected to the CNC control of the Windor system. The system is available and can be dismantled at any time. Dismantling and transport are to be organised by the buyer. Available from: 07/01/2026