Stroj za upogibanje trna

Sommer S65

Stanje: novo, Leto izdelave: 2025, PROFILE BENDING ATTACHMENT PB20 The ideal complement for tube bending on models 3000 and 6000 is the PB20 profile bending attachment. The device can be quickly and easily mounted onto the bending shaft without the need for tools. The workpiece is clamped onto the rotary table using the clamping fixture and pulled around the bending tool. With this system, the lengths of the bent legs can be measured precisely using a length stop and can be bent with high repeatability. TECHNICAL DATA: • Bending capacity, steel 37: 100 x 10 mm, Ø 20 mm • Numerous standard tools available • Special tools possible • Sharp-edge tools with bending radius R2 or 5 mm • Round tools R 10 to 25 mm for bends up to max. 260° (optional) OUR SERVICE: • Welcome to test production at our in-house demo room • Consultation and information meeting at your site • Leasing/financing purchase consultation and processing via JUTEC • Trade-in of your existing machine Iedpfx Ajnh R Eksdkshw • Service contracts and on-site maintenance

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Mandrel Tube Bending Machine S4501 ----- For the production of tube geometries with bending radii from 1.5 x D → Maximum bending performance for tube 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending performance for tube 30 x 30 x 3 mm → Maximum bending performance for tube 42.4 x 2 mm (stainless steel max. Rp0.2 260 N/mm²) → Total connected load 3 kW → Tube feed length approx. 1.5 m Iodpfxstr U Hls Adkshw Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and rotation axes. The control’s touch display enables easy, intuitive programming and operation of the system. After loading the tube, it is clamped in the travelling carriage’s chuck. This ensures precise positioning of the tube and thus enables the creation of dimensionally accurate geometries. Standard equipment also includes a check of the tube geometry before the bending process: if the bending process is started in the wrong position, the machine will not issue a release. This prevents operator errors. Optional additional features provide greater convenience and increase output, thereby improving the system’s efficiency. Data exchange from the optional TBS-3D tube calculation program (PC version) is done via USB stick or network. Existing tube geometries can be imported into the software. Standard equipment: → Servo drive for the bending axis, 1.5 kW → Adjustable rotation speed → Left-hand bending direction → Bending angle resolution 0.1° → Max. bending radius 120 mm → Bending shaft diameter 50 mm → Servo drive for feed → Servo drive for rotation → Three-jaw chuck for tube clamping in the travelling carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction PLC control: → 10" colour touchscreen → ETH 10/100, X2X Link, 2x USB → Foot pedal operation → Data transfer via LAN or USB → Material database Unique graphical programming: simple geometries can be calculated directly at the machine. The control calculates the feed values and the bending angles directly after the length and angle are entered. Power supply: 400V 16A Dimensions: L: 2.3 m x W: 1 m x H: 1.4 m Weight: approx. 1200 kg

Stanje: potreben popravila (rabljeno), Funkcionalnost: nefunkcionalno, Leto izdelave: 2004, CNC Rohrbiegemaschine / CNC tube bending machine Manufacturer: Schwarze-Robitec Model: CNC 80 E-MR Year of construction: 2004/2006 Condition: needs repair CNC: PC control Beckhoff Technical Data: - Maximum tube diameter x wall thickness: 80 mm x 3 mm - Minimum tube outside diameter: 16 mm - Minimum bending radius to center of tube: 25 mm - Maximum bending radius to center of tube: 240 + 50 mm - Maximum bending angle: 180° - Maximum tube lift length: 1000 mm - Bending direction: right - Machine weight: 7,000 kg - Total installed power: 39 kW - Voltage: 400 V / 50 Hz Ijdsxzubvopfx Adkshw - Amperage: 100 A - Machine dimensions: 6.2 x 3.2 x 2 m Equipment / accessories: - Hydraulic pressure and feed for sliding guides - Automatic tube magazine and turning device - Electric mandrel bending device - Pneumatic mandrel rod safety device - PC control Beckhoff - Automatic central lubrication - Laser scanner, safety fence Machine needs repair: The planetary gearbox of the transport trolley is defective and needs to be replaced. Spare part prices according to quote: planetary gearbox €1,674 + gearbox flange €1,850 + pinion €850 + VAT, without installation. Cheap sale in as-is condition. Immediate delivery, free loading onto truck.

Stanje: zelo dobro (rabljeno), EOS Type: EOS M270 Metal Laser Sintering System Laser Sintering Machine Iedpju Ebpcsfx Adkehw 200 Watt Yb Fiber Laser Material processed by the system: Tungsten Laser hours: 8018 Usable build volume: 250 mm x 250 mm x 215 mm (including build platform) Layer thickness: 20 μm or 40 μm Precision optics: F-theta lens, high-speed scanner The system has been retrofitted with a Scanlab hurrySCAN 30 for improved printing accuracy. Focus diameter: 100 μm Dimensions (W x D x H) system: 2,000 mm x 1,050 mm x 1,940 mm Weight: approx. 1,130 kg For additional technical information, please refer to the manufacturer. Scope of delivery: EOS M270, chiller, and software Condition: used (Specifications subject to change and errors excepted!) Further questions can be answered for you by phone.

Stanje: dober (rabljeno),

Stanje: rabljeno, Leto izdelave: 1981, Tehnički detalji: Radna visina: 1100 mm Radni napon: 380 / 50 V Prečnik osovine: 100 mm Ukupna potrebna snaga: oko 15,1 kW Težina mašine približno: 4,5 t Dimenzije upravljačkog ormana DxŠxV: 1,2 x 0,64 x 1,4 m Dimenzije mašine približno DxŠxV: 1,5 x 1,6 x 1,3 m Trenutno se ova mašina za savijanje profila nalazi u tehničkom odeljenju na pripremi! Ihedpfxswh Rq Nj Adksw Mašina za kružno savijanje profila može se koristiti za savijanje čeličnih profila debelih zidova, čeličnih nosača i čeličnih šina. Mašina radi na dve brzine menjača: 0-4 o/min i 0-6,5 o/min. - 1x pogonski valjak može se vertikalno podešavati za 140 mm - 2x pogonska valjka sa razmakom osovina 360 mm - Desni i levi smer obrtanja valjaka Oprema: - Hidraulični agregat proizvođača TOS - Upravljački pult Pribor: - razne valjke za savijanje bez profila

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1998, Zmogljivost upogibanja pri jeklenih ceveh: 60x3 mm Zmogljivost upogibanja pri nerjavnem jeklu: 60x2,5 mm Isdpfoyhgv Hox Adkshw Zmogljivost upogibanja pri polnem materialu: 35 mm Hitrost upogibanja: 2 obr/min Zmogljivost upogibanja pri trdem bakru in aluminiju: 64x4 mm Maksimalni polmer upogibanja: R10-R300 mm Skupna potrebna moč: 1,5 kW Teža stroja cca: 130 kg

Stanje: pripravljen za uporabo (rabljen), stroj za razširjanje in ožanje cevi 1 glava Orodje ni vključeno (ob zahtevi lahko dobavimo) Hod: 150 mm Ihodpfxewrt Tuj Adkew Moč: 11 kW Dimenzije: 2200 x 800 x 1200 mm Teža: 500 kg

Stanje: zelo dobro (rabljeno), Trumpf Model: TruPrint 3000 G02 The machine is in very good condition and has been professionally tested for functionality at our facility by a TRUMPF technician. We offer a 6-week warranty on the machine. Year of manufacture: 11/2017 Beam-on time: 17,731 hours Ihodpfsvvl I Tox Adkjw Laser Metal Fusion machine (metal 3D printer) Flexible solution for industrial additive manufacturing. The TruPrint 3000 is a versatile medium-format machine (LMF / PBF / LPBF) with industrial part and powder management. Effective immediately, benefit from increased flexibility, quality, and productivity for your additive series production: Productivity is nearly doubled regardless of part geometry, and part costs are significantly reduced. Automatic monitoring and calibration of the multi-laser system during the build job enables optimal quality for multi-laser printed parts. Latest advances in shielding gas guidance further enhance part quality and reproducibility. This is documented in parallel to the build job via melt pool monitoring. Compliance requirements, for example in the medical field, can thus be met. The TruPrint 3000 is highly flexible and can be adapted to the individual requirements of our customers. With a build volume of 300 mm diameter and 400 mm height, it is suitable for use in a wide range of industries. Depending on part size and complexity, workflow preference, and production volumes, you can choose between internal or external unpacking—all under shielding gas. The latter additionally minimizes 3D printer downtime through simultaneous main-time operations. Technical Data: TruPrint 3000 Build volume (cylinder): Diameter 300 mm x 400 mm height Processable materials: weldable metals in powder form, such as stainless steels, tool steels, aluminum, nickel-based alloys, cobalt-chrome, copper, titanium, or precious metal alloys. Current material and parameter availability on request. Preheating (standard) up to 200°C Maximum laser power at component (TRUMPF fiber laser): 500 W Beam diameter: 100 – 500 μm Layer thickness (individually adjustable): 20 – 150 μm Exposure speed (powder bed): 3 m/s Build rate: 5 – 60 cm³/h Connections and Consumption Electrical connection (voltage): 400/460 V Electrical connection (current): 32 A Electrical connection (frequency): 50/60 Hz Shielding gas: nitrogen, argon Design Dimensions (including filter) (W x H x D): 3385 mm x 1435 mm x 2225 mm Weight (including powder): 4300 kg The system was dismantled by the manufacturer, with disassembly and functionality protocols available. All axes have been professionally secured. The system was used with materials 1.44.04 and most recently with AlSi10Mg. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data and information excepted!) We will gladly answer further questions by phone.

Stanje: novo, Shaft diameter: 180 mm Upper roll diameter: 60 mm Lower roll diameter: 50 mm Working speed: 5 m/min Motor power: 3 kW Length: 1200 mm Width: 850 mm Height: 1200 mm Approx. weight: 1000 kg Technical Data: - Welded steel frame construction - 3 driven rolls - Hardened and ground shafts made from high-strength special steel - Rolls are hardened and ground - Horizontal and vertical working positions - Hardened standard rolls - Mobile control panel - Angle side guide rollers - Equipped with brake motor for precision bending - Digital displays (2 units) Options: - STANDARD digital display - NC unit, 7" screen, EURO 9,000 Ijdpfxjd Ab H Ns Adkshw HPK 50 File Type Size Min. Dia Notes 1 60x10 20x5 500 250 Standard Rolls 2 80x20 50x5 500 250 Standard Rolls 3 32x32 12x12 400 250 Standard Rolls 4 Ø35 Ø10 350 250 Optional Rolls 5 Ø60x2 Ø15x1.5 600 200 Optional Rolls 6 2”x3.9 1/2”x2.7 400 200 Optional Rolls 7 50x25x3 20x15x2 450 250 Optional Rolls 8 45x3 20x2 600 300 Optional Rolls 9 60x60x6 30x30x4 650 350 Optional Rolls 10 50x50x5 30x30x4 550 350 Optional Rolls 11 60x7 20x3 550 250 Standard Rolls 12 50x6 20x3 500 250 Standard Rolls 13 60x7 20x3 500 250 Standard Rolls 14 UPN 80 UPN 30 600 250 Optional Rolls* 15 UPN 65 UPN 30 600 250 Standard Rolls* * Special washer (spacer) may be required / Only with special beam bending attachment • Capacities specified for 260 N/mm² plate yield strength