Vpenjalna glava, silovni vpenjalnik

SMW HFK S 160-45

Leto izdelave: 2019, obratovalne ure: 4.525 h, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 12, STROJ ZA LUŠČENJE IN RAVNANJE PALIC V KOMPLETU Oprema je v brezhibnem delovnem stanju in jo je mogoče preizkusiti pod napajanjem. Popolnoma prenovljena leta 2019 (popolnoma nova mehanika in elektronika). Delovno območje: Ø 20 – Ø 80 mm Dolžina palic: 2,5 – 6,0 m Obdelovalna toleranca: ISO h9 (možna tudi h8) Globina luščenja: do 3,5 mm, odvisno od vrste jekla Vrste jekla: ogljikovo jeklo, ležajno jeklo, vzmetno jeklo ipd. Hitrost podajanja: digitalno nastavljiva 0,5 – 12 m/min Število vrtljajev glave za luščenje: do 1700 min⁻¹ Rezila: dva kompleta po 4 nože z avtomatskim digitalnim pozicioniranjem (trikotni in dolgi noži) Avtomatska nalagalna miza s števcem palic Podajni valj z motoriziranim nastavljanjem višine Vhodni tlačni valji – 4 vertikalni valji z invertnim DC motorjem Stroj za luščenje sestoji iz: - Sprednji vodilni sistem - Glava za luščenje s 4 noži - Zadnji vodilni sistem Voziček za izvlek palic Nedpfjwqb Scjx Alteld Glavni motor in prenos Izhodni stiskalni valji – dvojni Odlagača miza z motoriziranim nastavljanjem višine Zbiralnik s števcem in avtomatskim prevzemom končanih palic Hidravlična enota – povsem nova Električna omarica – nova, z dvema moduloma.

Stanje: rabljeno, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Njdeuz If Nepfx Alteld Serial No.: P07 Year of Manufacture: 2007 Rolling Force: max. 24 tons Tool Diameter: max. 270 mm Roll Spindle Diameter: 69.85 mm Tool Bore Diameter: 70 mm (nominal diameter) Mounting Length, Tool Length: max. 180 mm Workpiece Diameter: max. 50 mm Hydraulic Motor Power: 3 kW Roll Drive Motor Power: approx. 5.5 kW Mains Connection: 400 Volt, 50 Hz, 10 kW - Pivoting roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gear shift - Hydraulic system integrated in machine frame - Operating manual with electrical diagram Space requirements (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge rolling: The thread rolling dies, with the same pitch as the workpiece, form the thread by pressing into the workpiece up to the nominal diameter. The thread length is at most as long as the width of the rolling dies. Through-feed rolling: Used when the thread length exceeds the width of the rolling dies. Through-feed dies have three functional zones – lead-in, calibration, and lead-out. Knurling Rolls: These rolls have no pitch and are swiveled at the pitch angle of the profile to be rolled. Pitch Rolls: Pitch rolls have a profile with a pitch, differing from knurling rolls. The sum of the pitch angle and swivel angle determines the pitch angle in the finished workpiece.

Stanje: rabljeno, Leto izdelave: 1961, Premer obdelovanca - maks. 100 mm Njdpfx Ajwwl I Ijlteld Premer obdelovanca - min. 10 mm Dolžina obdelovanca 1000 mm Skupna potrebna moč 16 kW Teža stroja cca 3 t Potrebni prostor cca 0 m Vodila so bila obnovljena pred 10 leti.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Premer kolesa - maks. 130 / 80 mm Njdsxlug Hspfx Altsld Širina kolesa 180 mm Modul - maks. 4 Modul - min. 0,5 Vretenaste hitrosti - brezstopenjsko 300 - 3000 obr/min Krmiljenje Siemens 840 D x-hod 200 mm y-hod 170 mm z-hod 250 mm Rezkalna glava - nagibna + / - 45° Premer mize 168 mm Luknja v mizi 65 mm Največja vpenjalna dolžina 245 mm Območje vrtenja mize 0 - 1000 obr/min Skupna potreba po moči 51 kW Teža stroja pribl. 9,2 t Prostor za postavitev pribl. 4,5 x 4,0 x 3,2 m

Stanje: dober (rabljeno), globina vrtanja: 1.500 mm, dolžina podajanja os X: 2.000 mm, dolžina pomika po osi Y: 1.300 mm, dolžina podajanja os Z: 1.500 mm, Manufacturer: TBT Tiefbohrtechnik Model: BW 250-S Control: SIEMENS 840D Year of manufacture: 2007 Drilling, milling, and tapping machine for heat exchanger bases and plates Swiveling A-axis: +25° to -15° Filtration and coolant system: 1,000 L Chip conveyor: 2,000 x 1,200 mm – output height Milling tool changer, tower station, 20 positions ELB drilling capacity: 3 – 35 mm Nlodpfx Aev A Uw Delted Milling capacity: 250 cc/min Feed rates on all axes (X-Y-W-Z): 15,000 mm/min Approx. 15,000 spindle hours Comes with a large tooling package Specifications Metric / US Standard Max. drill diameter (steel): 40 mm Drilling depth: 1,500 mm X-axis travel: 2,000 mm Y-axis travel: 1,300 mm Z-axis travel: 1,500 mm W-axis travel: 750 mm Table load capacity: 15,000 kg Table dimensions (L x W or Ø): 1,600 x 1,200 mm Spindle taper: HSK 63 Mk Spindle power: 11 kW Spindle speed: 8,000 rpm Dimensions (approx.): Length: 7,200 mm Width: 7,800 mm Height: 4,250 mm Weight: 23,000 kg Please note: The information on this page has been provided by us and, where possible, obtained from the manufacturer to the best of our knowledge. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, they do not constitute representations or contractual terms. We recommend verifying all critical details.

Stanje: novo, minimalni premer metričnega navoja: 3 mm, največji premer metrickega navoja: 16 mm, skupna masa: 500 kg, dolžina podajanja os X: 3.000 mm, dolžina pomika po osi Y: 1.500 mm, dolžina podajanja os Z: 200 mm, vrtilni moment: 24 Nm, največja hitrost vretena: 3.000 obr/min, hitrost vretena (min.): 50 obr/min, moč: 0,005 kW (0,01 KM), The CMA 3-axis controlled tapping center is designed, among other things, for post-processing of laser-cut sheet metal parts and complete machining of, for example, small parts and tubes. The machine offers the following machining capabilities: - Tapping - Drilling (standard / with chip breaking / tube drilling cycle) - Countersinking - Flow drilling (with optimized feed curve) - Reaming - Simple graphical programming - Import of 2D DXF or DWG files - Machine table according to System 28 (similar to e.g., Demmeler and Siegmund welding tables) Noderbz T Nopfx Altold - Radial tool compensation via patented tool holder (accessory) - Tool probe for length measurement and as a breakage detector - Intuitive safety system using light barriers Standard version: Automatic tool changer with 10 positions, mounted on the machine gantry

Stanje: novo, Bernardo TM 36 BLO/ R 1200 Electric Tapping Machine Technical Specifications Tapping Capacity*: M5 - M36 Tool Holder: GT 24 Max. Speed: 30 - 150 rpm Adjustable Angle: 0° - 90° Max. Working Radius: R 1200 mm Quick-Change Collets (DIN 376): M5-6 / M8 / M10 / M12 / M14 / M16 / M18 / M20 / M22-24 / M27 / M30 / M33 / M36 Motor Power: 1200 W Voltage: 230 V Approx. Weight: 35 kg * For material strength of 400 N / mm² Scope of Delivery: - Operation via touchscreen - Digital drilling depth display - Micro-spray system - Chip blower unit - Quick-change tool holder - Quick-change collets according to DIN - Electric motor - 90° angle adjustment - Mounting flange Features: - Fitted as standard with a micro-spray system for constant cooling and minimal coolant consumption Nsdpopag R Rjfx Altold - Includes chip blower unit for removing chips, ensuring optimal view of the borehole - Includes quick-change collet for use with taps for through and blind holes - Swiveling motor unit allows tapping at any desired angle between 0° and 90° - Higher accuracy compared to manual tapping; threads are guaranteed to be perpendicular (90°) - High productivity, significant time savings compared to manual tapping - Quick-change collet with integrated slip clutch prevents tap breakage - Includes swivel arm with large radius for easy positioning of the tap to the workpiece - Suitable for tapping in steel, stainless steel, aluminum, and non-ferrous metals Price: Base frame 900 x 600 mm with 2 drawers for TM series €830.00 plus 19% VAT

Stanje: rabljeno, Leto izdelave: 2006, Polni premer vrtanja / mm Globina vrtanja / mm Število vreten / Froriep CNC stroj za globoko vrtanje – strokovnjak za predhodno obdelavo Leto izdelave: 2006 Krmiljenje: Siemens Sinumerik 840D Maks. globina vrtanja: 8.850 mm Premer obdelovanca: 150 – 900 mm Območje vrtljajev: 1 – 300 min⁻¹ Pomik: 0,5 – 4.500 mm/min Pogon: 129 kW Premer obhoda nad posteljo: 1.000 mm Vpenjalni premer čelne plošče: 900 mm Nljdpjxgu R Iofx Alted Teža: ca. 47.000 kg Idealno za natančno predvrtanje globokih lukenj – vključno s čelno ploščo in luneto

Stanje: rabljeno, Leto izdelave: 1988, Technical details: Nsdpfew D Aq Tsx Altjld Pressing force: 10 t Maximum workpiece diameter: 40 mm Thread length: 70–80 mm Workpiece diameter min/max: 3 / 40 mm Rotational speed: 47–94 rpm Feed rate: 0.5 – 6 mm/s Stroke: max. 7 mm Total power requirement: 4.68 kW Machine weight approx.: 1.4 t Machine dimensions (W x D x H): 1.4 x 1.4 x 1.7 m Hydraulics dimensions: 0.8 x 1.2 m Hydraulic drive Manual and automatic cycle Adjustable roller speed Maximum thread diameter: 40 mm; Minimum thread diameter: 3 mm Up to max. pitch: 3.5 mm; Max. pitch: 1.75 mm Roll width min.: 80 mm; max.: 120 mm Spindle speed: 47–94 rpm Roller spindle diameter: 40 mm Various rollers as accessories

Stanje: skoraj kot novo (rabljeno), Globinski vrtalni stroj Ryazan model PT295106 x 4000mm Proizvajalec: Ryazan Model: PT295106 Leto: 1985 Stanje: Rabljeno Zaloga številka: 2850 Višina osi: 550mm Kapaciteta vrtanja v polnem materialu: 200mm Največja dolžina vrtanja: 4000mm Glava vretena – votli vreteno: 500mm Hitrosti vretena: 16-250 min⁻¹ Pogon glave: 50/75kW Največja dolžina vrtanja pred glavo: 3500mm Nlodpfxjxzp Rls Alted Največja dolžina vrtanja pri uporabi 500mm votlega vretena: 4000mm